Xbox 360 RGH 3.0 (Chipless Mod)On A Corona 4gb motherboard
HTML-код
- Опубликовано: 11 сен 2024
- This is a tutorial for a RGH 3.0 mod on a corona v1 or v2 4gb motherboard using the 4gb usb tool from weekendmodder.com. If your having problems dumping a 4gb nand this is the video for you .I could not get it to dump with the picoflasher so I made this video for people having this problem .I hope you enjoy the video it took alot of time to put together .Please sub to the channel for more videos !!!!
buy 4gb usb tool = weekendmodder....
resistor value = 1Kohm
I had every system from Atari 2600 thru PS3 as they came out. The Xbox 360 has to be my go to fav. 😊 Followed by original Xbox then Dreamcast.
Those are great consoles .If I had to pick 3 it would be snes ,og xbox and xbox 360 . Ps1 is a must for me as well lol
@@Warranty-Voided SNES I loved 🥰. I kinda got into the PS1 but not as much.
after wasting time on the wrong via by CR35 thanks for the complete video. many guides left out details on the final steps too!
for anyone new coming across this, picoflasher is honestly an easier way to manage corona 4GB nands (6 wires, no crystal wire!) and picos are cheap, recommend it over sd tools
Glad the video was helpful !! I use the 4gb sd tool bc the pico flasher is very hit and miss on reading the 4gb nand .glad it worked for you !!!
@@Warranty-Voided honestly, its getting hit or miss for me too after working great for a couple boards so i might stick to the SD tools
@@barfbot hopefully the pico flasher will get a fix for this at some point
@@Warranty-Voided picoflasher not working on some pico boards after replug and wont find console if pin2 at U1D1 (FLSH_CE_N) has 0v
@@Warranty-Voided. Today I went to do RGH3 read the nand and it went halfway through the read and then it failed saying that the two dumps do not match all my wiring is correct and I was using a pico flash. I made sure every side of joint is perfect and not touching anything. My Xbox 360 slim is a corona version two which does not require a post adapter.
Great stuff man you just earned a sub
Thank you !!! Glad you liked the video !!!!
Years ago i did JTAG and RGH, i mis those days. I really loved to do it, and i did a lot of them. Even for famous webshops in that time. To bad it is not possible anymore.
I miss the 360 days as well. I have recently got back into it and have been playing halo 3 via halo sunrise severs pretty fun . Take me right back in time lol
I had hundreds of 360's bought them in "Lots of broken consoles". JTAG & RGH & Reflowed, controller mods, Leds. I just loved it, such a wonderful time I had. I have been researching and I think 3.0 may be making a slight comeback. I just miss it. That Pi Pico tool is cool. I still have Nand X etc.
@@davidshatusky8755 reflowing is malarkey.
Great video ive got one sitting there I'm going to attempt.
You can do it! Lol
@@Warranty-Voided lol i will certainly try :)
Hahah said the same thing good thing I bought 2 😂
I appreciate the video. Do you know if it is necessary to use the resistor when connecting together those 2 specific points on the backside? I've seen other tutorial videos that say it's optional, but I've never really understood why.
It's safer to use the resistor to protect your cpu . It's not necessary but there super cheap so I would recommend using them . Thank you
I have an xbox with a x360acev3 chip. It worked for like a year then it got these graphical glitches like lines across the screen. Then eventually it just didn't boot anymore. I took it apart to look at it and saw nothing so i booted it up one more time and i doubt taking it apart did actually did anything but it actually worked for like 30 minutes which it had not done for 3 years. Then the same thing happened. Do you have any idea what could be the issue causing the glitches and eventual crash?
I would take it apart and look at the wiring for the x360acev3 chip . Look for broken or faulty wiring .With the lines across the screen makes me think gpu issues or overheating of the gpu maybe new thermal paste. It's hard to say but that's what I would start with.
Flash the original retail Nand back on it and undo the power wire from the chip and boot it. I bet it will E74 or RROD.
Bad solder points. Had the same with another xbox...
Im still looking for a xbox 360 e power board or something along those lines as the power button doesn't work
Hopefully you will find one . Thanks for watching!!
Why is it that you gotta clean the the middle piece with rubbing alcohol?
Not for sure what part your talking about . But I use ipa to clean off flux
Very Cool
Thanks
Lamentable que aun usen resistencias y un simple cable en ves de usar reguladores de voltaje a 1.2v
I didn't know that was a option lol was just following what has been done in the past .
Hi mate, don't suppose you could be of any help? I took my xbox 360 e apart to put on some new paste and my led fan came loose so i took the led fan and all its wires off the motherboard now my rgh is having a black screen when i start it and the controllers don't load up
Is this a extra fan you installed? Or a stock replacement
good vid
Thanks glad you like it !!!!!👍
I have a Corona 4GB with corrupt storage that will not format or update. I tried to dump the firmware with a card reader mod and never could get a connection to the PC. I wonder if that USB tool would work. What is with the firmware chip on the bottom of these boards anyway?
Think of the 4gb usb tool as a sd card reader that you attach the wires directly to .It works the same way as the sd card method and reduces the margin of possible errors.The firmware is the operating system of the Xbox 360 .Thats what your trying to dump ,than decrypt it with the cpu key ,modify it and than upload it back .As far as the hard drive it maybe dead .You can try to hook it up to you computer and format it with windows and if that works put it back in the xbox and format it with tthe xbox .Hard drives for the xbox a pretty cheap these day if that doesn't work .thanks for watching
@@Warranty-Voided Thanks for the reply. No HD though, the 4GB onboard storage. I think is that small chip right next to that pin header you are soldering on.
@@randysmith7094 thats is correct. Does the xbox work properly?
@@Warranty-Voided xbox works with old games but gets error on system update.
@@randysmith7094 man that a new one on me . Idk how you would fix that
Can u fix a ps3 phat backwards compatibility 60gb model bricked stays on for 30-40 s then shunt down no ylod
Does it display anything before it shutdown?
If it boots and shows image, Nec tokin caps.
It may be bad thermal conductivity. The factory thermal compound is garbage. Might need to be delidded and new thermal compound.
Hello, after you hook the 4gb flasher for the nand do you connect power to the motherboard (before you connect to pc)?
I don't think it matters. But I would plug it in after the pc
Are you aware of any way to fix a pulled post via? Every tutorial I see to rgh/jtag requires that post via to be soldered to.
If the post via is pulled and you can't get a wire soldered to it .than you can do this mod it is required. Sorry I thought you were talking about the adapters thanks for watching
POST? Well, It's possible to solder to POST on the top of the motherboard if the bottom point is damage. You can also clamp a postfix adapter on the side of the CPU.
If you are taling about PLL, then it is impossible to fix on the S/E. You need to use S-RGH or Mufas if PLL is damaged on S/E.
I have a 4GB console that requires a POST Fix adapter, I am able to create and write my Xell build but when I plug the console in to get my Key, I get a green light but no video out on any port (component or HDMI), eject button works on the DVD and the drive spins up, I never get a out green dash only the center green LED.
Any help would be appreciated.
Sorry never ran into that problem before . I would check all connections . Hopefully someone will comment with some help for you .
Usually if it doesn't boot it means one of two things:
A. Your wiring is bad, and you'll need to check your solder joints.
B. One time I made the mistake of not building an RGH 3 image, which can also prevent your console from booting xell.
If it's neither of those, your console could also be dead.
A lot of the post fix adapters on the market are cheap and don't work very well. You might need to bend it down and try to get it to make contact
Can you just soder the cable to the crystal without the connector ?
Yes you can . I only did that because you have to disconnect the 4gb sd card tool and than hook it back up . You will just have to remove it and solder it back up
Very good 👍
Thank you very much!!
everything perfect but 4gb usb tool not detected. jrunner detects it but in not show up..
Try a different usb cable also check the orientation of the plug to the xbox header?
@@Warranty-Voided Failed to get DiskGeometry.
@@johnnydasio8701 try a different usb port on your pc . I have never seen that error before
I will do this soon
Nice . Let us know how I goes!
Can I use an Xflasher 360 instead of a 4gb usb tool?
Yes you can
Mi querido hermano, tengo una Xbox 360 tipo gorda, la modifiqué, pero no me apareció el panel azul y ahora el dispositivo está roto, ¿qué debo hacer?😢
What motherboard revision was your xbox?
@@Warranty-Voided jassper 512
@@ameramer-xg4pz I would look for a video for that motherboard .I have never done that motherboard. Sorry I couldn't help more
@@Warranty-Voided Muchas gracias, eres increíble.
hi what if your gpu does not work does this replaces the gpu chip .wil this procedure give you the graphics back
This is not a repair video . It's a how to rgh mod you 360 . It will essentially let you run homebrew and backups
Hello I have xbox 360 s and it was manufactured 28th of may 2010 but xbox 360s was officially released in july is my console rare?
I am not sure . Might want to Google and use forums. I won't be any help determining if it's rare . Thanks for watching
@@Warranty-Voided i didnt found anything
@@ens4r119no it's not lol
How do I know if my x box 360 slim is compatible with this mod(procedure)?
You would have to identify your motherboard version . Lots of pics and info on Google to do so. if it's a corona 4 gb it should work . One other thing you would have to check is if you need a post fix adapter which I went over in the video . Thanks for watching
@Warranty-Voided i have a cornona v1 or v2 but it has post traces but DB3R3 n DB3R4 I Do not see those traces where they should be. My pinouts are not looking like yours. I see DB3R1 DB3R2 DB3R6 DB3R7 But not R3 R4 or even R5 wth. Its killing me right now
@@Warranty-VoidedTo be honest it look like a trinity board with the desolder of the 4gb mu port. The 6 pin traces are there like there was 1 there but some1 desolder it off.
@@theghettotraveler347 the power suppy for your xbox can help identify your motherboard too . If your not finding these solder pads on the silkscreen you probably don't have the right motherboard .
Esa consola es una corona y para que funcione tiene que poner un posfix
This motherboard doesn't need the postfix adapter . I show in the video how to tell if it's need or not . It does work watch the end of the video I show it working lol
I found the same xbox thrown away working
Nice !!!
@@Warranty-Voided Is there a way i can do this with an arduino uno? And what is the cheapest place you reccomend for me to get a controller
@@mecyanned not that I am aware of . I got mine from weekend modder . Link in the description.
@@Warranty-Voided i guess ill do some research :|
What does this mod do and can the console still play on xbox live after
It allows you to play backups and homebrew. And yes you can still play online .I did this so I could run the halo sunrise project
You can play online just don't get your Xbox 360 banned
Ese video esta mal echo es para una xbox 360 Trinity y esa no es una Trinity
This is in fact a corona morthboard not a trinity and the video is right 👌 👍 😉
Ты лучший! Круто!
Thank you
Good
Thank you
thnak u so much
No problem!!! Thanks for watching 👀
Hei bro, I'm using raspberry pico, but in Jrunner it gives me the information Console Not found.. do you know what it could be?
If this is a 4gb model its probably not going to read with the pico . I originally tried with the pico and tripple checked all my connections and I could never get it to read .I suggest you check to make sure all your connections and if you still can't get it the read . Try the tool I used in the video . It's easy to use and worked like a charm . Thanks for watching
Pico is supposed to support the 4gb nand but if you read the forms barley anybody can get it to read.
@@Warranty-Voided I already changed the wires of different materials and it still didn't work.. and I redid all the connections several times and it didn't work :^(
I tried for 3 weeks trying to get the pico to works . Evan bought the pre-made wire set for it . I wouldn't waste anymore time on it . Just get the tool I used in the video .
@@Warranty-VoidedI managed to read the nand through RaspPico.. I changed the USB port and removed the mouse and it magically worked.. I just have another problem! I recorded glitch2m because my card is Corona V6 but the xell appears.. Can you help me ?
Wish the Xbox 360 had softmod I don't want to risk destroying it
That would be nice but I don't think we will ever see one . You can buy modded system for not too much these days .
It's like $20 for another one if you screw one up.
Bro hace un video con el pi pico y los reguladores para esa misma
The steps for the pico would be different.
thermal surface purifierha ha ha!!
I got them together so I figured I would use it . It did them get the remaining compound off though lmao
@@Warranty-Voided you did an excellent job thank you for the video
Can jb xbox 360e 2013
I think it's possible now days . Not for sure though
4gb
Yes this is the 4gb
FRANK. FERRIERAS. 2023. ❤❤❤❤
👍