Hp EliteBook 840 G8 Bios Unlock Step by Step 100% Free
HTML-код
- Опубликовано: 21 авг 2024
- Hp EliteBook 840 G8 Unlock Bios Password Step by Step 100% Free
#computerknowledge #biosfacts #laptoprepair #Borvitech #biosecurity
Here is the Software Hex_workshop v6.8.0 drive.google.c...
This man knows his stuff.... proffesional
Thanks 👍
great video, thank you, it took me a few weeks to get and it was with faulty equipment. finally got it all together, i have 7 blinking lights cap locks. it will not start and its an g7 not a g8, again thank you for your help
The chip is solder properly?
brilliant display, what is the equipment you are using. can you put up a link
Am using a canon 1000d as my desk display and the other cams are hikvision webcam 2mp,, you can go for something higher than this cos I don't have good quality yet. Thanks
Thank you for your reply
put links for software on google drive : and link under bottom of video
Here is the Software Hex_workshop v6.8.0 drive.google.com/file/d/1vobfCOePlTNNeJij5EMLhg5af9qurucn/view?usp=drive_link
Good Video. A question please. Can this work on HP Probook 450 G8 ??
That's a good question,, i want you to do the same procedure on the laptop hopefully it will work
@@borvitech Thank you, I use a different programmer and im getting this error in neo programmer: Connecting Error CH341(Not found)
IC not responding
What could it be please?
@@borvitech My programmer is: ezp2023+ programmer
Hi again. Looks like I have run into a little setback.
I have a Elitebook pro 840 g5. It seems there are 3 Winbond bios chips. Two on the front and one on the back I can't figure out witch one that is the EC chip
Front chip is 25Q256JVEQ and a smaller one under some tape 25Q80DYIG
Back chip is 25Q128JVPQ
Any suggestions?
Would be very appreciated 🙂
Firstly I guess the EC chip is behind the processor,,, and also check how I differentiate between the Main bios and EC chip in the video.. if you have any questions free feel to ask.
Computro ?
Howdy, A question. Will this proceeder work on 840 g5. I have the CH341A. What files do I need to unlock bios and where do I get them.
Thanks.
Great vid 🙂
Yes it will work
you have to watch the video step by step and follow the procedure
@@borvitech I watched your video and I think I got.🙂 Another question that concerns me is! I have this CH341a pro, and my bios is Winbond 25Q128JVPQ will this be supported by the ch431a. Do I have to make any mods to the ch341. Thank you for answering my questions.
Do I have to flash both bios or only the one on the back of the motherboard. The one on the front says winbond 25Q256JVEQ
@@jimsve63 the EC chip is behind the processor side that's the one you need to program watch my video careful and see how I explain it differently
I would like to ask something does it mean if you EDIT it the process won't successfully? I am asking this question beause before i tried to flash different bios but i never win?
Backup the original file and edit the file then program it and put it back to the laptop... The password will be gone 100% free
good video can u make a video on woulf secuerty locked
On this same model???? Try this process to see if it unlock it
PASSWORD GONE BUT SECURITY CONTROLER PROBLEM ERROR
You need to edit file properly
thank you very very much .very nice 🙏🌹
Most welcome 😊
Will this work if SSD is bitlocked ?
SSD is bitlocked and bios is also locked with password
First follow this process to unlock the bios after you install a clean windows then your bidlocker will be gone
Моё почтение.
Какой программатор? Что за программа для чтения и записи прошивки?
I used Ch341A programmer
Hello, where is your address i need to unlock the bios password from my laptop please
You can WhatsApp me
Hi friend, my pc not see any ssd after flash option, do you have any sugg.? Thanks!
Before you unlock was your SSD drive lock with bidlocker???
@@borvitech I don't know, but i fix Just now. Problem was double, first for solder and resolder i move some component on board, and second was the dump that i use for main bios, i flash whit original main bios dump and use only the edited ec, and after i make update directly from bios by using external lan. Now all Is ok, thanks for your precius info!
hi would you happen to know location of bios chip to desolder on Elitedesk 805 G6 SFF
Very Easy to locate it chip,, send a clear photo of both side of the board Email: borvi.tech@gmail.com
Will this work with a hdd password in bios?
Hdd password is different from bios password
Is it possible to do this on the g10?
Perform the same procedure on it and give the feedback
Pls guys I am try to download hex workshop v6.8 hw can I install it I didn’t see keygen pls hw can get the keygen
Download the Software here drive.google.com/file/d/1vobfCOePlTNNeJij5EMLhg5af9qurucn/view?usp=drive_link
@@borvitech thank you very much.I do appreciate sir. pls I want to ask a question hear
Is it possible to edit file from 6th generation to 13th generation on this hex workshop software or only from the systems that have 32mb Ec file
And pls sir.hw can I unlock Lenovo system from 6th generation to 12th generation and Also Dell 8fc8 bios admin password
@@OvienAmbrose-fq1cn your question is some how confusing editing 6gen to 13 gen what do you mean???
@@borvitech thank you very much.I do appreciate sir. pls I want to ask a question hear
Is it possible to edit file from 6th generation to 13th generation on this hex workshop software or only from the systems that have 32mb Ec file
And pls sir.hw can I unlock Lenovo system from 6th generation to 12th generation and Also Dell 8fc8 bios admin password
Good morning sir
Pls teach me hw to unlock dell system 8FC8 password
Hello can i put another ssd. I currently have a 256 ssd. Can i add another ssd ?
Where are you going to put it????? You can only upgrade from 256ssd to a higher size
very interesting video, would you be interested in a working collaboration?
How do you mean??? send me details on email borvi.tech@gmail.com