I’m pretty sure S&T is like a one man operation and he 3D prints everything. I got mine and immediately noticed the same problem. Solution take a file and a dremel to the inside of the magazine extension and the follower and you should be able to make it work how it should. They should work when you get them considering how much they cost.
@@Robertsmith-un5cu honestly I’ve considered it a lost cause, out of the 2 I bought I could only get one 50 working right and even then you’ll need a speed loader to properly seat the rounds. I’d just buy a bunch of oem 30 round mags and only load 20.
I got the squib out while at the range but I couldn't get it to cycle properly after that. Pretty sure there is carbon buildup in the camber. I have to clean and retest
@@kurticus Sorry about that, At first glance it looked like a PMR30, So i thought u added a stock and a bunch of other add ons, Looked it up. nice gun.
what often happens with this type is that the magazine is often not loaded, the ammunition often gets stuck, what's wrong with this weapon, a mgazine or what 😢
Yes, it's an issue with your mag release. Buy the mcarbo mag release. The factory mag release doesn't hold the mag high enough for the round to land on the feed ramp.
I ordered 2 of these and they worked fine until thr 3rd use, then they would jam up and not feed. I emailed the owner several times with no response, they look cool but they don't function and there is no warranty. Bad bad business model
I’m pretty sure S&T is like a one man operation and he 3D prints everything. I got mine and immediately noticed the same problem. Solution take a file and a dremel to the inside of the magazine extension and the follower and you should be able to make it work how it should. They should work when you get them considering how much they cost.
Thank you for being here 💪😎
I'll have to look at smoothing out the insides. For now I've just been loading to 30
Ever get those’d 50’s running right?
@@Robertsmith-un5cu honestly I’ve considered it a lost cause, out of the 2 I bought I could only get one 50 working right and even then you’ll need a speed loader to properly seat the rounds. I’d just buy a bunch of oem 30 round mags and only load 20.
*UPDATE
Stuff and Things sent me a new charging handle free of charge.
Great customer support
Hoping my last one was a lemon
Any change in performance with these products? I ordered just to try my luck. Mag extension and charging handle.
I was gonna test it last week but with my luck I had a squib on round5
I got the squib out while at the range but I couldn't get it to cycle properly after that. Pretty sure there is carbon buildup in the camber. I have to clean and retest
@@kurticus well I will be sure to share my experience when I pick mine up
Dang I was hoping it was a go 😮💨
Where did you buy the Magazine
What’s that reverse faux suppressor you got on there? Looks good
well glad i watched the whole video 😢
what barrel shroud is that?
What brand of arm/shoulder support is that. Link please
It comes with it from the factory
@@kurticus Sorry about that, At first glance it looked like a PMR30, So i thought u added a stock and a bunch of other add ons, Looked it up. nice gun.
@@LALATheClown yeah it's the carbine version of the pmr30
(same lower different upper basically)
what often happens with this type is that the magazine is often not loaded, the ammunition often gets stuck, what's wrong with this weapon, a mgazine or what 😢
Is this a rifle or pistol?
Rifle
Where did you get that front grip?
Stuffandthings
Have you had any problems with feeding when you first got her? I have one that will not feed and don't want to send back!
Yes, it's an issue with your mag release. Buy the mcarbo mag release. The factory mag release doesn't hold the mag high enough for the round to land on the feed ramp.
Ordered thanks hope it works out I love the gun! I have many calibers but 22 mag has a soft spot in my heart!
@@cokfarm1339 I highly recommend getting the entire kit, especially the metal feed ramp.
Update. It's installed and runs great if I only have 15 rounds in the mag anymore and it's malfunction after malfunction!
finally yess
I ordered 2 of these and they worked fine until thr 3rd use, then they would jam up and not feed.
I emailed the owner several times with no response, they look cool but they don't function and there is no warranty. Bad bad business model
The pmr, cmr platform has enough feeding issues with the factory 30 round mags.
Besides the fact that that monstrosity just looks ridiculous.
Cause there new
Keep them loaded for a while
Loctite homie
Haga defense.
Haga overpriced
Awe that sucks
I used Winchester ammo I'll try again and with my usual CCI maximag ammo. If anything changes I'll pin an update in this comment section
@@kurticus any updates?
@@Funnymandias just been loading to 30
I have been using Winchester hollow points tho. I haven't seen target ammo in a month or so.