Thanks man.. you save my life.. I thinked that was a problem with the installation… and after saw your video I did what you said and booom the mic is working… so much thank you from Brazil
Hi and many thanks for the video. Before the video i had no sound in my f48 evo system. Then i did option 2 and concect it to the usb port in the armrest box. Is there a chance to hide the cable or do only step 1 and can forget step 2. Because now with the cable in the armrest box, i can not close the radio front.
Thank you so much for the video, I was able to get the sound to work, but after 2 days I am unable to go back to my original car Idrive display, it says that car display not supported. Any idea on what it could be?
Is the Gnd to Gnd cable required for the EVO version as well? I can’t get any sound working. It’s all wired correctly except for the ground cable if that’s what is needed.
It is need to connect the ground cable , but it all not work , that is other reason , the ground cable can cancel the noise. That is just only one reason , you can check the optical cable movement, and the USB/ AUX adapter connection
Hello I bought this product but until recently I was able to install it, I wanted to ask a question, sound, calls, music and map work very well for me, the problem I have is that when I turn on the car the screen starts and approximately 2 turns off and then turns off It turns on after a minute and then turns off between 23 and 25. After I have reviewed the manual and configuration and I can't find anything, any help or how I ask the manufacturer thank you
Hi have a 6series f06 evo.i cant get sound and i think my usbs are not working so i connected without the usb to aux and pluged the cable straight into the aux and i still have no sound ?
hi, I have a 2013 F31 under NBT, I installed an Android screen on it, I did the optical fiber bypass, but I don't have any sound via the Android screen, I don't have no sound either when I plug in aux via aux under the armrest, I need the USB audio aux adapter do you think? Otherwise what is the problem...? Thanks
Hi, if you could help me i would be so grateful, my car doesn't have th3 optical fiber cables in the 4 wholes and the sounds still not working, what can i do??
The car with or without optical fiber has nothing to do with the sound of android screen, the Android screen, its sound work by AUX , it have two ways : 1) the sound transfer by big power cable ( we call internal transfer) , in that case , although you don’t connect the AUX cable to AUX jack , it also have sound , some cars like NBT cars , it just work like that , but some older cars like CCC or CIC , it might require you to connect the AUX cable to AUX jack, but this has nothing to do with your optical fiber cable, the car with optical fiber cable normally with external amplifier, that kind of car have better on sound effects.
@@HifimaxOfficialhey, I installed mine yesterday and I do have sound from radio and BT music. When I make a phonecall I do not have sound from speakers and there is no ringtone through the stereo! I have 2015 F10 BMW with NBT. Is it a green optical cable issue? Thanks in advance 😊
I installed android auto in my e81. I have sound by the original radio but not by playing Spotify or navigation. Also i don't have a signal for the original BMW Menü to switch from Radio to AUX. All settings are correct, also plugged in a AUX cable under the armrest. I think something is missing to get to the original BMW Menü but I don't know what. Can you help please?
Thanks , very informative video about common problem. My car play in Bmw goes blank after some time, Any advise on this issue, will be much appreciated
Blank screen normally check steps 1) remove all external kits like USB drive , or SD card or other device that hooked to android screen first , then restart the car ; if not help, 2) can use a needle to press the “ reset button” button, normally the screen design the reset button , if not help 3) better contact your supplier to see if any software update can fix it , 4) if your supplier can not help , 5) you can also check yourself, like this video I made : ruclips.net/video/bTWFqROwuVc/видео.htmlsi=XNFVhYw40hCKDlEB
Is there another way to get Apple CarPlay but play sound through the original Bluetooth? I have a 2013 E92 with CIC, and the sound through Bluetooth sounds so much better than through aux.
I have a strange problem with my aftermarket evo headunitś sound , its working only when the engine is on , when I turn the engine off sound goes totally off , even when I turn to the original unit . Any adivse is very appreciated 🙏
I did everything in this video but when i play RUclips on new head unit through aux it plays for a few seconds and then my car oem menu automatically switches to “music collection “ on its own and no sound.
En uno de los coches con una pantalla similar sólo deja poner Aux rear sabes el motivo? No hay sonido evidentemente no hay manera de poner aux front solo sale aux rear.
it just wire the cable under the centrol console (under the plastic cover), like this video : ruclips.net/video/xLSkppSq-kM/видео.htmlsi=8KLNbdIWj-FvyzPZ
i don't your car model, if the car is CCC, CIC, it need to connect it, if the NBT, it is ok not connect it, if EVO cars, it need to connect the USB/AUX cable (on the back of head unit), some other seller's products, for EVO, it connect the USB/AUX adapter..@@AmZian2
hello everybody my quetion in my originale car bmw x3 2014 havoe no optical fiber cable,and now i did instalted the new display but have no sound but evrything its instaled good the came rare function but have sound when you use it.
I have Android carplay 12 touch screen. I took the optical (green) wires out of original port and install into new port. Still no audio. Can you please advise? Thank you
There is a video about the optical fiber movement, ruclips.net/video/8uobWgYDI1E/видео.html You just notice two points: 1, move to crrect spot, 2) notice the direction of optical fiber cable... my videos always talk "in details" , that way, people can do it themself.
@HifimaxOfficial Thank you! I did actually misplace the optic cable. Now that I have optic wires in the correct place, I still don't have sound or any radio either. Could I have blown a fuse?
@@robpabon3608 please check with your supplier, since it need to check in details (connection, settings and your software MCU version etc), that is impossible to know the reasons by review your message here.
HUD is OEM function , you need access to original menu to use it , if in original menu not work , you can check if the optical fiber cable movement, to check when you moved to new power cable , the optical cable direction correct or not , normal it is upside down then have this problem ,
Guys, I found the issue. In android car settings, remove T-Link app from „Default Navigation App”. You can’t actually de-select it, so just choose something else, I selected „photos” randomly. Now I can hear caller through car speakers using carplay
T-link ? In the default navigation apps, most of time is google maps . Why the “ T-link “ in the navigation app list ? Sorry I don’t clear, maybe your model is different to the one we selling .
I connected the screen and for some reason, without the aux cable plugged in it works but I don't know how. Apple play works but there is a lot of crackling noise when playing music
Got a 2nd hand car with this installed. Didn’t know how it work until I watched this. Very helpful. Thank you.
Glad it helped
Thanks man.. you save my life.. I thinked that was a problem with the installation… and after saw your video I did what you said and booom the mic is working… so much thank you from Brazil
Hi and many thanks for the video. Before the video i had no sound in my f48 evo system. Then i did option 2 and concect it to the usb port in the armrest box. Is there a chance to hide the cable or do only step 1 and can forget step 2. Because now with the cable in the armrest box, i can not close the radio front.
Brother, you ended my frustration with your video!!!!! Thank you very much!!!!! I am back in business!!!!!!!!
Thank you so much for the video, I was able to get the sound to work, but after 2 days I am unable to go back to my original car Idrive display, it says that car display not supported.
Any idea on what it could be?
hello! i had connected a new head unit and i only get sound from the speaker behind the head unit, no sound from the doors or tweeters, how can i fix?
Thanks mine had changed to Bluetooth, changed it back to Aux and problem solved of no sound
Thanks
Is the Gnd to Gnd cable required for the EVO version as well?
I can’t get any sound working. It’s all wired correctly except for the ground cable if that’s what is needed.
It is need to connect the ground cable , but it all not work , that is other reason , the ground cable can cancel the noise. That is just only one reason , you can check the optical cable movement, and the USB/ AUX adapter connection
I installed a car play decoder for my Ford Focus. Why would not you just use Bluetooth for audio?
Hello
I bought this product but until recently I was able to install it, I wanted to ask a question, sound, calls, music and map work very well for me, the problem I have is that when I turn on the car the screen starts and approximately 2 turns off and then turns off It turns on after a minute and then turns off between 23 and 25. After I have reviewed the manual and configuration and I can't find anything, any help or how I ask the manufacturer
thank you
You can contact your seller for support
Thanks, this helped me understand the AUX cable approach and fixed my lack of sound.
Thanks
Hello, for me works only left side
Rigut side sound very weak
Hi have a 6series f06 evo.i cant get sound and i think my usbs are not working so i connected without the usb to aux and pluged the cable straight into the aux and i still have no sound ?
EVO 6 series ? It need to check more details, better contact your seller
hi, I have a 2013 F31 under NBT, I installed an Android screen on it, I did the optical fiber bypass, but I don't have any sound via the Android screen, I don't have no sound either when I plug in aux via aux under the armrest, I need the USB audio aux adapter do you think? Otherwise what is the problem...?
Thanks
2013 model is NBT , the sound work by AUX , not by USB audio ( only EVO by USB/ AUX adapter) .
Hi, if you could help me i would be so grateful, my car doesn't have th3 optical fiber cables in the 4 wholes and the sounds still not working, what can i do??
The car with or without optical fiber has nothing to do with the sound of android screen, the Android screen, its sound work by AUX , it have two ways : 1) the sound transfer by big power cable ( we call internal transfer) , in that case , although you don’t connect the AUX cable to AUX jack , it also have sound , some cars like NBT cars , it just work like that , but some older cars like CCC or CIC , it might require you to connect the AUX cable to AUX jack, but this has nothing to do with your optical fiber cable, the car with optical fiber cable normally with external amplifier, that kind of car have better on sound effects.
@@HifimaxOfficialhey, I installed mine yesterday and I do have sound from radio and BT music. When I make a phonecall I do not have sound from speakers and there is no ringtone through the stereo! I have 2015 F10 BMW with NBT. Is it a green optical cable issue? Thanks in advance 😊
Hi I have installed new screen and new system in f30 2013 from f30 2018 but screen is working half way and no sound . Any help ?
I installed android auto in my e81. I have sound by the original radio but not by playing Spotify or navigation. Also i don't have a signal for the original BMW Menü to switch from Radio to AUX. All settings are correct, also plugged in a AUX cable under the armrest. I think something is missing to get to the original BMW Menü but I don't know what. Can you help please?
Did you find out the problem Iv got the same thing?
Hi friend in my don’t have AUX port Bmw e63 . I fixed CCC player no sound what i can do any advice please..
It need have Aux , if not , no sound . You can ask your local service to add the aux for you
Can we add aux at our car? If so do you have any video about it? Thanks already.
@@HifimaxOfficial
I forgot to mention you sorry
Thanks , very informative video about common problem.
My car play in Bmw goes blank after some time,
Any advise on this issue, will be much appreciated
Blank screen normally check steps 1) remove all external kits like USB drive , or SD card or other device that hooked to android screen first , then restart the car ; if not help, 2) can use a needle to press the “ reset button” button, normally the screen design the reset button , if not help 3) better contact your supplier to see if any software update can fix it , 4) if your supplier can not help , 5) you can also check yourself, like this video I made : ruclips.net/video/bTWFqROwuVc/видео.htmlsi=XNFVhYw40hCKDlEB
Is there another way to get Apple CarPlay but play sound through the original Bluetooth? I have a 2013 E92 with CIC, and the sound through Bluetooth sounds so much better than through aux.
You can consider the Linux screen, the android screen can not use original Bluetooth
Thanks! My problem was The green cable
I have a strange problem with my aftermarket evo headunitś sound , its working only when the engine is on , when I turn the engine off sound goes totally off , even when I turn to the original unit . Any adivse is very appreciated 🙏
Hello. I have a 2011 x5 and I have a carplay installed it lights up but it doesn't sound. Only the cd and the radio works. Need help please
It is OEM screen or Android screen?
@@HifimaxOfficial it's an aftermarket carplay screen
Lleva CCC pero en Factory setings pone CIC hay que poner el software de Android CCC? Para que suene??
Hallo,
Ist es möglich, einen Link zum Kauf des Controllers zu senden, den Sie separat vom Bildschirm verwenden? Formular für Sie aus Deutschland
THANK U SM BRO I BEEN TRYNA FIX FOREVER
I did everything in this video but when i play RUclips on new head unit through aux it plays for a few seconds and then my car oem menu automatically switches to “music collection “ on its own and no sound.
It need to know the car model and year of production and also need to the android screen you installed …. They are different
@@HifimaxOfficial 2015 bmw 428i. Xtrons 14.9 nbt version screen.
En uno de los coches con una pantalla similar sólo deja poner Aux rear sabes el motivo? No hay sonido evidentemente no hay manera de poner aux front solo sale aux rear.
Should I Connect a aux cable from the oem to the audio out??
If so, How can I hide the cable?
it just wire the cable under the centrol console (under the plastic cover), like this video : ruclips.net/video/xLSkppSq-kM/видео.htmlsi=8KLNbdIWj-FvyzPZ
Hi I have the evo system
And tried it through the usb version
Still no sound ?
I hi can’t seem to be able to go back to oem interface the screen just goes black any way of fixing this?
Where can I find the latest setting to use car play to answer phone calls?
No others
@HifimaxOfficial hello, i dont have aux option at the menu. What schuld i do?
It need to add AUX first
Thank you for this mine also changed to bluetooth
I need to install aux cable ? I don’t have optical cable in original système
a lot of cars without optical cable, that is no problem, when the car without optical cable, you just connect the power cable would be fine.
@@HifimaxOfficial thank you , but it is necessary to connect the aux usb cable ?
i don't your car model, if the car is CCC, CIC, it need to connect it, if the NBT, it is ok not connect it, if EVO cars, it need to connect the USB/AUX cable (on the back of head unit), some other seller's products, for EVO, it connect the USB/AUX adapter..@@AmZian2
I have sound but my screen isn't coming on after install.
Can i connect a bluetooth adaptor to the aux output from the screen and connect the car bluetooth to the adaptor?
It not work like that , the sound work through AUX , just connect physical AUX would be fine .
Thanyou my friend
Hello, connected to aux and optical cables are installed correctly still no sound, what can I do?
you mean only the carplay without sound , or the music or video from android screen without sound as well ? did you choose "AUX" in OEM menu?
@@HifimaxOfficialboth android screen and CarPlay no sound. I chose AUX in the oem menu too… still no sound
you can watch this video : ruclips.net/video/1s_9pJKAMz4/видео.htmlsi=fW-aZ_-DqBNPDcdk @@botelho2771
Tried all the steps still won't work but still plays radio while it says it's playing Bluetooth music
hello everybody my quetion in my originale car bmw x3 2014 havoe no optical fiber cable,and now i did instalted the new display but have no sound but evrything its instaled good the came rare function but have sound when you use it.
You can check : if the original radio have sound or not ; also connect the AUX cable , choose AUX in original menu before using the Android screen
I have Android carplay 12 touch screen. I took the optical (green) wires out of original port and install into new port. Still no audio. Can you please advise?
Thank you
There is a video about the optical fiber movement, ruclips.net/video/8uobWgYDI1E/видео.html
You just notice two points: 1, move to crrect spot, 2) notice the direction of optical fiber cable... my videos always talk "in details" , that way, people can do it themself.
@HifimaxOfficial Thank you! I did actually misplace the optic cable. Now that I have optic wires in the correct place, I still don't have sound or any radio either. Could I have blown a fuse?
@@robpabon3608 you can watch this video. ruclips.net/video/1s_9pJKAMz4/видео.html
Now my idrive is not working. No sound. The passive door locks not working either.
@@robpabon3608 please check with your supplier, since it need to check in details (connection, settings and your software MCU version etc), that is impossible to know the reasons by review your message here.
What is it doesn’t come with optic cable
If the car without optical fiber cable , then just connect the power directly. It is also ok , a lot of car without optical fiber cable .
Thank you bro its worked
HUD not working after install. How can I fix?
HUD is OEM function , you need access to original menu to use it , if in original menu not work , you can check if the optical fiber cable movement, to check when you moved to new power cable , the optical cable direction correct or not , normal it is upside down then have this problem ,
Thank you!!!
Welcome!
Guys if I turn my volume up the sound gets a little bit worse any ideas?
Guys, I found the issue. In android car settings, remove T-Link app from „Default Navigation App”. You can’t actually de-select it, so just choose something else, I selected „photos” randomly. Now I can hear caller through car speakers using carplay
T-link ? In the default navigation apps, most of time is google maps . Why the “ T-link “ in the navigation app list ? Sorry I don’t clear, maybe your model is different to the one we selling .
pp
I connected the screen and for some reason, without the aux cable plugged in it works but I don't know how. Apple play works but there is a lot of crackling noise when playing music
Thank you!