I was just discussing this exact thing this morning and was wondering if the RC Pro could do this instead of the smart controller. I’ll test it out soon.
Goggles are connected by wire to DJI RC Pro -> to DJI Fly app. 1. What is the resolution of signal from Goggles V2? lower than 1080p? Is there a difference between RC Pro and any other devices on Android or iOS? If i connect my Goggles V2 + o3 to iPad via cable, resolution of recorded videos is 1440*808
Today we were trying to see the image in the RC PRO, with the updated app and the new gogles V2 and the O3 module, it was impossible, is there any more step that can be done
Can you use this wirelessly? I have Dji o3 air unit as well, and I want to be able to fly without wearing the goggles. Can I connect the rc controller to the goggles and use the controller with live feed?
Hello, friend. What camera mounts did you use? I put in the standard mounts and I got stripes on the left and right. Not sure what to come up with yet.
Hi friends, I have exactly the same setup with the DJI RC Pro and the FLY app updated but It doesn't work. I don't have the "FPV Live" option visible in the RC setting. Did you do something special to make it work ? Thanks a lot.
Hi @@steadiged, actually my RC PRO did a FW update to what I thought was the latest version but then it proposed me another one when I switched on my Mavic 3... So now I really have the last one and it works :) Many thanks !
I have the googles 2 and it's works only with my iPhone (dji fly 1.9). unfortunately it doesn't works on my dji rc pro with the last dji fly app update (1.9). do you know if you have to enable the developer mode and enable something ? thanks for your help
@@OverlandFamilyэто потому что она на в2 использует, там в настройках есть функция отключения осд, на гуглах 2 нельзя. Если нашел решение, отпишись плиз
I'm watching scratching my head no matter what I do I can't get live view to work on RC pro. It worked at one point and it is broken now after some firmware update. Digi view, dji fly app, air unit, caddx, 03 nothing runs. Works fine on an android still though
I tried to get a Vista and v2 goggles to connect to RC Pro and I couldn’t get anything to show up. What settings did you use? Is this using the Fly app?
@@ClarkDroneFilms I think we were using O3 air unit and v2 goggles for our test. To get it working, we had to go into the settings of RC Pro > display > turn on FPV Live switch. V2 goggles will give a clean video feed display on RC Pro with no “DJI FPV live” logo. Goggles 2 video feed to RC Pro has a watermark logo of “DJI FPV Live”. Let me know if these steps don’t work for you and I can try to assist further.
@@ultrazep thank you Mike, I'm just planning ahead at the moment. Need to buy an o3 and stick it in a quad, might be in touch here again once I've tested it. 👍
Hi there, could you tell me a bit more about the watermark logo that you get from the goggles 2? Where and how big is it shown on screen? I want to start using it for live feeds for event coverage, but having a big logo in there just makes it impossible to use for professional purposes. Thanks in advance!
How did you get the osd out? The goggles v2 displayed the osd correctly. Plugged o3 together with goggles 2 - no osd. In v2 the goggles had a separate menu item to display osd, in goggles 2 there is no such item in the menu.
Hey, thanks for this explanation ! So is the goggles connected to the DJI RC Pro via cable ?
Yes, with quality type c to type c wire
Can you use the DJI RC PRO with the o3 without goggles for viewing and controlling?
No
Hi bro, How to remove OSD?
will this work with the old air unit?
I was just discussing this exact thing this morning and was wondering if the RC Pro could do this instead of the smart controller. I’ll test it out soon.
Did you test it
Goggles are connected by wire to DJI RC Pro -> to DJI Fly app. 1. What is the resolution of signal from Goggles V2? lower than 1080p? Is there a difference between RC Pro and any other devices on Android or iOS? If i connect my Goggles V2 + o3 to iPad via cable, resolution of recorded videos is 1440*808
Good morning, can you do this with a smart controller and an O3 or CADDX view?
Today we were trying to see the image in the RC PRO, with the updated app and the new gogles V2 and the O3 module, it was impossible, is there any more step that can be done
Yes 2k and 4k in a googles 😁😁
Привет. Подскажи пожалуйста, как убрать осд на выходе hdmi. Очки G2
can do the same with de DJI mini 3 controller?
Yes
Can you use this wirelessly? I have Dji o3 air unit as well, and I want to be able to fly without wearing the goggles. Can I connect the rc controller to the goggles and use the controller with live feed?
Oh, wow, nice view, and the same idea 😂, i have f6 camera mount on my f5 frame, and it’s so perfect. Thank for vid
Smart Controller Can you do it?
Nope
Will the RC Pro work this way with Goggles 2 + Avata too?
Yes, 🖐️
Hello, friend. What camera mounts did you use? I put in the standard mounts and I got stripes on the left and right. Not sure what to come up with yet.
It fitted without any modifications
And the stripes on the left and right are not visible?
@@ivanleontev3455 in the googles,no
This is great, thanks for sharing!
does this also work with the original DJI Air Unit or caddx vista?
With final software update and googles 2/integra - YES
@@steadiged with goggles v2 also?
@@shotbyarian no
Do you know if it works with googles V2 and smartcontroller V1
Yes
Thanks
Hi friends, I have exactly the same setup with the DJI RC Pro and the FLY app updated but It doesn't work. I don't have the "FPV Live" option visible in the RC setting. Did you do something special to make it work ? Thanks a lot.
It in android settings
@@steadiged yep but I don't have this option in my updated RC Pro android setting. Don't know why... You had it easily ?
Settings, screen, FPV live toggle.
Are you Shure you have RC PRO ?
Not older smart remote or new gray DJI RC remote,?
Yep it's my updated Mavic 3 DJI RC Pro remote. And This FPV live toggle don't appear... It's driving me crazy :/
Hi @@steadiged, actually my RC PRO did a FW update to what I thought was the latest version but then it proposed me another one when I switched on my Mavic 3... So now I really have the last one and it works :)
Many thanks !
I have the googles 2 and it's works only with my iPhone (dji fly 1.9). unfortunately it doesn't works on my dji rc pro with the last dji fly app update (1.9). do you know if you have to enable the developer mode and enable something ? thanks for your help
Go to android settings, need to switch on FPV LIVE
Thanks but witch option should I enable?
@@pa7a7oz in display settings, FPV LIVE ( turn ON)
@@steadiged thanks I will try!!
@@steadiged Thanks it works
Does it work with air unit?
Greetings~Yo- this is great . see ya!. 🤩
Привет у тебя на монитор картинку выдает без осд и значка DJI ?
Да, конечно
Это как то отключается? Просто что до этого видел у всех с осд было. У тебя же rc pro ?
@@OverlandFamilyэто потому что она на в2 использует, там в настройках есть функция отключения осд, на гуглах 2 нельзя. Если нашел решение, отпишись плиз
That´s awesome Gedeon, any recommendations on a good quality usb c to usb c cable?
Baseus 100w 2m USB c USB c
Thunderbolt 3 cable suggested.
Does using the usb c port mean you cant charge at the same time?
no
Will it work with the vista air units also?
if Googles 2 yes, with v2 no
@@steadiged I have so far been unable to get th DJI RC to connect to the air units. There is no options for the air unit. Can you assist?
@@rotorblast do you have new googles 2? Have you updated air units to latest firmware?
@@rotorblast and you need to have RC PRO not DJI RC
@@steadiged correct. I have the RC Pro.
Do you know if it also works on the DJI Rc (non Pro)?
Maybe
no
How do you make it have no osd
Niiiice...But i see you have the goggle V2...With the new Goggle2 goes not?THX for Info
With Googles 2 works the same :)
@@steadiged Thought it wouldn't work because the Goggle2 doesn't have an hdmi out!?
@@Spyropg googles V2 also don't have HDMI output
@@steadigedAha😁Then the signal goes via the USB C port
@@Spyropg watch video again, on the table is DJI rc pro remote which have mini HDMI output. But from Googles to remote goes USB c to USB c wire.
o3 air unit + goggles v2 can output 1080p ?
I have try this setup with dvca on Windows PC, and the result is 1440x880, not even close to 1080p
can RC pro make video output to 1080p ?
@@DogflyFilm did you find the answer to this question?
I'm watching scratching my head no matter what I do I can't get live view to work on RC pro. It worked at one point and it is broken now after some firmware update. Digi view, dji fly app, air unit, caddx, 03 nothing runs. Works fine on an android still though
any luck?
Nope. Digiview works consistently on an android but the RCpro is frustratingly expensive trash... @@Halphbaked210
I can’t get the googles to connect to the rc pro.
Update RC PRO
What about with Vista?
With latest firmware for googles 2 and integra only, will work
@@steadiged aa penultimate release?
Why it doesnt hve osd in hdmi out?
Because DJI , and for me it is better without OSD )
Hey do you know how to disable osd ? Is it just by plugin hdmi on the radio ?
Осд не передается в hdmi?
Нет больше
@@steadiged как? поделитесь
Разобрался, надо в очках отключить передачу данных
@@FlyBugKhvа какие у тебя очки? 2 или в2?
У меня 2, есть решение?
Game changing.........
is there a how to video?
Still working??? I need it for work😭😭😭😭
Yes
Does this work with the goggles 2? Is this the dji controller for $309?
I tried to get a Vista and v2 goggles to connect to RC Pro and I couldn’t get anything to show up. What settings did you use? Is this using the Fly app?
Did not tested it yet with vista.
Hey Mike did you get this working? Vista + V2?
@@ClarkDroneFilms I think we were using O3 air unit and v2 goggles for our test. To get it working, we had to go into the settings of RC Pro > display > turn on FPV Live switch. V2 goggles will give a clean video feed display on RC Pro with no “DJI FPV live” logo. Goggles 2 video feed to RC Pro has a watermark logo of “DJI FPV Live”. Let me know if these steps don’t work for you and I can try to assist further.
@@ultrazep thank you Mike, I'm just planning ahead at the moment. Need to buy an o3 and stick it in a quad, might be in touch here again once I've tested it. 👍
Hi there, could you tell me a bit more about the watermark logo that you get from the goggles 2? Where and how big is it shown on screen? I want to start using it for live feeds for event coverage, but having a big logo in there just makes it impossible to use for professional purposes. Thanks in advance!
How did you get the osd out? The goggles v2 displayed the osd correctly. Plugged o3 together with goggles 2 - no osd. In v2 the goggles had a separate menu item to display osd, in goggles 2 there is no such item in the menu.
Read o3 online manual, there is instruction.
Tell us in detail