Barndo 27: Hanging Drywall is Finally Started
HTML-код
- Опубликовано: 14 окт 2024
- In this episode of Building a Barndominium, we finally started hanging drywall. We also ended up installing a bunch of noise suppression insulation in key walls throughout the house.
If you'd like a plan for a barndominium like this, check out my plan page. There are a few highly detailed plans so you can build with out details.
rrplans.bigcar...
Also, to support the trades and kids looking to become tradespeople, if you buy a RR hat $12 will go directly to a non for profit. Thanks in advance for helping me support the future trades
rooster.beacha...
I think everyone should work in the trades at one point during their lives. The sense of humor and work ethic that is taught is essential 👍 great work as always.
my son is 16 and if I could get him to work for these guys after high school I'd feel really good about his future
I read the entire Ryan's ruclips.net/user/postUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan's Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan's Shed Plans.
Really admire the drywall guys, they throw the drywall up soo quick, then the mudding gets done soo fast.
Never seen a person so skilled and dedicated to deliver top notch work!
Gonna be such a great family home. The peace of mind of a well built house also
I love walking by rockwool insulation before the drywall is hung. It absorbs sound so well it feels like air is being sucked out of my ears.
You’re a serial killer
Like this format of video with multiple days and events. Appreciate the explanation of why certain things are being done ie insulation.
Post to beam connector under floor for the post. You’d have to check on the sizes of them. If they don’t have the right size, you can pad out the floor joist to whatever size the connector is. Much stronger connection
I was going to add this exact comment, but checked to see if someone else got there first. +1.
Hi Kyle, it is really true that you never stop growing !!!! 🤣🤣🤣🤣🤣🤣🤣🤣🤣💯👍👍👍❤️
If your posts are long enough, I cut the to so the lvl can sit basically inside the post. Grk through post through lvl back through post. Should keep it from twisting and drywall will hide any cut that isn’t exactly perfect.
i would love to work for/with you. you are the type of person i would love to learn from, your care for you work and your attention to the smallest of details used to annoy me when i first started watching but now that ive learned more about building ive grown to love it and this channel, too bad there arent more people who work like you, especially not around where im from, most people are hacks
Wow, thank you
I now realize that my life won't be complete w/o the RR Building boy's Barndominium. Looks awesome!
Hi
When I tell you I LOVE THIS LAYOUT, I mean it!
Looked at Tons of layouts and it’s easy to fall in love with one that is way out of my budget.
But this one seems spot on
wow it's starting to really take shape... fantastic..
I love the work you do, the attention to detail along with the precision that you put into all of your jobs.
"It probably says it causes cancer in California" made me laugh out loud and I'm from Sweden. That says everything :D
It's awesome seeing someone who demands perfection in their work.
We just love watching you guys. We just got our bridge and driveway done and will be building soon. Thanks for the inspiration.
I learned so much watching these videos!
Taking notes: “Don’t wear a mask if the other trades will make fun of you”😂😂📝📝
I came to your channel via the link from Modern House Cabin =)
this seems like your longest project, of course it's all coming together super nice!
The project is looking awesome!! I love the exterior colors! We love the LP Expert Finish siding. We're using the Expert Finish Soffit and Fascia for the first time on our current project and are loving the way it looks!
it really looks awesome installed doesn't it
@@RRBuildings It really does. Night and day differnce.
High five to you both. True craftsman!
16:38 reminds me of Tucker dropping his keys in Something about Mary.
At 20:30 is an example of people who do not install it well. Some people tuck it in by the studs with their finger tips, which is doesn't the best way by crushing it. The friction of the studs is the problem. You can use a piece of sheet metal on one side and push the rock with your palm flat. Then repeat the same move on the other side.
I wanted to see the boom putting the drywall inside lol
Awesome work. They broke the mould when you were born. I would insulate everything in all of the rooms. Why be sorry because you spent soooo much and tried to save a few bucks? I would insulate that closet wall. jmo
I would build the beam out and route in straps on either side. If you make a jig for your cut out, you can also make a piece to fill the slot.
It was nice of the electrician to run those nice yellow hangers for the tin knocker to sit his pipe on...
Looking great! I see that you use a tape measure to place your nails on that corner post, guys that work with me bust my behind because I do that, so I laugh at them and say who looks better lol. I will say I found your channel when I was trying to bid a metal roof on a garage and had no clue how to but watching your channel gave me the confidence to go at it with no reservations, you guys do things on a unique level which I try to adhere too as well. Keep up the awesome content.
I don't know how easy it would be to find but they make exhaust fans for over the stove that also bring air back into the room. I had a commercial unit that did exactly that. If not it would pull so hard it would open the doors and suck all the outside air in... Great content as always 😊
Great progress Kyle! Well done buddy! 👍😁
its nice to see Canelo Alvarez finally put up the gloves and is now happily working in construction no cap
I wish you were my teacher is that you are so great
I was looking for some tips on metal trims to add a door and some windows to my post frame shop. Found your channel and am addicted now. Lots of good details but also the fun you guys have obviously doing what you love. I keep seeing an anhydrous ammonia trailer in your shots. What is that used for?
Awesome stuff Kyle! 😃👍🏻👊🏻
This channel just rocks
Why do you have a #14 wire feeding the outside GFCI being fed from a #12 wire in the room? Around here that’s a guaranteed failed inspection…..
What a fantastic project, one question, what’s your favourite, cabin in the woods or this one👍👍👍👍👍👍👍👍
Another great video guys. Greg is still the king. Looking forward to the giveaway it’s coming up soon I hope I’m in the running. Looking forward to see what the finished product looks like it looks good on Instagram.
The sound difference in the master is crazy. Even on video.
amazing! love seeing the project come together
I miss walking on the stilts. After a hip replacement doctor said to sell the stilts. You should wear a mask when doing any type of insulation. They all create a lot of particles, none of which are good for your lungs. Lets see Greg use the stilts so he can get up in the world lol. Looking good.
Looking good brotha!
Kyle, what are your thoughts about wood fiber insulation? And finally seeing you on stilts. Do you have any tricks on those? Great project!
stilts are cool...just gotta get on them and get comfortable
the connector you used to attach the post to the floor, use one of them in the ceiling, block out the ceiling to accept the fasteners for the connector. may need to jack lift the floor just a touch to get the bolt heads in the top of post or use the kind with a plate over the fasteners. trim around the post to suit, perhaps extend your blocking for the trim.
You're an excellent communicator. Here's a liitle note though: For the verb "to run" - present simple: Run / past simple: Ran / past paticiple: Run. So it's- "We have RUN." NOT- "We have RAN."
Hey Kyle. Does your truss supplier engineer the giant clear spans or do you use a structural engineer? My local truss engineer is having a hard time getting the on center spacing like you guys do. I have a client in Colorado looking to do a 60x100 shop. I looked into steel building but their lead times are horrendous. They quoted me 6 to 8 months
Excelente y muy hermoso trabajo felicidades esta quedando muy hermosa la casa saludos desde chile 🇨🇱 👊👌🏻🙏
Enjoyed the video
I would just create a tenon or two on the end of the beam and bolt it to the floor joist.
Is there going to be a fresh air exchanger put in since the house is very air tight?
14:00 Gutters? Those are downspouts. 17:23 You reminded me of this song, specifically this part: ruclips.net/video/B4g6qwBsbSE/видео.html
Not one of these videos of this build has even come up in notifications, I've had the bell etc checked for three years - pc - iOS and Android. I thought you guys stopped doing builds. I used to get our regularly, not anymore.
keep up the great work
Good morning, at 4:16 where the floor joist and the I blocking meet with the joist hanger do you shim the blocking gap 1/8" for drywall?
Is there a post frame contractors association? I’m looking for a good post frame contractor in the Kansas City area. I haven’t been able to find a contractor that specializes in post frame construction yet.
Thanks. Love all your videos.
Soooo Kyle and greg I have put in a video for the giveaway. But I need to adjust what I said earlier. So if I win the giveaway I will spilt what I get to my best friend who has his own business that deals with construction and remodeling. I just hope you all give us a chance because starting a business in this climate sucks and my best friend needs these tools more than me. But I also would like some. Let’s go greg the king of the castle.
Please get rid of those stilts ! I know your not old but I just had a ladder fall out from me. I only fell 5ft. And if could see the damage it done to my body it is a long road ahead. I broke my humorous bone completely in too, wrist & finger, 3 ribs, 3 vertebrates. I worked of ladders all my life.Now i’am age 67 . Love your videos & craftsmanship. Stay safe . Ken
Cat claws have been here for a over 100 years
Hey Kyle. Why not use the same braket, the one you used for base, for the connection between 6by6 post and lvl?
why didnt you show the electrical and plumbing work in an episode, I really like watching it
Can you do an update on your tool belt setup ?
What was the anhydrous ammonia tank sitting by the barndo for when the sheetrock arrived?
One thing I’ve always wanted to ask about US building practices. Why aren‘t the dry-wall sheets doubled up on all interior walls? That one sheet is so flimsy and is easily holed if something/someone falls against it 🤔
Fire burns up double ceiling gives 2 hr burn time
Because all of our walls everywhere are 1/2” drywall, and the amount of holes I’ve seen people make falling through them is exactly 0…
I’m sure it happens 😂 but it’s probably measurable by fingers on a hand… maybe someone is overselling you to need so many sheets for your walls
You ever used Alside Performance G8 Trim coil??
You would be correct, as a Californian even when my wife gave birth. Our children had to have labels stating they can cause cancer.
Dang right, mineral wool aint no joke, its way worse than any fiberglass insulation.
Are u guys not doing those ceilings?
I find it insane that the duct work is not sealed at any of the joints. I would fail inspection in my area but I guess that its not the same in all areas. No hate. Love the vids. My 7/old daughter and I have been binging the whole barndo series.
All duct is insulated and sealed internally
@@RRBuildings I'm referring to all the snaplock, boots, s lock and drive joints. We are required to use UL181 rated sealants on any mechanical seam. Love the videos keep up the good work!
There is going to be to much flow during a heavy downfall of rain off the top of the roof for that corner gutter not to just shoot the water like a jet over the lower roof on to the ground. That corner gutter should go straight to the ground.
LMAO
Do they uses fire rated sheet rock (drywall) in the mechanical room?
only thing i could think of is mortise and tenon that post in to the lvl but that lvl is a thick boy
🌺🌹🌴🌷🌷🌴☘🌷🌷🥀🌹🌺🌴🌼🌸🌻🌸🌻🌸🌻💮🌻🌸🌿⚘🌷🌴🌹🥀🌺🌺🌹🌴🌷🌷🌴☘🌷🌷🥀🌹🌺🌴🌼🌸🌻🌸🌻🌸🌻💮🌻🌸🌿⚘🌷🌴🌹
Kyle, what color is the versetta stone you used on this house? I want the exact same color for my house.
Did I just see 12gauge wire feeding into 14gauge wire?
I saw that too!?
i load the rock before the windows go in
What kind of trim are you using around the windows?
What a beautifully done ruclips.net/user/postUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU ! The instructions and the photographs are brilliant. It is thorough and genuinely informative. Ryan got another winner! No one does it better!
Hey, Kyle. Metabo or Milwaukee framing nailer? 21 or 34 degree if code allows for either?
Come on, you don´t mean that their building codes regulate how the nails are stored in the gun before use?
16:44 kyle you do sumo deadlifts?
🏴👍
So many split seams over doors…guaranteed cracks over the doors. Ouch
LMAO
@@daveklein2826 not sure why you’re laughing. Worked in home construction for 15 years. Happens 90% of the time because of settling
@@briarhokie4156 laughing at all the professionals that come out for these videos
How come fiberglass in the garage area and not mineral wool?
Probably cost
How come the electrician mixed wire sizes for the exterior gfi? 20amp feed and 15 amp wire to gfi?
Yeah I saw that. I hope he’s putting a 15 amp breaker or that’s a white 12/2
@@oscarjr2679 the 15amp bkr is more likely. I haven't seen white 12/2 produced is many years. I hope he's not going with a tap rule. The white wire definitely looked like 14/2 as it was thinner than the yellow jacket 12/2
I want this floor plan
Doorbell wired?
How would you go about vapor barrier-ing and insulating an existing poll barn?
Barn-doe is gettin' thar
Man didn’t know canelo Álvarez Did construction
Good afternoon, excuse my ignorance, but I would like to know how much it would cost for a 25x35 shop with a height of 10, two garage doors 10 wide and a normal door and two 3x4 windows.
seems insulation is just for sound, seems like a waste of money when the envelope is all insulated. I guess its better than no insulation if no one wants to hear anyone else.
If you have to cut that mineral wool I'd recommend a mask. Those fiber from that crap made me cough up a lung. Nasty
Mineral wool most definitely causes cancer, my man.
Everyone knows you can't get lung cancer in Texas, though. ;) Lol.
what in the name code?!? you cant mix white and yellow wire! WTF kind of inspectors do you have there that they dont call that out instantly?
No shots of the board going up??? Come on man, everybody wants to see them shoot it in!
Don't eat any bananas around the guy wearing stilts.
You take meticulous detail on just about everything you do which is awesome and then when you go to put the downspout on you don't use a downspout outlet. SMH. 🧐
.
V