I am in this train but my HS aus is red on my monitor where yours is blue and the red box around the “gear” indicator won’t turn back to white and it won’t give me a directional arrow either, just the X… please help
What happened just before that? It sounds like you might have had an emergency braking situation. Either one of the safety systems has stopped you or perhaps you were going too fast?
I was messing around in the switch box with the battery and it hard shut everything off. I've tried to find a training that helps set this train up from scratch and every training scenario has it already on. After messing with the battery and the train is hard off, how does one reset it?
@@nicholasmcclary4119 I don't know for the ice-t, see if you can switch on battery power then get the pantograph up, once that is up close the main circuit breaker and see how you go
@@trainsimulatordriver i figured it out. You have to switch the battery to "on" but continue to hold it there for a few seconds until the system registers it
@@nicholasmcclary4119 I was looking for exactly this. I switched off my battery and switch it on again. my train went completely off. thanks for the advise.
Hi, it is my first time to play this game, found it interesting. ButI found that it is quite difficult to know every function of the train. Like at around 20:17, you said "......the 85 light is flashing so we can't go above 45", may I know what is the meaning of that 85 light? I always see it flashing when I have a ride. Since English is not my first language , and the in game training is not so clear, so the learning curve is steep for me. I don't mind to read a handbook to learn how to play, but I'm still finding on the internet.
@@billucheung explaining the flashing lights and the signalling behind it is an in-depth topic. 8 can link you a video if you want it, be aware it's long and complex!
@@trainsimulatordriver thanks btw I have freeze issue for this route (on timetable mode)which limits my gameplay. Whenever I try to spawn a train later add my destination and try to add on the way point, it will freeze on the live map and for sure crash. I tried it with all types of German Train and it can also happen when I tried on the default timetable train. Btw I play on my PS5 and download the PS5 version. Already issued them a ticket, hope that they can fix this issue on Day 1 patch which is 17 ofc
@@azim6164 no chance of new changes but I imagine it would get addressed quickly, could I please confirm you're using free roam in the timetable on Frankfurt. What station are you trying to spawn a new train at. What train and what time and what platform of what station?
I'm playing with this train in Training Center and there is one thing I can't get working. How do you uncouple these trains? I have press the uncouple button in both front and end cab and it just won't uncouple. What switch am I missing?
You are not missing a switch. The uncouple button releases the lock and disconnects the air and electrical connections. After doing that you will need to get out (or use the external camera) and click on the coupler itself to uncouple. Note with this train you can only uncouple full sets not individual cars.
Best train sim driving vid ive seen yet!!
thanks hope it was useful
I am in this train but my HS aus is red on my monitor where yours is blue and the red box around the “gear” indicator won’t turn back to white and it won’t give me a directional arrow either, just the X… please help
What happened just before that? It sounds like you might have had an emergency braking situation. Either one of the safety systems has stopped you or perhaps you were going too fast?
It's also possible your doors are open. Have a look
I was messing around in the switch box with the battery and it hard shut everything off. I've tried to find a training that helps set this train up from scratch and every training scenario has it already on. After messing with the battery and the train is hard off, how does one reset it?
@@nicholasmcclary4119 I don't know for the ice-t, see if you can switch on battery power then get the pantograph up, once that is up close the main circuit breaker and see how you go
@@trainsimulatordriver i figured it out. You have to switch the battery to "on" but continue to hold it there for a few seconds until the system registers it
@@nicholasmcclary4119 I was looking for exactly this. I switched off my battery and switch it on again. my train went completely off. thanks for the advise.
Hi, it is my first time to play this game, found it interesting. ButI found that it is quite difficult to know every function of the train. Like at around 20:17, you said "......the 85 light is flashing so we can't go above 45", may I know what is the meaning of that 85 light? I always see it flashing when I have a ride.
Since English is not my first language , and the in game training is not so clear, so the learning curve is steep for me. I don't mind to read a handbook to learn how to play, but I'm still finding on the internet.
@@billucheung explaining the flashing lights and the signalling behind it is an in-depth topic. 8 can link you a video if you want it, be aware it's long and complex!
Hi, so ice-t can't change the passenger route information like previous ice3?
@@azim6164 no, most of the trains are automated now and pick it up from the timetable automatically
@@trainsimulatordriver yeah realised that only new train in tsw5. Hope that they return that feature to the new train.
@@azim6164 I'll put that feedback in for you
@@trainsimulatordriver thanks btw I have freeze issue for this route (on timetable mode)which limits my gameplay. Whenever I try to spawn a train later add my destination and try to add on the way point, it will freeze on the live map and for sure crash. I tried it with all types of German Train and it can also happen when I tried on the default timetable train. Btw I play on my PS5 and download the PS5 version. Already issued them a ticket, hope that they can fix this issue on Day 1 patch which is 17 ofc
@@azim6164 no chance of new changes but I imagine it would get addressed quickly, could I please confirm you're using free roam in the timetable on Frankfurt. What station are you trying to spawn a new train at. What train and what time and what platform of what station?
how do i open the spedomiter
@@Swedish_protogengaming I'm not sure what you mean by open... Are you trying to interact on the dash or do you want to change the in screen HUD?
I'm playing with this train in Training Center and there is one thing I can't get working. How do you uncouple these trains? I have press the uncouple button in both front and end cab and it just won't uncouple. What switch am I missing?
You are not missing a switch. The uncouple button releases the lock and disconnects the air and electrical connections. After doing that you will need to get out (or use the external camera) and click on the coupler itself to uncouple. Note with this train you can only uncouple full sets not individual cars.