THANK YOU FOR THIS VIDEO!!!!! I have been trying to figure this out for days and this is the only video that actually helped! Every other video seems to be outdated! This has opened up so much for my job! Thanks again! Subscribed
Hi - 2.5 years later! (but there is a reason for posting here). . OK - going back 2.5 years, I followed your excellent video and killed off NFZs and opened up the height restriction, and ended up with 01.04.0100 working absolutely fine. So - a belated thanks for the assistance. So - I posted here because that is exactly where I got to. . The important thing in 01.04.0100 was that it gave me (the still relatively new at that time) panorama functions ... the only reason I rolled forward to that version at the time - but they've never worked as well as I've seen some others create on their MPs. I'm guessing panoramas were still "in development" by DJI at that time and what I should have done was keep an eye out for the later .0200, .0300, .0400 and .0500 in case they improved things. So I guess I can now just repeat exactly what I did to roll forward to .0100, but with the .0500 bin to update? Or do I need to do the .0200, .0300, .0400 first? . Whilst scribbling, the only reason I became interested in updating at all was because of something that happened. Suddenly I lost all VPS sensing - and hence auto-land (at a sensible speed! LOL!), etc. Luckily, re-flashing the .0100 firmware fixed this and now it's back to normal. Thought I'd just mention this in case this situation hadn't been heard of before. . Thanks again! 👍
Well, this is about the best, most complete, well explained video out there on DJI modding. This goes at a more relaxed pace that one or two others, which helps you pick up very important points, that are not things you might figure out on your own, on the fly. I'm talking about what to do when the downloaded firmware doesn't appear for the DUMLdore step (the asterisk in the search box solves it), the need to refresh the new firmware more than once - sometimes way more than once. Amazing! When you get all the little fine points, the tweaks make the Mavic Pro at least, a real joy to fly again. Fast, high, nimble, without having to tweak it each time you fly. I really hope that Digdat0's restaurant is successful. Not sure where it is, but I'd definitely come in for dinner and say hi if I knew it were here in the Bay Area. But hope that he's not so frazzled that he can't keep taking care of us kinda-newbies. Thanks, Steve!
To summarise in one word 'Amazing', i'm left speechless with your knowledge. There is one mod, which you have probably been asked for a million times, that is how to get the extra power that FCC settings give over those of CE. I have had a very careful look in the settings but cannot find anything which might do the trick. I think I would be speaking for thousands of flyers stuck with the CE power, that hack would be more useful that the NFZ or height hacks. Any assistance/advice greatly received. Thanks in advance and Happy Christmas. Kind regards. Gary
check this out: I've used the mod in this video to get my mavic unlocked, and then this video: ruclips.net/video/WQsf9dxG2QQ/видео.html to get FCC - I'm in South Africa which is a CE country.
Even if you went through this. Watch the video from 16 mins onwards. He gives good advice for all flyer's. Anyways there was a common problem with the newer versions of setting the speed to 50, and resets back to 10.
Hi, just followed all these steps for my DJI Spark, works awesome! However, the old Dumldore does not work after 2019 & the new one DOES NOT have the custom firmware option. Do you know of a solution as I would like the features of the latest firmware while retaining the tweaked parameters. cheers!
Digdat0, thank you sooo much for your effort and perfectly working instructions. Two questions : 1. How can I support you? Is there any team around you? 2. Why does precise auto landing not work? Any idea how to fix this? It's a cool feature when you are going up and down behind the house w/o being there. Thanks again for your great work!
Hey Tom - i'm a one man band here, but the OG's and the community are all the support we need. Keep contributing, try new things and SHARE information! Thats what this is all about, helping folks in the community and sharing as much as we can. As for precision landing, I think there is a required firmware version to get it to work .. many guys who i talk to who are on on 1.03.0900 (no nfz, but yes to height removal) say that precision landing works on that version. TBH i dont use that feature so i havent tested that out, but thats supposed to work.
Once again, another great Video. I have been grateful for your instructions on changing Parameters and restrictions for 6 months, and your knowledge has helped me get incredible speeds, distance and manoeuvrability on my Mavic Pro and Spark. However I recently purchased a Mavic Air and the Parameter listings/names are different to the M Pro and Spark. Do you have a list of equivalent Parameter names and their recommended settings for the M Air? Any help from the guru would be much appreciated.
Thanks so much for this. I was really bummed when they changed the GEO maps and I was in a NFZ. I just like to fly in my yard around my pond at low altitude...Now I can. I had some ups and downs following this with some bumps along the way but I kept at it and got it all done Ed
Ok, so I finally got this working... I think. I have 1 question, when the guide says to change to Non-DJI battery because if you hit 1600 it will auto-land, does that mean 1600 feet or 1600 meters? This is important because I do not plan on going above 1600 meters, but I do plan on going above 1600 feet (500 meters). I would rather not change the setting to non-dji battery if I do not need to. Thanks for the help!
Hallo from Germany ! Congratulations Steve for your nice Work ! I have already mod my Mavic Pro , but don‘t want to work properly . The RC is connecting with the drone, but on DJI Go 4 ist disconnectide and I can‘t See no Parameters in Menü. I Must to change the Firmware from RC or use another (older) Version for DJI Go 4 App ?! How can I do this ? Thank you very much for help !
Thanks steve, I have succeeded. but why sometimes there is a "no fly zone" notification on the remote control? and the aircraft can not fly. but suddenly the notice did not show up again. sometimes I have to turn off and turn on the aircraft several times so the NFZ notifications will not show up again.
10/10 for this video, thanks alot. Question - I followed the video exactly. No my Mavic Pro no longer has the count-down timer on battery time. Therefore it doesn't recognise when it should come home due to distance etc. I almost lost her when it landed in the middle of nowhere. Suggestions, please?
Hello. I always look at you with great interest. Using Dji Assitant is there a way to avoid that due to the outside temperature (4-5 °), the Mavic 1 signals me "low battery" and try to land? Even if the warning comes out, ok, just do not land autonomously. Provided that it does not come down anyway. Thank you
Hello, i downgraded with nld software to. 0700 firmware on my mavic. Had some esc problems and solid red indicatorlight. Removed height limit in nld softwarr and also made all the settings in the parameters on dji assistent like you did. Then i removed the module 305 and 306 on my finishing firmware. 300 and installed the 0.300 firmware. Everything works now. Height limit is removed but can i still modd the parameters in the dji assistent?
Very informative video! I would like to do this mod, but there is was an update error when moving to .4 firm ware is 1.03 on Mavic and 1.04.03 on RC. Can I just update both at the same time through DJI assistant? or Can I Just Follow This Video?? Thanks
Hi digdat0 - I love your tutorials and would like to mod my AIR or at least remove the NFZ and if possible turn it into FCC mode. Do you have any hits on how to do this? Also if the RC need to be flashed or modded too? With the AIR there isn't many versions to choose from so which one should I choose to enable changes? When I use the DJI assistance 2 (V.1.1.2) I can't do any parameter changes with the present version in AIR but if I flash it with one from DDD will the parameters show up?
Great video just 1 question.....I have successfully downgraded then re-flashed with the latest firmware on Dumbledore on my Mavic pro & my friends Mavic, Everything works just fine apart from the obstacle avoidance doesn't seem to be working on both drone's And when you click on show radar on the screen, nothing comes on. Do you have any idea why..... thanks alot
Well done! However I would like to learn more about each parameter effect. I also like the mod I found on my P4P to remove the REV REV when motors start up, handy when it's windy, preventing flips/tips during REV REV.
you should checkout the dji modding lounge,thats what that place is for! its a balance of what parameter to change vs what they do .. facebook.com/groups/DJIModdingLounge/
I have a mavic pro platinum on 04.0500 I was able to get it down to 04.0000 but I can't go any lower. In order to get to .0000 I had to do each from .0300 then .0100. I still can't get it down to 03.0700 I'm stuck at 04.000? Any suggestions?
Awesome instructional video, as always. Question: I have already downgraded and modded,from previous instructional video all works well. I still get "IN NFZ" on rc, also get "DO NOT FLY" in app. Will this new process remove those warnings? They are just annoying.
the 'in nfz' i think is a bug or a byproduct of the modding process .. not sure how to get rid, on mine it shows for 5 seconds then is gone and never comes up again. As for the do not fly in app, if you remove the nfz restriction yeah it should be fine and that goes away.
hello I have mavic platinum firmware 1.04.0300 i put superpatcher to enable FCC but I would like to modify some parameters in dji 2 ( have downland of your link) I changed file main.js but when i am going to change any parameters the one I have before come back. I do not know what problem is. thanks
As a new guy firstly great vid very helpful. Question how you you know which firmware to select I have a Spark and an Air you chose one with the last number 300 why not the latest?
Hi digdato, Enjoy your Video's Was just wondering if you have a Spark and Can Show a Video on How To Do It. Or Should I Downgrade to the .300 fw then firmware with 701 Custom fw? Thanks
Some info for those who need to add an internal SD card - My Mavic Pro was built in mid-october, instead of glue in front of the sd card slot they used a very thin and runny type of sealant, it almost looks like thin bathtub caulk. It doesn't peel off as a sheet it comes off in tiny little chunks. I started with a tiny flathead and finished with a sewing needle and take your time, you can do some damage if you're not careful, be sure you're not scraping the board or connections from the chip next to the sd slot. You just have to clean it up enough to lift the latch, then you slide the sd card into the little channels on the latch and lock it back down, you'll feel it snap in. My latch didn't come all the way off it only raised up to about 60 degrees but that was enough to slide the card in those little channels on the edges. I used an 8gb sandisk ultra class10 uhs1 and had formatted it with the mavic beforehand via go4, worked out great. I did a manual rollback defeat after that because dumldore 3.0 was not having any luck in the automated fashion. After a manual rollback defeat I double-flashed the AC to .0700 with dumldore and then the RC to .0400 to remove any messages from it. Note: on .0400 on a previous december 2017 build mavic and I had gimbal issues so I stick to .0700 it does the trick. - Hope this info helped someone!
Hi, thanks for the great video. I have done everything in the video and everything was ok, but when I go to the DJI go 4 app the altitude still the same 500m the maximum. I wonder why it's not change to the 10000 as I changed it on assistant 2 ? Is there any specific things i have to do? Please help me. Thanks in advance 😀
Really Really good video man! Thank you so so much for letting me and everyone else fly once again! 🙏🥑 For any roadblocks, check the comments and follow the site details if needed. Good luck!
Thanks digdat, your tutorial was very useful. I tried a first time with Dji Go 4.1.22 (not Mod.) and it did not take off in NFZ. I repeated the procedure by reinstalling the 1.03.0700 and then the 1.04.0100, with a Djigo App 4.1.22.Mod (No NFZ) and it worked. On the RC it signals me "in NFZ", but I took all the sat., it is "Ready to fly". I would like to know if I can update to 1.04.0300 (I found a Mod without 305 306 and 905) and keeps me the possibility to fly in NFZ or leave the 4.01? ...Thank you!
Dear Steve, Sorry for my english, i writing from Italy, can you help me what Mavic Pro paraneter i have to modify and how, for switch off with Dji Assistant THE POSTERIOR BLACK SQUARE BIG LED on back of Drone?
I am running DJI Assistant 2 1.1.2.573 on my Mavic Pro. The aircraft and RC firmware are both version 01.03.0400. However, I am unable to locate "g_config_flying_limit_height_limit_enabled" when changing the flight parameters. I would really like to remove the altitude restrictions of my Mavic. Any suggestions or input would be greatly appreciated.
Also, when I look at the bottom where it says the flashware update progress. It says nothing about the anti-rollback and the 2 Stages. I'm not sure what's happening. I really need hellp. It just keeps saying reflashing and then it finishes. But then the firmware never downgraded???
in your program dji asistand 2 update it to firmware 600 since you have it in that firmware then use the dumldor and load the firmware 300 and voila ami the same thing happened to me it would not let me but so I try it I think it will work
@@budokaiboy hi Gregory . I have a few questions maybe u can help. I had the same problem. I also resolved by doing what u did and now am on 1.03.0700. I got as far as entering the new parameters as the video instructed. However when I power on the drone controller still reads no fly zone. We're u able to get past this? Also did u have to do the same with the controller? ANY HELP would be greatly appreciated.
I just rolled back from 01.04.0300 to 01.03.0700 and wondering if I need to roll the RC back also? What about the Go App? Also, I have DJI googles, do they need attention also?
Hi Brett excellent explanation, I'm interested. I have a question, if my mavic pro has firmware 1.04.0500, can I use your program? I'm from Guatemala. Regards
Nice and detailed tutorial, digdat, when would this approach be possible for mavic air? I've checked out your website and there said mavic air does't support, is it going to be an unsupported model forever or just for this time of period? Genuinely appreciate for you reply :)
Hi...this is great fun. I changed SPARK g_config_fw_cfg_max_speed from 10 to 20 when flying telemetry with obstacle avoidance disabled (not enabled) read 13.X, which is essentially the same as factory setting. The video I reviewed afterward seemed faster. Any insight.? Regarding YAW in normal mode (GPS mode?), which matters more yaw_sensitive_gain or g_config_hotpoint_max_yaw_rate or something else? Will changing value g_config_mode_sport_cfg_tors_gyro_range eliminate the annoying FPV default gimbal setting while in Sport mode? please reply thanks
This is an incredibly helpful document, and all the steps worked for me. But I still must be doing something wrong. DJI Go tells me I have to have a ceiling of 20-500m. Do I use a special version of DJI Go? Or something other than DJI Go?
Congratulations on the video. I did exactly what you said and everything was perfect. I just want some information. Is it possible to change the frequency of radio transmission to FCC because I live in Brazil and I know that the frequency of the USA is greater its reach?
Hi Many thanks for the video. I've downloaded and tried the recommended fix but unfortunately still got the error message when flashing the firmware. is there anything else I can try. I've been told the RC may be bricked.
Hi I have problem with paramter for starting motors in invert fly. I am specifically speaking about parameter: "g_cfg_debug_motor_no_start_motor_check" after I will set it on "1" after mavic reboot it changes to "0". Any idea what is a cause and how to fix it ???
i deleted the nfz file in the latest firmware with a parsing tool because adb was not working for me finding the nfz file i even managed to change the nfz version info name to my company name also firmware version nae in case my drone gets stolen i learn a lot from you guys thanks and yes there is no nfz without adb tools i am going to borrow and test another craft and see if can bake it in without root (P4Pro) here
I have a platinum to be delivered soon. With the SD card for the mods you mean the regular SD to simply insert in the side or do mean that I'd have to unscrew the whole drone? Really helpful video, thank you!
Tgat's fine to downgrade to 01.04.0300 taking all advatages, however how to handle flight data issues when New ones never to appear due to internal sd cars overloaded? Next fw 01.04.0400 has FIXED that. Or am i wrong
Is there a way to change the battery parameters so that I can make my mavic 2 continue to fly until battery cell level gets down to 2.5v? Im currently working on a battery mod using 18650cells. These cells can be discharged down to 2.5v per cell.
Hello, good night, I ask you. why and why do you change the battery. I made this change and in the app dji go 4 see. 4.2.16 I do not see the telemetry thank you
make sure you update your mavic to newest update and than use the dumldore v3.12 new beta version same link as in video. So new beta plus new update will solve any issue with flashing firmware thanks as well @digdat0 awesome work.
Ive got this working but I can't enter sport mode now. It just says intelligent flight modes have not been enabled and tells me to turn it on in main controller settings.. I can't find any setting. What's weird is all the intelligent flights modes do work
Hi, thanks for the video. Is there a way of making the drone tilt more in Atti mode. I can that your video shows GPS + and Sport + but is Atti + possible?
6 лет назад
Thank you for your work, 2 questions for courtesy 1: all these mods can also be done on Spark? 2: the controller with which firmware version? we always talk about updating the drone but we never talk about the controller, thanks again friend.
Yes, on the spark rollback to .300 then use modded .701 firmware for best results. I don't talk about the RC, cause I always leave it as is. Usually there is zero reason to change the RC version .. it just complicates things, so i avoid it :)
6 лет назад
digdat0 Thanks friend, you're a myth! everything is clear to me.
amigo espectacular tu video hice paso a paso todo lo que dijiste y pude.una vez termine fui a probar el Dron y Efectivamente quedo mucho mas potente lo subi solo 1100 metros no mas por que me dio miedo..pero lo que no me gusto es que perdí mis sensores de colisión frontales los tengo activados pero ya no funcionan. tambien perdi estabilidad,es decir el dron ya no es tan estable como antes tambien note que se chupa la batería en un momentito ahora solo vuelo 10 minutos como máximo y por ultimo lo mas preocupante es que en 2 ocasiones cuando dejaba de volar y prendia todo de nuevo el control remoto no se enlaza con el dron y para que se enlace me toco conectarme a internet actualizar al mismo 01.04.0100 y ahy si se conecta asi que pues inquietante lo que me sucede..si de pronto me puedes ayudar y me dices que hice mal o si a ti te pasa lo mismo o que debo hacer te lo agradeceria.muchas gracias y sos un duro
Hi. If setting the battery setting to non-dji one, is the intelligent return to home (I Dont remember the right expression concerning the auto RTH depending on the battery level vs distance) still working ? Thanks and many thanks for all you do
Thank you Steve! I was wandering: is it possible on a newer mavic pro without installing the SD card to downgrade to 1.03.700 make the nfz, top altitude mods and than upgrade to a "custom firmware" that doesnt need an sd card? Are the mods staying? Thanks!!!
Hi Steve just inserted the SD card! Still confused. . are the two NFZ mods (..config_airport_limit_cfg..) enough do get rid of NFZ or you still have to root it and delete the 905 module?? Thanks!!!
I have a newer version of mavic pro. So i get "sd card error" when i rollback to 3.700. I need to change my internal sd card. Is there any guide for changing internal sd card? Not for teardown. Example: do i need to load any files to my new internal sd card or am i need to insert an empty sd card?
Just not clear on doing this mod, so if I do this on my Platinum, remove the NFZ so it'll be like a Autel EVO, then I'll be able to update to current firmware & get the new DJI flight modes?
yeah the -6 was a typo in the last one, the comments made a note that it should be -8. -8 is very safe and is what i recommend to all people. flyflydrones.com/pages/custom-flight-parameters
Is this roll-back only necessary if you want to mod NFZ and the height limit? I just want to edit the sport+ mode on my Mavic Pro (produced may 2018). Can I do that without opening my bird up and fixing the SD-card
hi Steve, already added a com/question on your former video, but now, as I followed your steps, the ancient version of Assistant2 does not recognize my devices when plugged... Funny, isn't it? I had to reinstall the latest Assistant to use them. Will this rollback still be accessible?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
WOW - found your channel today, watched your video and it was EXCELLENT. Awesome tutorial for us newbies. A HUGE thank you! Much success!
Have you tried it?
THANK YOU FOR THIS VIDEO!!!!! I have been trying to figure this out for days and this is the only video that actually helped! Every other video seems to be outdated! This has opened up so much for my job! Thanks again! Subscribed
it worked on your ?????
@@mraneantisseur7554 yes it worked on my mavic pro
Hi - 2.5 years later! (but there is a reason for posting here).
.
OK - going back 2.5 years, I followed your excellent video and killed off NFZs and opened up the height restriction, and ended up with 01.04.0100 working absolutely fine.
So - a belated thanks for the assistance.
So - I posted here because that is exactly where I got to.
.
The important thing in 01.04.0100 was that it gave me (the still relatively new at that time) panorama functions ... the only reason I rolled forward to that version at the time - but they've never worked as well as I've seen some others create on their MPs. I'm guessing panoramas were still "in development" by DJI at that time and what I should have done was keep an eye out for the later .0200, .0300, .0400 and .0500 in case they improved things.
So I guess I can now just repeat exactly what I did to roll forward to .0100, but with the .0500 bin to update? Or do I need to do the .0200, .0300, .0400 first?
.
Whilst scribbling, the only reason I became interested in updating at all was because of something that happened.
Suddenly I lost all VPS sensing - and hence auto-land (at a sensible speed! LOL!), etc.
Luckily, re-flashing the .0100 firmware fixed this and now it's back to normal.
Thought I'd just mention this in case this situation hadn't been heard of before.
.
Thanks again! 👍
I did the first video you did and it worked on my mavic I hit 42 miles per hour and it appeared everything worked
Thank you. Great info
Well, this is about the best, most complete, well explained video out there on DJI modding. This goes at a more relaxed pace that one or two others, which helps you pick up very important points, that are not things you might figure out on your own, on the fly. I'm talking about what to do when the downloaded firmware doesn't appear for the DUMLdore step (the asterisk in the search box solves it), the need to refresh the new firmware more than once - sometimes way more than once. Amazing! When you get all the little fine points, the tweaks make the Mavic Pro at least, a real joy to fly again. Fast, high, nimble, without having to tweak it each time you fly.
I really hope that Digdat0's restaurant is successful. Not sure where it is, but I'd definitely come in for dinner and say hi if I knew it were here in the Bay Area. But hope that he's not so frazzled that he can't keep taking care of us kinda-newbies. Thanks, Steve!
To summarise in one word 'Amazing', i'm left speechless with your knowledge.
There is one mod, which you have probably been asked for a million times, that is how to get the extra power that FCC settings give over those of CE. I have had a very careful look in the settings but cannot find anything which might do the trick. I think I would be speaking for thousands of flyers stuck with the CE power, that hack would be more useful that the NFZ or height hacks.
Any assistance/advice greatly received.
Thanks in advance and Happy Christmas.
Kind regards. Gary
check this out: I've used the mod in this video to get my mavic unlocked, and then this video: ruclips.net/video/WQsf9dxG2QQ/видео.html to get FCC - I'm in South Africa which is a CE country.
Even if you went through this. Watch the video from 16 mins onwards. He gives good advice for all flyer's. Anyways there was a common problem with the newer versions of setting the speed to 50, and resets back to 10.
Clearer than you could not do. Thanks Steve
Thanks man. Great video. Best one yet. But then again I think that about all your great vids.TY. TY
Thx Steve as always....I don’t personally benefit from this video, but I watch all your new videos regardless. 👍🏻🤘🏻
Simply the best tutorial on the web. props!
Thanks bro, flashing .0300 twice made it work
Appreciate it
Thank you for the work you do for the community. Another excellent video!
thx, quad!
This guy is the best!!! Highly recommended
cheers man!
Wow!!!.. done here!!, my mavic is a super mavic now!. Awesome work digdat0.
The best tutorials as always, great work! Many thanks.
cheers Mark.
Awesome Video, like always. Thanks.
Hi, just followed all these steps for my DJI Spark, works awesome! However, the old Dumldore does not work after 2019 & the new one DOES NOT have the custom firmware option. Do you know of a solution as I would like the features of the latest firmware while retaining the tweaked parameters. cheers!
Digdat0, thank you sooo much for your effort and perfectly working instructions.
Two questions :
1. How can I support you? Is there any team around you?
2. Why does precise auto landing not work? Any idea how to fix this? It's a cool feature when you are going up and down behind the house w/o being there.
Thanks again for your great work!
Hey Tom - i'm a one man band here, but the OG's and the community are all the support we need. Keep contributing, try new things and SHARE information! Thats what this is all about, helping folks in the community and sharing as much as we can. As for precision landing, I think there is a required firmware version to get it to work .. many guys who i talk to who are on on 1.03.0900 (no nfz, but yes to height removal) say that precision landing works on that version. TBH i dont use that feature so i havent tested that out, but thats supposed to work.
Once again, another great Video. I have been grateful for your instructions on changing Parameters and restrictions for 6 months, and your knowledge has helped me get incredible speeds, distance and manoeuvrability on my Mavic Pro and Spark. However I recently purchased a Mavic Air and the Parameter listings/names are different to the M Pro and Spark. Do you have a list of equivalent Parameter names and their recommended settings for the M Air? Any help from the guru would be much appreciated.
Great job on this and all your other vids, THANK YOU..
The DankDroneDownloader Custom Rollback Firmware isn't an available option anymore. Is there another place to find it?
Sir, very good. Very articulate.
excellent, as usual sir.
Thanks so much for this. I was really bummed when they changed the GEO maps and I was in a NFZ. I just like to fly in my yard around my pond at low altitude...Now I can. I had some ups and downs following this with some bumps along the way but I kept at it and got it all done
Ed
Wonderful Job as always!!! 😎🤙 Everything worked as easily explain !! Keep up the Good Work !!!
Steve thanks for another great video.
Ok, so I finally got this working... I think. I have 1 question, when the guide says to change to Non-DJI battery because if you hit 1600 it will auto-land, does that mean 1600 feet or 1600 meters? This is important because I do not plan on going above 1600 meters, but I do plan on going above 1600 feet (500 meters). I would rather not change the setting to non-dji battery if I do not need to. Thanks for the help!
Hallo from Germany !
Congratulations Steve for your nice Work !
I have already mod my Mavic Pro , but don‘t want to work properly .
The RC is connecting with the drone, but on DJI Go 4 ist disconnectide and I can‘t See no Parameters in Menü.
I Must to change the Firmware from RC or use another (older) Version for DJI Go 4 App ?!
How can I do this ?
Thank you very much for help !
Thanks steve, I have succeeded. but why sometimes there is a "no fly zone" notification on the remote control? and the aircraft can not fly. but suddenly the notice did not show up again. sometimes I have to turn off and turn on the aircraft several times so the NFZ notifications will not show up again.
thats usually because your below 6 bars on gps, its kinda normal post modding, just wait for gps signal and it goes away.
10/10 for this video, thanks alot. Question - I followed the video exactly. No my Mavic Pro no longer has the count-down timer on battery time. Therefore it doesn't recognise when it should come home due to distance etc. I almost lost her when it landed in the middle of nowhere. Suggestions, please?
Excellent tutorial !!!! great job!
Hello. I always look at you with great interest. Using Dji Assitant is there a way to avoid that due to the outside temperature (4-5 °), the Mavic 1 signals me "low battery" and try to land? Even if the warning comes out, ok, just do not land autonomously. Provided that it does not come down anyway. Thank you
Hello, i downgraded with nld software to. 0700 firmware on my mavic. Had some esc problems and solid red indicatorlight. Removed height limit in nld softwarr and also made all the settings in the parameters on dji assistent like you did.
Then i removed the module 305 and 306 on my finishing firmware. 300 and installed the 0.300 firmware. Everything works now. Height limit is removed but can i still modd the parameters in the dji assistent?
You sir, are the man ! Finally worked
Thanks for share Steve!!! very useful !!
Nice tutorial. Thanks for this!
Thanks a Bunch to You. I have followed your Instructions that helped me to downgrade and now I can fly my Mavic Pro without limits.
Excellently SUPERB!!! Thank you for this HIGHLY detailed step by step MOD!!!! But, where to get the custom rolled firmware?!?!
dank downloader, its linked in the description
You are awesome, thank you for this great video!
hello i have version 2 of dankdrone downloader i don't have the tab
custom rolled firmware
Very informative video! I would like to do this mod, but there is was an update error when moving to .4 firm ware is 1.03 on Mavic and 1.04.03 on RC. Can I just update both at the same time through DJI assistant? or Can I Just Follow This Video?? Thanks
Hi digdat0 - I love your tutorials and would like to mod my AIR or at least remove the NFZ and if possible turn it into FCC mode.
Do you have any hits on how to do this? Also if the RC need to be flashed or modded too? With the AIR there isn't many versions to choose from so which one should I choose to enable changes?
When I use the DJI assistance 2 (V.1.1.2) I can't do any parameter changes with the present version in AIR but if I flash it with one from DDD will the parameters show up?
Lars Tørnqvist Did you get this to work?
Great video just 1 question.....I have successfully downgraded then re-flashed with the latest firmware on Dumbledore on my Mavic pro & my friends Mavic,
Everything works just fine apart from the obstacle avoidance doesn't seem to be working on both drone's
And when you click on show radar on the screen, nothing comes on.
Do you have any idea why..... thanks alot
With non DJI battery set, does the cooling fan still operate? The temp probe is in the battery!
Well done! However I would like to learn more about each parameter effect. I also like the mod I found on my P4P to remove the REV REV when motors start up, handy when it's windy, preventing flips/tips during REV REV.
you should checkout the dji modding lounge,thats what that place is for! its a balance of what parameter to change vs what they do .. facebook.com/groups/DJIModdingLounge/
Tom Spurlock Would love to know how to do this. I have had tge Phantom flip a few times because of it.
I have a mavic pro platinum on 04.0500 I was able to get it down to 04.0000 but I can't go any lower. In order to get to .0000 I had to do each from .0300 then .0100. I still can't get it down to 03.0700 I'm stuck at 04.000? Any suggestions?
Steve, at 11:48 on the video I'm only seeing "main" not main.js. Click on it and it has a syntax error code 800A03EA.
Awesome instructional video, as always.
Question: I have already downgraded and modded,from previous instructional video all works well. I still get "IN NFZ" on rc, also get "DO NOT FLY" in app.
Will this new process remove those warnings? They are just annoying.
the 'in nfz' i think is a bug or a byproduct of the modding process .. not sure how to get rid, on mine it shows for 5 seconds then is gone and never comes up again. As for the do not fly in app, if you remove the nfz restriction yeah it should be fine and that goes away.
hello I have mavic platinum firmware 1.04.0300 i put superpatcher to enable FCC but I would like to modify some parameters in dji 2 ( have downland of your link) I changed file main.js but when i am going to change any parameters the one I have before come back.
I do not know what problem is. thanks
As a new guy firstly great vid very helpful. Question how you you know which firmware to select I have a Spark and an Air you chose one with the last number 300 why not the latest?
Hi digdato, Enjoy your Video's Was just wondering if you have a Spark and Can Show a Video on How To Do It. Or Should I Downgrade to the .300 fw then firmware with 701 Custom fw? Thanks
Some info for those who need to add an internal SD card - My Mavic Pro was built in mid-october, instead of glue in front of the sd card slot they used a very thin and runny type of sealant, it almost looks like thin bathtub caulk. It doesn't peel off as a sheet it comes off in tiny little chunks. I started with a tiny flathead and finished with a sewing needle and take your time, you can do some damage if you're not careful, be sure you're not scraping the board or connections from the chip next to the sd slot. You just have to clean it up enough to lift the latch, then you slide the sd card into the little channels on the latch and lock it back down, you'll feel it snap in. My latch didn't come all the way off it only raised up to about 60 degrees but that was enough to slide the card in those little channels on the edges. I used an 8gb sandisk ultra class10 uhs1 and had formatted it with the mavic beforehand via go4, worked out great. I did a manual rollback defeat after that because dumldore 3.0 was not having any luck in the automated fashion. After a manual rollback defeat I double-flashed the AC to .0700 with dumldore and then the RC to .0400 to remove any messages from it. Note: on .0400 on a previous december 2017 build mavic and I had gimbal issues so I stick to .0700 it does the trick. - Hope this info helped someone!
Very nice tutorial, thanks work perfect !
Hi, thanks for the great video. I have done everything in the video and everything was ok, but when I go to the DJI go 4 app the altitude still the same 500m the maximum. I wonder why it's not change to the 10000 as I changed it on assistant 2 ? Is there any specific things i have to do? Please help me.
Thanks in advance 😀
☝️☝️
WOW - found your channel today, watched your vid and it was EXCELLENT. Awesome tutorial for us idiots. Love the orange wrap on your Mavic Pro...
thanks man, happy and safe flying!
hi there, for some reason everythings working but height limit. cant change the value
Really Really good video man!
Thank you so so much for letting me and everyone else fly once again! 🙏🥑
For any roadblocks, check the comments and follow the site details if needed. Good luck!
Thanks digdat, your tutorial was very useful.
I tried a first time with Dji Go 4.1.22 (not Mod.) and it did not take off in NFZ.
I repeated the procedure by reinstalling the 1.03.0700 and then the 1.04.0100, with a Djigo App 4.1.22.Mod (No NFZ) and it worked. On the RC it signals me "in NFZ", but I took all the sat., it is "Ready to fly".
I would like to know if I can update to 1.04.0300 (I found a Mod without 305 306 and 905) and keeps me the possibility to fly in NFZ or leave the 4.01? ...Thank you!
Thanks so much Steve!
Dear Steve, Sorry for my english, i writing from Italy, can you help me what Mavic Pro paraneter i have to modify and how, for switch off with Dji Assistant THE POSTERIOR BLACK SQUARE BIG LED on back of Drone?
I am running DJI Assistant 2 1.1.2.573 on my Mavic Pro. The aircraft and RC firmware are both version 01.03.0400. However, I am unable to locate "g_config_flying_limit_height_limit_enabled" when changing the flight parameters. I would really like to remove the altitude restrictions of my Mavic. Any suggestions or input would be greatly appreciated.
This video is over a year old. Is it p to date and still reliable? Thanks
Also, when I look at the bottom where it says the flashware update progress. It says nothing about the anti-rollback and the 2 Stages. I'm not sure what's happening. I really need hellp. It just keeps saying reflashing and then it finishes. But then the firmware never downgraded???
Im having the same issues
You have to: first downgrade from your actual firmware to 1.04.0300, and then you can use this tutorial. Hope help you!!
in your program dji asistand 2 update it to firmware 600 since you have it in that firmware then use the dumldor and load the firmware 300 and voila ami the same thing happened to me it would not let me but so I try it I think it will work
@@sebastiansgroppo7965 Thanks buddy. I did that and had to do 1.03.0700 twice and now it's showing 1.03.0700
@@budokaiboy hi Gregory . I have a few questions maybe u can help. I had the same problem. I also resolved by doing what u did and now am on 1.03.0700. I got as far as entering the new parameters as the video instructed. However when I power on the drone controller still reads no fly zone. We're u able to get past this? Also did u have to do the same with the controller? ANY HELP would be greatly appreciated.
I just need remove the NFZ for my MINI2 but still no sucess yet!! Any advice?
I just rolled back from 01.04.0300 to 01.03.0700 and wondering if I need to roll the RC back also? What about the Go App? Also, I have DJI googles, do they need attention also?
Hi Brett excellent explanation, I'm interested. I have a question, if my mavic pro has firmware 1.04.0500, can I use your program? I'm from Guatemala.
Regards
thanks for the great video, do you have the links for the MAC software to MOD the Mavic Pro? Would I be right to presume the steps would be the same?
Take a look at the channel. The video you are looking for was posted right after this one.
Nice and detailed tutorial, digdat, when would this approach be possible for mavic air? I've checked out your website and there said mavic air does't support, is it going to be an unsupported model forever or just for this time of period? Genuinely appreciate for you reply :)
Hi...this is great fun.
I changed SPARK g_config_fw_cfg_max_speed from 10 to 20 when flying telemetry with obstacle avoidance disabled (not enabled) read 13.X, which is essentially the same as factory setting. The video I reviewed afterward seemed faster. Any insight.?
Regarding YAW in normal mode (GPS mode?), which matters more
yaw_sensitive_gain or
g_config_hotpoint_max_yaw_rate or
something else?
Will changing value g_config_mode_sport_cfg_tors_gyro_range eliminate the annoying FPV default gimbal setting while in Sport mode?
please reply
thanks
This is an incredibly helpful document, and all the steps worked for me. But I still must be doing something wrong. DJI Go tells me I have to have a ceiling of 20-500m. Do I use a special version of DJI Go? Or something other than DJI Go?
we cant remove that 500m limit in the app, instead we bypass it so its not enforced
How? I get how to bypass it on the Mavic, but not how to bypass it on the iPhone.
Found my error. Missed the enable param that needs to be something other than "1". Just flew two 1000+m climbs on neighboring Cascade mtns.
Congratulations on the video.
I did exactly what you said and everything was perfect.
I just want some information.
Is it possible to change the frequency of radio transmission to FCC because I live in Brazil and I know that the frequency of the USA is greater its reach?
Hi Many thanks for the video. I've downloaded and tried the recommended fix but unfortunately still got the error message when flashing the firmware. is there anything else I can try. I've been told the RC may be bricked.
Wow, just 3 years later and your website is already defunct and domain up for sale?
Hi I have problem with paramter for starting motors in invert fly. I am specifically speaking about parameter:
"g_cfg_debug_motor_no_start_motor_check" after I will set it on "1" after mavic reboot it changes to "0". Any idea what is a cause and how to fix it ???
Where can I find more infos about memory card for platinum? Does it need to have something on it to work? cant find infos about that.
i deleted the nfz file in the latest firmware with a parsing tool because adb was not working for me finding the nfz file
i even managed to change the nfz version info name to my company name also firmware version nae in case my drone gets stolen
i learn a lot from you guys thanks
and yes there is no nfz without adb tools
i am going to borrow and test another craft and see if can bake it in without root
(P4Pro) here
Can you explain more ?
Can I briefly flash to fw1.04.100 (the costum one) at the first time? I'm in the latest firemwre ,mavic platinum. thanks!
I have a platinum to be delivered soon. With the SD card for the mods you mean the regular SD to simply insert in the side or do mean that I'd have to unscrew the whole drone? Really helpful video, thank you!
gotta open the shell, there is an internal SD card. Checkout this link for more information: dji.retroroms.info/howto/recorder-sdcard-fix
hello
do you know what does "ACC" mean in this parameters? g_config_mode_normal_cfg_vert_ACC_down
Tgat's fine to downgrade to 01.04.0300 taking all advatages, however how to handle flight data issues when New ones never to appear due to internal sd cars overloaded? Next fw 01.04.0400 has FIXED that. Or am i wrong
Nice , how do i modify my Phantom 4 Pro ?
Is there a way to change the battery parameters so that I can make my mavic 2 continue to fly until battery cell level gets down to 2.5v? Im currently working on a battery mod using 18650cells. These cells can be discharged down to 2.5v per cell.
Hello, good night, I ask you. why and why do you change the battery.
I made this change and in the app dji go 4 see. 4.2.16 I do not see the telemetry thank you
Awesome...work perfect....thanks!
Worked great 👍👍👍👍 where Can i Get djogo 4.22?
make sure you update your mavic to newest update and than use the dumldore v3.12 new beta version same link as in video. So new beta plus new update will solve any issue with flashing firmware thanks as well @digdat0 awesome work.
it didn't work for me first time tried again worked perfect if you guys struggling keep going
all steps worked but nothing changed in flight please help do i need to downgrade app as well
Ive got this working but I can't enter sport mode now. It just says intelligent flight modes have not been enabled and tells me to turn it on in main controller settings.. I can't find any setting. What's weird is all the intelligent flights modes do work
Hi, thanks for the video. Is there a way of making the drone tilt more in Atti mode. I can that your video shows GPS + and Sport + but is Atti + possible?
Thank you for your work, 2 questions for courtesy
1: all these mods can also be done on Spark?
2: the controller with which firmware version? we always talk about updating the drone but we never talk about the controller, thanks again friend.
Yes, on the spark rollback to .300 then use modded .701 firmware for best results. I don't talk about the RC, cause I always leave it as is. Usually there is zero reason to change the RC version .. it just complicates things, so i avoid it :)
digdat0 Thanks friend, you're a myth! everything is clear to me.
amigo espectacular tu video hice paso a paso todo lo que dijiste y pude.una vez termine fui a probar el Dron y Efectivamente quedo mucho mas potente lo subi solo 1100 metros no mas por que me dio miedo..pero lo que no me gusto es que perdí mis sensores de colisión frontales los tengo activados pero ya no funcionan. tambien perdi estabilidad,es decir el dron ya no es tan estable como antes tambien note que se chupa la batería en un momentito ahora solo vuelo 10 minutos como máximo y por ultimo lo mas preocupante es que en 2 ocasiones cuando dejaba de volar y prendia todo de nuevo el control remoto no se enlaza con el dron y para que se enlace me toco conectarme a internet actualizar al mismo 01.04.0100 y ahy si se conecta asi que pues inquietante lo que me sucede..si de pronto me puedes ayudar y me dices que hice mal o si a ti te pasa lo mismo o que debo hacer te lo agradeceria.muchas gracias y sos un duro
Hi. If setting the battery setting to non-dji one, is the intelligent return to home (I Dont remember the right expression concerning the auto RTH depending on the battery level vs distance) still working ? Thanks and many thanks for all you do
yes RTH still works, smart RTH does not
OK thanks for the answer
Thank you Steve! I was wandering: is it possible on a newer mavic pro without installing the SD card to downgrade to 1.03.700 make the nfz, top altitude mods and than upgrade to a "custom firmware" that doesnt need an sd card? Are the mods staying?
Thanks!!!
Unfortunately, no. On the newer,you have to install an SD card.
Hi Steve just inserted the SD card! Still confused. . are the two NFZ mods (..config_airport_limit_cfg..) enough do get rid of NFZ or you still have to root it and delete the 905 module??
Thanks!!!
I have a newer version of mavic pro. So i get "sd card error" when i rollback to 3.700. I need to change my internal sd card. Is there any guide for changing internal sd card? Not for teardown. Example: do i need to load any files to my new internal sd card or am i need to insert an empty sd card?
dji.retroroms.info/howto/recorder-sdcard-fix
tomek dragan Thanks. I will try it soon. Wish it works for 3.700 too.
ues the link below .. its pretty easy, 12 screws and one metal piece and some glue :)
digdat0 thanks for reply i like your videos. They are guiding me so well :) And im happy for i dont need files for new sd card
You will find several vids about it, also from digdat0
Why is there no custom firmware with .04.300?
Just not clear on doing this mod, so if I do this on my Platinum, remove the NFZ so it'll be like a Autel EVO, then I'll be able to update to current firmware & get the new DJI flight modes?
I am wondering is it okay to have -8??? In your other video they were set to -6. I am saying this so I don’t get prop wash
yeah the -6 was a typo in the last one, the comments made a note that it should be -8. -8 is very safe and is what i recommend to all people. flyflydrones.com/pages/custom-flight-parameters
@@digdat0 What is the maximum speed of descent that we can operate safely?
Is this roll-back only necessary if you want to mod NFZ and the height limit? I just want to edit the sport+ mode on my Mavic Pro (produced may 2018). Can I do that without opening my bird up and fixing the SD-card
hi Steve,
already added a com/question on your former video, but now, as I followed your steps, the ancient version of Assistant2 does not recognize my devices when plugged... Funny, isn't it? I had to reinstall the latest Assistant to use them. Will this rollback still be accessible?
thanks i have question in mavic air which framwere i downgrade for it ?