I just bought the case. I haven't install anything yet cause I'm still figuring out the wires. One thing I notice the sata cable is connected to another cable. If we detect the sata and use the other cable with the 4 pin and connect to the Mobo does it work?
I have a problem with the fans in my build with this case, i have to plug them into my argb fan header which makes a whining noise, but when i plug them into my regular fan headers they don’t work, i don’t what to do and have been questioning if i should just get a new case or find out what the problem is
@@عبدالعزيزالاسطورة-خ1د connect the 3 Pin ARGB header in your motheboard. Download Mystic light and press the LED button for 3 seconds. And it will work
Hi Perk, I'm a beginner and I've a big with the rear tray. I would like to install my graphic card and I can't remove the tray, It's stuck. How you remove them ?
You have the top panel wires connected to the wrong prongs on your motherboard. I'd be willing to bet your power button turns on the fans or nothing at all.
@@LivingwithPerksto what should I connect them? I'm pretty confused since the case fans are connected with a molex cable and the front panel connectors are just standard, power reset and light cables
@LivingwithPerks how do you do sorry? With the with the front panel connectors? Am i supposued to wire up the reset switch for the light contorls. Im using a salvaged oem motherboard and havent a reaet header. Is that how that little white button changed the fans? Thnx u
I can’t change the rgb fans please help 😭🙏
I have the same case and my fans are flickering can you show me how your fans cables are connected in the back panel?
You might need a better power supply. I run all AMD equipment and its low efficiency so my PSU was more than enough for the lights/fans.
what motherbored do you have
@@gamingwithjaxson3710 PC mate B350
This video has taught me: Children's Scissors > Knives and Daggers.
Absolutely!
I can’t seem to get my fans to turn on idk if it’s my mother bored not having the right port for the cables or what please help
@@dipper330 make sure they are connected to the sata psu
really do you need more of 2 HD... u can use ssd m.2
My motherboard only has a spot for a single m.2 stick and it's being used. I play a lot of retro games/emulators so the HDD space was nice.
What power supply do you use
make sure to subscribe!
I just bought the case. I haven't install anything yet cause I'm still figuring out the wires. One thing I notice the sata cable is connected to another cable. If we detect the sata and use the other cable with the 4 pin and connect to the Mobo does it work?
It should. Just follow your mobo instructions
Hi, I got an issue, I have a Msi Tomahawk b550 and three fans on the case are not turning on for some reason
You have to connect the fans to the power supply. I had the same issue trying to use my mobo.
I have a problem with the fans in my build with this case, i have to plug them into my argb fan header which makes a whining noise, but when i plug them into my regular fan headers they don’t work, i don’t what to do and have been questioning if i should just get a new case or find out what the problem is
The fans are powered by the old school sata plug
You don’t know how much this helped. Thank you so much!
This might sound stupid but i have no idea where the sata plug is, just ripped open my build to change it then had a brain fart through it
Also how did you get the bavk fan to spin. I used the sata port but only the front free statted spinning
You have to daisy chain all of them
does this case comes with any ARGB controller behind the case for all the ARGB fans?
Bro me to i have same case but i’can chenge the color
@@عبدالعزيزالاسطورة-خ1د connect the 3 Pin ARGB header in your motheboard. Download Mystic light and press the LED button for 3 seconds. And it will work
@@khanmarjanhossen2245 lemme try that out, gotta thank you lol
U can change it from restart button from the case
Thanks - please subscribe! 🖤
What power supply
Do
You use
therm
al
take
500w
hey I'm buying the same case but how you plug the RGB Fans pls ?
@@Spiderlidl sata cable to the psu
Hi Perk,
I'm a beginner and I've a big with the rear tray. I would like to install my graphic card and I can't remove the tray, It's stuck.
How you remove them ?
@@marcperron3289 there is usually a clip/tab on the graphic card you have to press down to release it. Check your model and find where the tab is.
@@LivingwithPerksno I can't remove the flaps on the back of the case
Which motherboard do you have cause i cant find the wide sata port on my motherboard
@@GoodyGoody821 I have a PCMate B350
How to remove it's front panel ?
I'm not sure I haven't tried. Normally there is clips on front panels you just pry off.
i bought the same case in white ant want to cvhange the fan rgb but when i press the button up top and it only resets the pc , pls help
you connected the wires to your mobo wrong. Double check you have them in the right order.
I have the same issue, where do we plug the reset switch connection into the motherboard for changing RGB colour?
@@Cenati0n4Life you need to review your motherboard pins.
Are casing fans lound? how much decibal?
Actually no. My HDD is louder than the fans. I dunno how to rate decibal tho
Thanks man for this video comment, I finally able to light up all of my pc fan 😅😂😂😅🤣🤣🤣🤭🤭🤭
Thanks - please subscribe! 🖤
Does it have dustt filter on front?
There is dust filter on the bottom. The front will just need to be removed with a vacuum.
How did u get the fans working
With the sata cable that comes from the PSU
Cooling any good
Yessir - please subscribe! 🖤
Please put GPU in the top slot. losing performance
There is only 1 slot on the B350?
does the pc case come with an argb fan hub?
It does not.
Mine if i press the fan colour button , it's directly restarting the pc 😅 i don't know what to do. Do you have any idea?
You have the top panel wires connected to the wrong prongs on your motherboard. I'd be willing to bet your power button turns on the fans or nothing at all.
@@LivingwithPerksto what should I connect them? I'm pretty confused since the case fans are connected with a molex cable and the front panel connectors are just standard, power reset and light cables
@@nikolaorsmth you need to check your motherboard instructions the front panel buttons connect to some very small singular prongs.
Yo compre la gandias gc5 que trae una pantalla pero no logro hacer que encienda
Necesitas una mejor fuente de poder
@@angel-dh6jw tengo una Thermaltake 850w 80 silver
Ya supe que era pero me genera un conflicto con la board
Thanks - please subscribe! 🖤
Nice video ❤
вай, почему у меня не переключаться цвета?( только один режим((
make sure to subscribe!
My leds are stuck green
Reconnect to your MOBO
@LivingwithPerks how do you do sorry? With the with the front panel connectors? Am i supposued to wire up the reset switch for the light contorls. Im using a salvaged oem motherboard and havent a reaet header.
Is that how that little white button changed the fans? Thnx u
@@majorskies7091 the Led button on top of the tower chassis does change the color of the LEDs in the fans
damn cool case
Absolutely. I love it so far.
fucking vidio he also made a vidio with gc1 he make some crucial editing to make people
not sure what this means but thanks!
@@LivingwithPerks ok
What power supply do you use
thermaltake 500w
What power supply do you use
Thermaltake Smart 500 W 80+ Certified ATX Power Supply