How to apply QR Code stickers to a vehicle
HTML-код
- Опубликовано: 21 авг 2024
- www.qrcodestick...
Firstly ensure you vehicle is clean and free from dirt then carefully choose where your stickers are to go. Remember, your clients have to be able to scan them easily so too low or too high and people won't bother.
Now offer the QR Code sticker up to the chosen position and make sure it is clear of any bodywork styling or panel gaps and you're ready to start. Now, simply clean the area with warm soapy water and leave wet.
Remove the QR Code sticker from the backing sheet by peeling from one corner then apply directly to the vehicle. Now that the QR Code sticker is on your vehicle you can tweak its position by sliding it around. This is why they are always applied to a wet surface !
Once you are satisfied with the QR Code stickers position use a squeezy, or Ice scraper or even a credit card to gently smooth out the air bubble and water residue....work from the centre outwards for best results.
All you have to do now is pat the QR Code sticker dry with a cloth, stand back and admire your handy work then let it dry naturally for half an hour or so.
Here are the bullet points
1. Decide where you want the QR Code sticker
2. Make sure the area is clean
3. Take 2 bits of masking tape and place on the vehicle panel where the top of the QR code sticker is going to be, make sure the spacing is within the width of the QR Code sticker.
4. Make sure the QR Code Sticker is level, you can use a straight edge and a mobile phone app or a spirit level.
5. Wet the area with warm soapy water (no need to dry)
6. Peel the backing off the QR Code Sticker and lay onto the Soapy water area you want you QR Code Sticker to be
7. Because to area is slippery with the soapy solution, it is easy to slide into place
8. When you are happy with the position, use a squeegee or credit card to press out any air bubbles behind the QR Code Sticker and make it smooth
9. Dab the area dry with a cloth and leave to dry out,(depends on weather how quickly this happen.
10. When dry, the exterior grade glue backing on the QR Code sticker will have adhered to the panel and you will be able to drive business to your V-card or Website by people scanning your new QR Code sticker.
Hi, the smallest we would recommend would be 150mm x 200mm, with a command action on them, something like Scan me to visit our website, or vCard, or Checkatrade page. One on each side, one on the back doors and one on the Bonnet.
Thanks
Can you send me we’re u got this from I wld like one for my business
thanks for the vid. What is the smallest size you would recommend a qr code on a vehicle? thanks