Pro Tip - re-evaluate Flushing Volumes Multiplier if you previously used a custom value other than the default of 1.0. Prior to the BETA 2 of v1.10, I used LeonFisherSkipper's custom GCODE to implement the long retraction, and I consistently used the Flushing Volumes Multiplier of 0.5 with 0 bleed issues. However, after using 1.10 BETA 2, where I switched from the custom GCODE to using the Long Retraction Cut with each filament I was using, as well as the at the printer level (I had to turn on the Dev Mode to get to that setting), and I had black PETG bleed into Orange PETG. I don't know if the bleeding was the result of switching from LeonFisherSkipper's GCODE to the native long retraction (both in the filament and printer settings) and/or the color purge reductions Bambu Lab made, but something resulted in color bleeding I have never had before. So, going forward, I will be testing stepping down from the default multiplier of 1.0 like I did back in the day when I got to the multiplier of 0.5 with the custom GCODE. The lesson learned that I should have tested both changes independently before doing a large print and encountering bleed. I.E. I threw change management out the window by making 2 major changes at once and got burned/bled by doing so.😁
Thank you for the recap. I cant wait to go home and see how this will improve my printing experience. Also excited to hear more news about the upcoming printer from Bambu 😬
So many new things.. I dont understand a few of them, seems like this would be a good time to make some more in depth videos about some of these features.. Thanks for posting!
Thank you Nick! There are a lot of new features that I’m really interested in, like the brim ears, and the new SVG feature, and so many more. I’ll definitely be re-watching this video to really soakthis in.
I personally didn't like the new way it treats SVGs. I was in the middle of creating a model within the slicer when I decided to upgrade the slicer. Old software recognized the SVG as separate parts which made it easy to paint each section. The new software uploaded it as 1 object with less detail. Luckily orca still recognized the SVG the old way and I was able to export it as a 3MF, then upload it to bambu studio and continue my work. Maybe I'm doing something wrong, but I couldn't see any settings to break up the SVG after uploading it into bambu. Just adjustments to angle and thickness.
On the shrinkage percentage, when i print abs after it cool my round part doesn’t shrink / evenly after noon i have a high and low spot. So if i print 3 inch cirlce after cools down it 2.990 and 3.005 what should i put for the shrinkage percent ?
When I switch off the default Smart Scarf Seam option the slicer and printer (A1) still makes a scarf seam. Is there a way to still get a simple seam like in the previous version?
Hello, one of the biggest innovations. Texts are now mixed in english and german. Even when trying to print a "Benchy" there are at least 3 warnings. Very helpful 🤔👍
I upgraded to this version of the software. I have a stubborn model I'm trying to print that is lifting on a corner. I switched the brim setting to "painted" and then used the brim ears tool. BUT, after I slice, the brim ears disappear. I tried printing, and it just started printing my model. I thought the brim would be printed first? Any suggestions? Shouldn't we see the brim ears after slicing and before sending to the printer?
I updated this last night and wow this is the biggest update in a while! Does the AMS retraction bit apply to the A1? It already creates quite a bit less poo than the P1S/X1C. Only Bambu filament is strange but that's probably nothing that me just manually entering it as Bambu filament can't fix. 😛
Some great changes. I updated but had to roll back. It was so slow and unresponsive. I was unable to pan a part in the preview section. Back to the previous version I had and working normally again. I'll wait for the next update to hopefully fix that issue.
What would be great is the ability for the app to get the correct price for bambu filament. It seems to like defaulting to 27.99 (iirc) when I buy mine at 11.99 currently.
Ok? So i updated my bambu studio on my laptop, but 99% of the time i use bambu HANDY. Because whenever I download a file from makerwork on studio and try to print it, it gives layer errors and im too new to this to understand how to fix it or even what it is complaining about. All that said, will I still get the multicolor purge optimization on handy as well?
Dont think you follow me, bought 2 X1Cs on a whim. First 3d printers ive ever owned. 0 3d modeling exp in any program ever. So when I say I dont understand, its not something a wiki page is going to solve. Im lacking the months or years of learning curve. For now im just printing things off makerworld others have made, hense why I asked if HANDY is also getting the multicolor purge optimization, because i dont understand how to get studio to actually do its fucking job. HANDY on the other hand "no pun intended" just simply works with like 3 button presses.
@@herpderp1662 What is the exact "layer error" you are referring to? Sometimes the models you download will have little popups in the bottom right that are warning you about floating elements, etc, but you can still print it anyway because the file will print correctly regardless. Either way, you are doing yourself a massive disservice by owning two expensive 3d printers and only using the app to print. Familiarizing yourself with the slicer will make 3d printing much more engaging and customizable, and when you run into issues with something you printed from the app, you will be able to tweak settings to make it work. If you can tell me the exact error you're talking about, I can help you get it to work myself as I'm almost positive it's an easy fix or something you can ignore.
@@Lyth I dont disagree, ive been dabbling with studio here and there when I had time. But i recently got fired because my boss "owner of the company" said he was upset the bullet missed, and I disapproved of that line of thinking regardless of who your referring too. So now I have infinite time to sit and learn this software. Yes it was a floating error. I didnt know what that meant, and didnt know you could just tell it to print anyway. There was also a collision error on a couple of them, but when I opened up the file and looked at the model on the plate, none of the pieces were touching or colliding in any way. So for the time being i was just using the app instead. I havent made a 3d model yet, as ive never used ANY 3d modeling software before so not only is 3d printing new to me, so is the concept of modeling. I bought these machines to assist with making enclosures and fittings for a company me and a buddy are starting up. But latelly they have been relegated to printing little bobbles and hueforge stuff to show off what the machine CAN do if I actually knew what to do with it.
The amount of capabilities are almost overwhelming but I'm nothing but satisfied with Bambu my printer was worth every penny and I always question price tags
hmmm that brim ear option. i have the version 1.9.7.5 and it included that brim option. I am new here. just starting to use the app and I notice that round shape brim and it called my attention. it was added automatically
I dont know why but this new version runs very laggy on both of my PCs. Maybe there is an issue with AMD and Bambu Studio? I had to roll back to 1.09. Sad cause these updates are cool!!
This is good news, but 2 things don't work here: - Autocalibration for the A series, because firmware 01.04.00.00 is not yet available - Importing STEP files, which causes Bambu Studio to crash
A good video but I do have one thing I would like to put across . Why do you have to go through it so FAST . Some of us can't keep up with it to soaking information as quick as you're giving it out . May I suggest you just slow it down .... the image you're putting on the screen if you blink you miss them ... for that reason I'm NOT going to give you a thumbs up on this occasion ..
I'll keep that in mind. There are speed controls in RUclips. Many people like that I do not fluffy my videos,but I will definitely slow it down more for these updates.
@ thank you very much . speed controls don't work when you're watching it on a TV . And it mark up the sound . Make the video slower and longer in my view makes it much more pleasant to watch ....
Hardly ground breaking stuff "You wont believe the new features". Rather hyperbolic. A few neat features but nothing major really here. Orca Slicer has a lot more interesting stuff in its last release.
@bruderbrot5268 Less the price side more of the walled garden ecosystem the fanbase tries to tout. Most of Bambus "innovations" have been around for a lot longer than they have been a company. But yet videos like this come out that call all the updates "groundbreaking" or "revolutionary". I don't have an issue with the the machines. Just the folks that are blissfully unaware.
Nice for the added features but some nasty bugs as well. - Regular crashes on Mac Sonoma. - Cannot find A1 until restart of A1. - If it does find the A1, connection code must be entered. (I'm using LAN ONLY mode.)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Pro Tip - re-evaluate Flushing Volumes Multiplier if you previously used a custom value other than the default of 1.0.
Prior to the BETA 2 of v1.10, I used LeonFisherSkipper's custom GCODE to implement the long retraction, and I consistently used the Flushing Volumes Multiplier of 0.5 with 0 bleed issues. However, after using 1.10 BETA 2, where I switched from the custom GCODE to using the Long Retraction Cut with each filament I was using, as well as the at the printer level (I had to turn on the Dev Mode to get to that setting), and I had black PETG bleed into Orange PETG.
I don't know if the bleeding was the result of switching from LeonFisherSkipper's GCODE to the native long retraction (both in the filament and printer settings) and/or the color purge reductions Bambu Lab made, but something resulted in color bleeding I have never had before. So, going forward, I will be testing stepping down from the default multiplier of 1.0 like I did back in the day when I got to the multiplier of 0.5 with the custom GCODE.
The lesson learned that I should have tested both changes independently before doing a large print and encountering bleed. I.E. I threw change management out the window by making 2 major changes at once and got burned/bled by doing so.😁
@@hotfix7387 great info! Pinned!
That's wild. This update fixed a few of the complaints I brought up in my video after having my A1 mini for 100 days. Thanks for sharing!
Good to hear! I also enjoyed many of the updates.
the boolean tool: yes! finally! I've been waiting for this for so long.
honestly almost all the new improvements are something I really wanted
EXCITED TO DOWNLOAD THIS UPDATE
Gonna try it. But waiting for Orca slicer to integrate these features
Does anyone know how long that will take? I don't know how long it typically take Orca to implement the updates from BBL
Thank you for the recap. I cant wait to go home and see how this will improve my printing experience. Also excited to hear more news about the upcoming printer from Bambu 😬
thanks for the video, some great information
Glad to hear it was helpful!
Thanks for the overview. Was hoping for a snap to grid function when moving parts as well as being able to change grid size.
Great video! Thanks for the rundown
@@TylrVncnt glad I could help!
So many new things.. I dont understand a few of them, seems like this would be a good time to make some more in depth videos about some of these features.. Thanks for posting!
Will do!
Brim ears! Thank you Bambu Lab!
Yes awesome addition! 👏😁
Finally a manual mouse ear,s now to wait for orca to implement it haha
Thank you Nick!
There are a lot of new features that I’m really interested in, like the brim ears, and the new SVG feature, and so many more.
I’ll definitely be re-watching this video to really soakthis in.
I personally didn't like the new way it treats SVGs. I was in the middle of creating a model within the slicer when I decided to upgrade the slicer. Old software recognized the SVG as separate parts which made it easy to paint each section. The new software uploaded it as 1 object with less detail.
Luckily orca still recognized the SVG the old way and I was able to export it as a 3MF, then upload it to bambu studio and continue my work. Maybe I'm doing something wrong, but I couldn't see any settings to break up the SVG after uploading it into bambu. Just adjustments to angle and thickness.
Good quick overview, thanks!
Nice work. Like the way you explain the new features in a way that "non die hards" understand. 👌
@@GamingWithURO you are welcome, glad I could help!
On the shrinkage percentage, when i print abs after it cool my round part doesn’t shrink / evenly after noon i have a high and low spot. So if i print 3 inch cirlce after cools down it 2.990 and 3.005 what should i put for the shrinkage percent ?
thank you, very concise, much quiicker for me than reading thr realise notes
@@a-091-l2j great, that was the complete point. Glad I was able to help.
The auto cal for a1 does not seem available and references a firmware not yet available
When I switch off the default Smart Scarf Seam option the slicer and printer (A1) still makes a scarf seam. Is there a way to still get a simple seam like in the previous version?
Thanks for the overview,! the release notes had been a bit too much for a beginner like myself
Wow great video and so many updates, it will take months to go through them all
Perhaps in the next update the 'Print History' will allow you to print directly from it.
I concur 😀
Can't you go to device > MicroSd card > model for that ?
@@Samael609sometimes you won't see it in your app
If you have their app on phone, you can do that…
I constantly do that with the app...
Thank you. So much to learn to keep up!
When will this latest version for an X1C be available?
Hello, one of the biggest innovations. Texts are now mixed in english and german. Even when trying to print a "Benchy" there are at least 3 warnings. Very helpful 🤔👍
I upgraded to this version of the software. I have a stubborn model I'm trying to print that is lifting on a corner.
I switched the brim setting to "painted" and then used the brim ears tool. BUT, after I slice, the brim ears disappear. I tried printing, and it just started printing my model. I thought the brim would be printed first? Any suggestions? Shouldn't we see the brim ears after slicing and before sending to the printer?
After you finish drawing, you need to exit the Brim tool for it to take effect
The brim ear tool is must have. Good to see they implemented it.
My day is much better now
This is great and definitely building for that new printer incoming.
That's what I'm thinking
I updated this last night and wow this is the biggest update in a while!
Does the AMS retraction bit apply to the A1? It already creates quite a bit less poo than the P1S/X1C. Only Bambu filament is strange but that's probably nothing that me just manually entering it as Bambu filament can't fix. 😛
do u also make videos about orca slicer? the svg function is the best update imo
Nice to know what I’m getting when I’m pressing update great video excellently explained
Thanks!
Hey thank you I appreciate that!😊😅🎉
good video, i was planning to read the update notes, now i don't have to :) .. good explanations also, thank you
Some great changes. I updated but had to roll back. It was so slow and unresponsive. I was unable to pan a part in the preview section. Back to the previous version I had and working normally again. I'll wait for the next update to hopefully fix that issue.
Thank you ,..man:)
@@valsimotdesign you're very welcome
Love the new svg features
Great video! Thanks for the info!
What would be great is the ability for the app to get the correct price for bambu filament. It seems to like defaulting to 27.99 (iirc) when I buy mine at 11.99 currently.
Ok? So i updated my bambu studio on my laptop, but 99% of the time i use bambu HANDY. Because whenever I download a file from makerwork on studio and try to print it, it gives layer errors and im too new to this to understand how to fix it or even what it is complaining about. All that said, will I still get the multicolor purge optimization on handy as well?
Hey bambu has a wiki, have you tried going through it to familiarize yourself with all the features ?
Dont think you follow me, bought 2 X1Cs on a whim. First 3d printers ive ever owned. 0 3d modeling exp in any program ever. So when I say I dont understand, its not something a wiki page is going to solve. Im lacking the months or years of learning curve. For now im just printing things off makerworld others have made, hense why I asked if HANDY is also getting the multicolor purge optimization, because i dont understand how to get studio to actually do its fucking job. HANDY on the other hand "no pun intended" just simply works with like 3 button presses.
@@herpderp1662 What is the exact "layer error" you are referring to? Sometimes the models you download will have little popups in the bottom right that are warning you about floating elements, etc, but you can still print it anyway because the file will print correctly regardless. Either way, you are doing yourself a massive disservice by owning two expensive 3d printers and only using the app to print. Familiarizing yourself with the slicer will make 3d printing much more engaging and customizable, and when you run into issues with something you printed from the app, you will be able to tweak settings to make it work. If you can tell me the exact error you're talking about, I can help you get it to work myself as I'm almost positive it's an easy fix or something you can ignore.
@@Lyth I dont disagree, ive been dabbling with studio here and there when I had time. But i recently got fired because my boss "owner of the company" said he was upset the bullet missed, and I disapproved of that line of thinking regardless of who your referring too. So now I have infinite time to sit and learn this software. Yes it was a floating error. I didnt know what that meant, and didnt know you could just tell it to print anyway. There was also a collision error on a couple of them, but when I opened up the file and looked at the model on the plate, none of the pieces were touching or colliding in any way. So for the time being i was just using the app instead. I havent made a 3d model yet, as ive never used ANY 3d modeling software before so not only is 3d printing new to me, so is the concept of modeling. I bought these machines to assist with making enclosures and fittings for a company me and a buddy are starting up. But latelly they have been relegated to printing little bobbles and hueforge stuff to show off what the machine CAN do if I actually knew what to do with it.
The A1 does NOT get auto calibration. It relies on 1.04 firmware which has not been released. Also no finish time.
Finally they implemented the lan mode changes so you can use the printer in lan mode from a different network
The amount of capabilities are almost overwhelming but I'm nothing but satisfied with Bambu my printer was worth every penny and I always question price tags
It still doesn't run on Wayland in Ubuntu 24.10. The plater is invisible.
Crashed on my intel iMac.. esp. with multiple plates .. went back to previous version!! 😢😢
hmmm that brim ear option. i have the version 1.9.7.5 and it included that brim option. I am new here. just starting to use the app and I notice that round shape brim and it called my attention. it was added automatically
I dont know why but this new version runs very laggy on both of my PCs. Maybe there is an issue with AMD and Bambu Studio?
I had to roll back to 1.09. Sad cause these updates are cool!!
Wish they had a proper iPad app
I tried this new update but, for whatever reason, I couldn’t turn off scarf seams so I had to downgrade.
i coudnt import step models so immedialty downgraded too
@@DoktorSkill me too
The answer to my scarf issue is at 2:15 thank you @Bam Bam for solving all of my life’s problems!
And still no handling with copies/instances of same object
I just want my sd card with folders to show on the bambu. Its a mess that it shows all files together
New update breaks the Device tab for updating AMS status. Sometimes with the Temps too.
Actually not hard to believe. So no. Title is not correct.
I personally love the brim ears 😆😂
Finish time doesn't work for me. Its blank.
This is good news, but 2 things don't work here:
- Autocalibration for the A series, because firmware 01.04.00.00 is not yet available
- Importing STEP files, which causes Bambu Studio to crash
The step import crash is a bug, but it can be used normally in English language
@@cainpian5139 Thank you. I also saw that there was a temporary version that fixed this bug, and a new version should be out soon.
with step files go freezes and crashes
Use English language
This is not the latest update, I have been running 1.10.0.89 for quite awhile now.
A1 has autocalibration but not P1, come on Bambu. I get that its a difference between X1 and P1 but come on.
@@Yankees177 as soon as the updated firmware is released.
Its missing for me? And i have 1.10.1.50
I don't believe you
(as in, stop with the damn clickbait)
Made you click though
Lol this guy needs to chill and go print something
😂😆😂😂😂
Hearted 💗
The bools will be great for users to put their own eye holes in masks
How do you know i won't believe it?
Too bad bambu filaments are 9 out of 10 times sold out...
Also, why is this feature only for their brand filaments?
everytime i update my printer it stop working properly
I wish Bambu Labs didn't update and improve their products. It's hard to keep up!
.
.
.
.
JK! 😹
lol right
A good video but I do have one thing I would like to put across . Why do you have to go through it so FAST . Some of us can't keep up with it to soaking information as quick as you're giving it out . May I suggest you just slow it down .... the image you're putting on the screen if you blink you miss them ... for that reason I'm NOT going to give you a thumbs up on this occasion ..
I'll keep that in mind. There are speed controls in RUclips. Many people like that I do not fluffy my videos,but I will definitely slow it down more for these updates.
@ thank you very much . speed controls don't work when you're watching it on a TV . And it mark up the sound . Make the video slower and longer in my view makes it much more pleasant to watch ....
Hardly ground breaking stuff "You wont believe the new features". Rather hyperbolic. A few neat features but nothing major really here. Orca Slicer has a lot more interesting stuff in its last release.
I love Orcas in built test tools.
The brim ears are really cool, have been waiting for this feature forever!
Bambu boys are like apple boys. Give old features a new name and call it innovative. Then sell it at a premium.
@ why those Apple comparisons? Bambu printers are super cheap. I paid 500 for an A1 combo; Prusa MK4s /w MMU is 1500!
@bruderbrot5268 Less the price side more of the walled garden ecosystem the fanbase tries to tout. Most of Bambus "innovations" have been around for a lot longer than they have been a company. But yet videos like this come out that call all the updates "groundbreaking" or "revolutionary". I don't have an issue with the the machines. Just the folks that are blissfully unaware.
copy/paste
Didn't watch the video as the title said I "won't believe" what's in it anyway...
BUGGY release.. Enjoy!
good b ut SLOW down!
Nice for the added features but some nasty bugs as well.
- Regular crashes on Mac Sonoma.
- Cannot find A1 until restart of A1.
- If it does find the A1, connection code must be entered.
(I'm using LAN ONLY mode.)