How to | Assemble Drum Brakes
HTML-код
- Опубликовано: 26 дек 2019
- In this video, we will show you how to rebuild a GM 9-1/2 Inch Drum Brake. All of these parts and components can be purchased at www.inlinetube.com and can be found in the links below!
Parts:
Left Rear Drum Brake Backing Plate -
www.inlinetube.com/products/b...
Right Rear Drum Brake Backing Plate -
www.inlinetube.com/products/b...
Emergency Brake Cable -
www.inlinetube.com/products/r...
Rear Drum Brake Adjusting Hardware Right Side -
www.inlinetube.com/products/i...
Rear Drum Adjusting Hardware Left Side -
www.inlinetube.com/products/i...
Rear Drum Wheel Cylinder -
www.inlinetube.com/products/w...
Rear Drum Spring Kit -
www.inlinetube.com/products/i...
Drum Wheel Cylinder Pin 4pc Kit -
www.inlinetube.com/products/b...
Rear Drum Space Bar 1pc -
www.inlinetube.com/products/b...
Car Wheel Cylinder Bolt 4pc -
www.inlinetube.com/products/b...
Brake Shoe Washer 1pc -
www.inlinetube.com/products/b...
Rear Axle Flange Gasket Behind Backing Plate -
www.inlinetube.com/products/i...
Parking Brake Drum Lever Pair -
www.inlinetube.com/products/b...
Rear Drum Brake Shoes 4pc -
www.inlinetube.com/products/i...
9 1/2" Rear Brake Drum 1pc -
www.inlinetube.com/products/w...
You can follow us on social media:
Facebook: / inlinetube
Twitter: / inlinetube
Instagram: / inlinetube
Inline Tube support can be reached via support@inlinetube.com
Subscribe to our channel for new videos and content. Please leave a comment below about any future videos that you would like to see. Also, don’t forget to click the like button! 
Авто/Мото
Great vid, been fighting rebuild kits missing parts and this FINALLY helped me figure it out.
Probably the best how to video I’ve ever seen!! Well done !!
This isn't why RUclips exists, but the value of videos like this is greater than the sites original intensions.
Thanks !! glad you liked our video!!
Finally an actual step by step for drum brakes. I feel more at ease about doing the work on my c10
Best easy to understand video for 9.5" drums I've seen. I like that it is to the point with no B.S. Wish I had watched this before I did my brakes as it would have saved me a lot of frustrations. Thanks for the excellent video!
Glad we could help!!
Buenas tardes mi nonbre es Isaias y bibo en Colombia, pregunta quiero canbiar los bijitos por nuevos mi camioneta tiene el mismo sistema. que estoy biendo en el video pero nolos epodido encontrar, que preguntar que valor tiene espara las dos rruedas para parte de atras
best video of the sort. So many other frustrating ones out there that skip these steps.
I finally found a video where they actually showed it step by step👍🏻
Excellent video...best I've seen...clear and slow. I could see everything being done....thanks.
Great video!!! Helped me out putting brakes on my new axle. Didn't have any references beside this. Easy peasy.
Awesome video. Anyone who watches it can feel confident to do it! Thank you!
Thanks!! Glad you liked it.
Just saved my ass on my 72
This guy is good, he explains it in detail, shows everybody how it is done ,also taking his time, step by step. good job bro!!!!!!!
Excellent. For those watching, be aware at 5:00 that the red spring between the 2 pads feeds through with the wire hook to the top above the sprocket wheel. For the opposite drum, it is not only facing the other way but inserts opposite. Otherwise, the end hook will foul the sprocket teeth on one side, found only when done and trying to adjust, and all from following a different 'professional' guide online. In the video the hook goes into the pad from the top, the opposite drum is not only facing the other direction, but needs to start from the back, not the top as well.
excellent video, thanks for going to a lot of trouble and teach us all the correct way to do a job
Glad we could help!!
Thank you for this video! Would have been totally lost without this for my Inline Tube brake replacement!
You are very welcome. Please let us know if you need anything in the future.
Excellent video, Just the kind I was looking for. Really helping Me with My 65 C10 pickup. Thanks
Great video
Thanks bud! First time for me and u made this very simple! Didn't have those tools but pliers and flat head screwdriver sufficed
Thanks the only other video I found with step by step was in super fast forward lol this will help me get the job done....too bad I got the wrong pads or it would already be done.
Glad we could help get your job done!! We carry all the parts in the video. Check out the website if you need any of them.
Thank you for the excellent video. Very well done!
Glad you enjoyed it!
Excellent video! Wish I had ordered from you guys on my brake parts but will definitely do so in the future as thanks for the great video! Need lots of stuff for my 86 k10
Absolutely let us know if you need anything in the future!!
Great video. So much easier without an axle though.
I can't believe so many of these videos don't explain to fit the shoes to the drum first. New shoes ten to rock too much and will contribute to a spongy brake pedal. You can bend the shoes to allow only a rise of .030" on the opposite end of the shoe as you hold one end down in the drum. This is a standard procedure in competent shops. People that are watching this should pay attention to my instruction.
Awesome video!! Wasn't sure about the pivot due to it being a new design from oem. But this video helped me with that.
Glad we could help!!
Thank you Sr: nice n slow process: I got it 👌🏽
Glad we could help you.
Thanks sir
Nice video
Thank you
great video, just wondering if that's an S10, Sonoma or a Silverrado, Sierra.
Oh yea it's super easy laying on a table where you don't have gravity pulling all the parts to the ground.
Try doing it on a vehicle where gravity is your arch enemy.
Nice video btw I always wondered what are the small c clips for in the spring kit 😀
I wondered that too, only reason why I watched the video because I thought I was forgetting something.
@@carnut7615 C-clip is for another style of brake. The emergency brake lever on the other style has a stud that passes through the primary shoe and the c-clip hold the lever in place. FYI: on this second style of brake, there is a spring washer that goes on this stud and is positioned between the lever and the shoe. I don't think the spring washer is included in the kit.
nice
Thank you to show it
Could you show them rear dram brake Toyota Highlander 2000-2003 ?
sorry we do not carry that application.
It looks like the drum spreader/spacer bar is on the wrong way. All the other pictures and videos I have seen have the hump side going away from axle. Is this a mistake? Does it matter which way the bar goes?
You are correct !Hump side should face out . They should correct the video
Anybody notice what the C clips are for? They weren't used in the video, but when I pulled mine apart to do the job one fell out of somewhere and it was for a std 9.5 rebuild too.
Hello.
What the C-clip for?
Hi where do you get the color coded spring kit. My kit is generic all black. Please let me know. Thank you
Excellent video. Do you sell the brake tools? Sure beats trying to stretch a spring with three screw drivers: one in your mouth and two in your hands! Used you guys for replacement brake lines for a vintage Dodge truck. Excellent quality. Those GM 9.5" 14 bolt rear ends are not that common anymore. I was fortunate to find one. Thanks.
Thanks!! We do not sell the tools for this video. We appreciate your business!!
I've never seen something with that many springs in my life
Yes there are a lot of springs!!
Would the backing plate fit a factory 1986 El Camino? I I know I would have to pull axle s out. hate the clips want to change that to bolted wheel cylinder if I can. Thanks for the video
We do carry a backing plate for your Vehicle that has a bolt in wheel cylinder.
@@charlesmcmartin8659
Do you have the part number & a link to your store?
I guess it’s the same size shoe to?
The cylinder on passenger side fits really loose with the clip just seems to loose to me other side doesn’t move as much. But if I’m going to change the backing plate I rather have bolt on cylinders.
Thanks for your help
Thank you for your help
Do you really need the parking brake attached? I don't want to run a parking brake..
i wont pull the spring on hand
Look pretty easy when laid out on a table hopefully ac is not too cool for you in there
How about the driver side?
You will Repeat the same process on the other side.
there was 2 small c clips in spring bag but did not show where they go?
Please send a picture to support@inlinetube.com and we will get back to you with your answer.
not the same when on car with axel in way
be aware that many cylinder bolts are actually 7/16" not 3/8", obviously will find out.
yes there are a few different sizes for Wheel cylinder bolts that we carry.
After putting in the red spring rotate the car upside down ....
I give up.
Thanks sir