It's amazing how many bad mechanics or at least mechanics that don't know any better are on RUclips, holy cow please don't let this guy get hurt. JACK STANDS!!!!
One more dont beat it . Use a big socket and wedge between the hub and spindle and turn your wheel take out put the socket on the other side of the spindle and turn and back and forth it's way easy .maybe have the bord kid to help
I like all Chevy,dodge,ford I have owned them all, I was told to take a Nissan titan for a test ride I bought it 2017 titan model S I have near almost a 100000 km no issues I run 0w20 royal purple and royal purple for everything else it looks just like the day I bought it it's a good truck but if you dont maintain them they fall apart like the rest I don't give a shit if you hate Nissan..
Toyota is like the old humble master, Honda is like his skilled yet cocky son, and Nissian is like his rival who smirks all the time and slicks his hair back but trips over himself 3/4 times.
The vdc and slip light hsve 3 codes its a rod that goes in the steering wheel.. check your ABS sensor, ABS ring, and the angle steering sensor..... cost of it 1540..like i told em them lights can stay right there....... you have the passenger seatbelt lights flashing... lmao you csn try to reset it if the light still blinks are reset they want you to replace it.. 2500......i call mines the truck of many fixes
Don't fool yourself man .ive had all. Brands of trucks and. I'll never buy anything but nissan.new wheel hub assembly solves that bearing issue trust me it's no big deal.my truck 350.000 and still rolling!
@@MXguy95 i don't blame you. Doubtful, if i would have jacked it back down either. I was just giving some free advice. I've had steel rims that i drove around with loose lugs for a day or more before they broke free. I've also wrecked a couple rims banging.
Nissan titans are under rated trucks. Don’t sleep on them too much they have the reliability and power to tow . Years 04-14 that is, newer models have horrible engines
@@MXguy95 well when you can find a junkyard beater cars to do that that last video you guys did with Jim and Jesse that was very cool to watch but don't pick a 2wd drive this time
Only reason that titan still runs is its the 5.7 same motor as a tundra. Everything else on that truck is complete garbage. Hands down the worst looking trucks to ever hit the roads
The all around BFH persuader. Gets the job done. Great video Jay would have been more entertaining with knuckle busting finger pinching and cussing though. 😂🤣👍👍👍🕷🕷
Just whack the crap out of it it'll come off. Lol that's what I do when I work on my car I just whacked the crap out of things it always ends up working
@@MXguy95 Once you'd got the wheel off. Alloy wheels corroding to steel hubs is a real pain in the behind, it can really take some force to separate them and all it takes is a little copper grease to stop it happening...
Hey Jay, is there something wrong with your videos, or is it on my end? I can see about 2 minutes of it then it goes blank and says something went wrong. This is the second video that I’ve tried to watch.
It's amazing how many bad mechanics or at least mechanics that don't know any better are on RUclips, holy cow please don't let this guy get hurt. JACK STANDS!!!!
One more dont beat it . Use a big socket and wedge between the hub and spindle and turn your wheel take out put the socket on the other side of the spindle and turn and back and forth it's way easy .maybe have the bord kid to help
I like all Chevy,dodge,ford I have owned them all, I was told to take a Nissan titan for a test ride I bought it 2017 titan model S I have near almost a 100000 km no issues I run 0w20 royal purple and royal purple for everything else it looks just like the day I bought it it's a good truck but if you dont maintain them they fall apart like the rest I don't give a shit if you hate Nissan..
Toyota is like the old humble master, Honda is like his skilled yet cocky son, and Nissian is like his rival who smirks all the time and slicks his hair back but trips over himself 3/4 times.
You couldn't be more right.
The vdc and slip light hsve 3 codes its a rod that goes in the steering wheel.. check your ABS sensor, ABS ring, and the angle steering sensor..... cost of it 1540..like i told em them lights can stay right there....... you have the passenger seatbelt lights flashing... lmao you csn try to reset it if the light still blinks are reset they want you to replace it.. 2500......i call mines the truck of many fixes
Timken bearing assemblies are the way to go with Titans, not Chinese. They are changed every 150k…Chinese every 40k.
I just changed the front hubs on my '99 Wrangler. Right side was making that metallic grinding noise at speed. Bearings were shot.
Rob's Randomness are those bolt in or press in?
@@MXguy95 Bolt on
he's probably got a stash of Nissan's hidden somewhere
( totally not hoarding a huge collection of 1979-1981 Datsun 280z cars )
No Jay
We are all waiting on the Foxbody Mustang Convertible
White
Black top
Looks to be a 4 banger
Don't fool yourself man .ive had all. Brands of trucks and. I'll never buy anything but nissan.new wheel hub assembly solves that bearing issue trust me it's no big deal.my truck 350.000 and still rolling!
Everyones opinion is different lol. I cant stand them
Whenever, i have stuck wheels/rims. I just loosen the lugs and drive around a bit.
Breaks the most stubborn rims free without any hammering.
J T Reeaaalllly didn’t feel like dropping the jack and going back out in the cold.
@@MXguy95 i don't blame you. Doubtful, if i would have jacked it back down either. I was just giving some free advice. I've had steel rims that i drove around with loose lugs for a day or more before they broke free. I've also wrecked a couple rims banging.
Drill and tap the new herring for a grease fitting 💡. That’s what I do with sealed bearings. Even on riding mower cutting decks.
You know something jay that bad wheel bearing could be a reason for the ABS light, huh?
That much truck for $500? You got one hell of a deal!
Even if it is a Nissan...
granted, its got some miles, but a trucks a truck none the less !
Thanks for this great video ... i love this truck
Hi what's the mpg on those trucks???????
Feel better, cool video 😀
You never ever turn off Jimmy Hendrix :)
Yeah man! never turn off the riff Lord 🤘
Your not wrong there
YT might make a big deal out of copyrights these days.
Never in my life has a Jack ever done not shit like that . You must have some kids running around who need some chores.
Luv these old rescue rigs and putting them back to service, anyway to do a 88-98 GM pickup 4 by 4
Hope you feel better soon Jay
The maxima had a cheap easy fix whereas the titan being a titan a full size truck needed a 2 man job to fix her up.
Thanks for handling those nuts man, I was eating breakfast and didnt have to do shit.
I got it haha,
Been waiting for this. Nice!
And there you go !
Nissan titans are under rated trucks. Don’t sleep on them too much they have the reliability and power to tow . Years 04-14 that is, newer models have horrible engines
Jay did you sell the titan yet?
My preferred method to get the bearing out after the bolts are out, take the air chisel with a punch bit and rotate the bearing then hammer
I just went at it with my BFH , came apart fairly easy
Jay Smart For us up here in Ontario, the darn salt can make it very difficult. If aluminum and steel..can be fun.
I need to see you destroy a maxima.
Eder 427 I could do it with ease lol
You used the separator persuader 300, I had to use the separator persuader 3000 to get the wheel bearing off of my 99 Silverado
Betcha the ol' steer tires, and go left go right selector will feel better.
she sorta wonders like the lunch ladys eye, but its fine.. shes fine..
@@MXguy95 a guy has to steal that line LMAO. That wandering is factry circle track setting. It'll be fine lol
Do you still Owen the Nissan
I recommend putting some anti seize around the studs to make getting the wheel off much easier next time
Is no one gonna mention the subtle fury references because like same
braden weir yea I’ve seen other furries “fist bumping” him in chat so it’s pretty obvious lol
Uhhh what? I think your mistaken
its ok mah dood
@@MXguy95 its ok because... im a lil bit... sorta... ya know... some of the designs are neat ya know
Hope you feel well soon. :)
PB blaster helps
I was out, and too cold to go get more lol. No PB, just a bigger hammer
do video on that white fox body mustang convert in back ground
Orange12 Boss302 I will soon!
The best wheel bearings to do!! The one's that bolt in!!,Also would you sell the nissan titan for 800????? And a trade in???
Кайена Арельяно ah come on now wolf, can’t be doing that. We both know it’s worth a little more lol
@@MXguy95 if the lights on the dash go away sure,i trow 1500 and trow that van too! Got the 3.3 v6 with 176K
@@MXguy95 also you havent email me jackass!! I wana go to your yard for parts or find a new ride to drive back XD
8:01 reminds me of zip ties bias plies saying
Oh boy! He's starting to talk like Vice grip now, have to go and get me some cold snacks! :-)
Why does the vid cut out not even a full few minutes in? It stop in the same exact place
Your internet was not connecting and you were watching what was stored in your cache
It still won’t play
Show us the Econoline!!!
Take her up the back 40 hills! If you still have that
As much fun as it might be, Id risk damaging it, and can't afford for another rig to be down at the moment .
@@MXguy95 well when you can find a junkyard beater cars to do that that last video you guys did with Jim and Jesse that was very cool to watch but don't pick a 2wd drive this time
Nice. Truck
Nice Have a good day jay
Thanks Buddy! Same to you !
Only reason that titan still runs is its the 5.7 same motor as a tundra. Everything else on that truck is complete garbage. Hands down the worst looking trucks to ever hit the roads
Man I'd be a poorer man if I lived closer. I'd buy cars lol. I wish I had the knowledge you do on cars
Trust me, run as far as you can. I was a poorer man before all this started, and now Im broke and it aint no joke !
@@MXguy95 but you look like your doing well for yourself and by looking at the outside you look happy
Looks can be deceiving, but thanks for watching buddy!
I would of done the ball joints and tie rod ends when it was apart.
Jason Robinson eh, they were fine, and I’m a poor man. The dodge needs repairs too that I’m putting off due to finances
Thank you! Your narrative of changing wheel bearings made me smile! Have a great day!
Thanks buddy! I appreciate it !
yay, thumbnail hints again!
Hints? what choo mean Fox? lol
@@MXguy95 hints to your... um... wolf side lol
"Half past dark thirty" which means it could be anywhere from 5:30 to midnight lololol
video play error
The all around BFH persuader. Gets the job done. Great video Jay would have been more entertaining with knuckle busting finger pinching and cussing though. 😂🤣👍👍👍🕷🕷
Chicom tires? I'm not familiar with that brand.
Someone's been watching vice grip garage.
yep, I miss grease fittings--
Doc that's why I like my 2007 GMC Sierra 1500 classic that I grease every time I change the oil
Im curious, how does the manual climate control thing work?
Like crap. Toyota didnt build it thats for sure.
@@MXguy95 😂 what respect it is a nissan
Nobody:
Jay: I’m not a fan of Nissan’s 😡
keep up wit da good vidyas
Your video won’t run all the way. Something went wrong and it goes black. Yours is the channel doing this.
Greg Diamond it plays through for me just fine... i don’t know what’s going on then
I can’t watch the video it says something went wrong
Hunter Himes just try again in a little bit. It must be RUclips or something
Thank you for responding. Love your videos look forward to them
Jay lemme come and work for like a week
Spinach Fox looking for an internship lol?
jay smart video im watchin!!!
Just whack the crap out of it it'll come off. Lol that's what I do when I work on my car I just whacked the crap out of things it always ends up working
Worked in this case lol
I love Red Baron pizza too.
What happened it quite playing the video
Try again? youtube was acting weird earlier
I did nothing can you do a cold start on the truck the diesel
Im curious why u dont like Nissan? :D
6:22 Jay it's been a while since I last saw you without beard and mustache lol
Nissan=Renault =shit.. Nissan was good up till the mid 90s..
“Guhrrross..” 🤣
Who is driveing it?
I would be willing to put money on a human
@@branzilla1722 that's what I was thinking
Bloody one-piece hub/bearing assemblies, just another excuse to rip the customer off royally...
Right? Nonetheless parts are fairly cheap and it went without a fight
@@MXguy95 Once you'd got the wheel off. Alloy wheels corroding to steel hubs is a real pain in the behind, it can really take some force to separate them and all it takes is a little copper grease to stop it happening...
Your sick? Should’ve worn a coat in the last video!
Looks like you are K swapping it lol
nahh, thats for something else lol
All the more reason for Jay to hate Nissan
Correct
Hey Jay, is there something wrong with your videos, or is it on my end? I can see about 2 minutes of it then it goes blank and says something went wrong. This is the second video that I’ve tried to watch.
Travis Warehime the same thing is happening to me
How ironic!!! I was eating a red Barron pizza and you mentioned that you like them. I wish I could have taken a picture. 🍕
Sir Sweetness coulda shared ! Lol
This is the second video of yours that gives me an error after a few seconds of watching it
The Horny Badger I’ve had a few people say that. I tried on multiple devices and didn’t have an issue... sorry
Shit I forgot about this thing
Its back!!! Hahaha 😂
keeping it clean
Sadly the vid wont play all the way thru, and i guess ill never know why its going in the garage
Dude the video keeps cutting out please fix
Ive tried everything in my power to correct the issue. And I cant change it. I can take the video down but thats about it.
I hate Nissan to they say they are all that but there are not.
Made in mother China😄😄😄 I wonder how long it will last.
Your titan is boring
And so is your profile pic of a hand!
Toyota Racing Development Supporter and so are the TRD
@@CarringtonHollister you mean like your fiat? Upload something real or nothing at all then talk.
@@CarringtonHollister Oh my god you singing was absolutely Hilarious too lol.
Toyota Racing Development Supporter troll