What order are the injectors in from the front of where the radiator as front does 1,2,3,4 from the front or it’s from the back? Thanks as they not numbered…cheers
I have micro-leaks around 1, 3 and 4. Do I do it myself or let mercedes handle it? I need 150 in tools that I don't have. Mercedes wants 580 for all four (plus eventualities) and it comes with 2 year guarantee. Their last 11 years of work has been top notch. They will also have pieces (eventualities) that I will not have if needed. I don't worry about unnecessary work. Its not their style. My love of mechanics says do it myself but the ease and security says that Mercedes is best route. Its a 4.9 star garage. 2023 is the year of revision of all worn parts.
@@bemugarage698 yes, I have the same engine with same problem, and I took out and fix the injectors, but the cover is in the same shape as your's on the video but im strugling with the valve cover
Hi, what can be the problem if i change the screw and the tightening ring, but after 1000km it starts leaking again. what can i do to keep it really sealed?
Hi IS it always hard to get the injectors out my engine is om 642 and mine start leakin to on cylindre 123456 so they are leakin always i drove 70.000 km with it i didnt got issues, so is this really important to fix ???
I have the problem on a Mercedes B180 model w245 but I cannot remove the dirty because it is hard. I found it is called the black death. How to remove?
Pity video didnt show cleaning out the bores and what was used plus showing the new washers on the injectors would be useful. Alot of Guys go to alot of trouble of doing videos but neglect the critical points ,, sorry for rant
What order are the injectors in from the front of where the radiator as front does 1,2,3,4 from the front or it’s from the back?
Thanks as they not numbered…cheers
The injector removal tool is brilliant. What are you screwing it onto? What's the thread? Thanks for the vid
How did you clean all the holes if you used a cutter what size
I have micro-leaks around 1, 3 and 4. Do I do it myself or let mercedes handle it? I need 150 in tools that I don't have. Mercedes wants 580 for all four (plus eventualities) and it comes with 2 year guarantee. Their last 11 years of work has been top notch. They will also have pieces (eventualities) that I will not have if needed. I don't worry about unnecessary work. Its not their style. My love of mechanics says do it myself but the ease and security says that Mercedes is best route. Its a 4.9 star garage. 2023 is the year of revision of all worn parts.
Hi i have same car but my injector is not leaking fuel but it is smoking from the injector area what can the problem be thanks
Hi mine is smoking from the injector area what can problem be
Did u put copper paste on injectors?
Hei, is there any torque value when tightening the injector lines at 17:00? Or just by hand until you feel its enough?
Trying to do this on my diesel bmw and the 3rd injector was so built up with carbon I can’t get the copper washer out and I’ve tried everything
So al you did was put new copper rings on it and new fuel lines?
yeah, and cleaned everything good
It does look so easy how you done them man.I just been quoted £2400 to replace all four of the injectors on my c class cdi 220 2010 ??
Hi do know what that is called next to the injectors crank breather or something thanks
That model is ok mine has difficulty starting when the tank is less that 50% full black smoke occasionaly and loss of power?
Hey mate, can you please show how do I take out the plastic cover of the head so I could clean it?
you mean the valve cover?
@@bemugarage698 yes, I have the same engine with same problem, and I took out and fix the injectors, but the cover is in the same shape as your's on the video but im strugling with the valve cover
Hi, what can be the problem if i change the screw and the tightening ring, but after 1000km it starts leaking again. what can i do to keep it really sealed?
did u clean everything really good? these mercedes always have some kind of problems with injectors
Посадочное место в колодцах форсунок надо фрезеровать.
I wouldnt ask this guy, there are a good few on utube with great communication
I thought you have to tighten it with x nm and then 90degrees or something like that? At least in the older 2.1l Mercedes the guide said that.
AFAIK the injectors lift themself off the engine block and start to leak. This could happen due to faulty injector too
Hi IS it always hard to get the injectors out my engine is om 642 and mine start leakin to on cylindre 123456 so they are leakin always i drove 70.000 km with it i didnt got issues, so is this really important to fix ???
omg . still running ? yes Very important to fix..look up black death
Great video and i like your injector puller... great idea
I have the problem on a Mercedes B180 model w245 but I cannot remove the dirty because it is hard. I found it is called the black death. How to remove?
warm up the car , take put injectors, plig holes, and just clean , screw driver chemicals, and so on , brushes…
Did you ecu code the injector after ?
How much on average does it cost to fix a small leak on a mercedes c220?
Ours cost £70.00
hi i changed the gasket but the water coming out of the rear bolt hole is malfunctioning how can i stop the water coming out
Try with wine, it will certainly stop water coming out.
how do you keep your hands so clean ?
i dont really know, u should see my hands today when i installed an engine in a6😂
Hi. I have same one I have headche. Black smoke. To much after I replace injctor seal
if headache the fumes comes into the cockpit
How long did this take?
few hours
What is the name of this engine
What did you use on the injectors before putting them back?
used coppar paste
But what solution did you clean up with ?
used chemicals and brushes and so on
Use new bolts as they are stretch bolts..big risk for snapping them off at that NM. i did not use new on one i changed, did not snap . lucky i guess
It is OM646?
Please fix my volvo bro😂
come to my shop and it will be done😝😂
Where is your shop
7nm+2×90°!!!!
7nm + 90 degree in this engine
@@bemugarage698 2x90
@@istvangut6010 nope
Slow down & talk, totally no help whatsoever with this robot
Agree - useless video.
Pity video didnt show cleaning out the bores and what was used plus showing the new washers on the injectors would be useful. Alot of Guys go to alot of trouble of doing videos but neglect the critical points ,, sorry for rant
Your accent 😢