How To Install P-Trap And Bathroom Sink Drain Piping | Easy Installation For Beginners!
HTML-код
- Опубликовано: 26 дек 2020
- ITEMS I USED ON THIS VIDEO:
- P-Trap Kit With Reducing Washer Adapter - amzn.to/2L2HXKD
- P-Trap Kit With Slip Joint Elbow - amzn.to/3mSSsgM
- Hand Held 10" Hack Saw - amzn.to/3puKooa
- Channellock Pliers - amzn.to/3hlqOb8
Hi Friends! I hope you find this How To Install P-Trap And Bathroom Sink Drain Piping Easy Installation For Beginners super helpful! Very Easy and Fast DIY that you can do in less than 30 minutes!
Please Subscribe To my Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@gmail.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
#Ptrap #Bathroomsinkdrain #Drainpiping #Sinkplumbing - Хобби
This was the very best video I found on RUclips and the entire internet for the job that had been plaguing me for hours. I needed an easy installation video for a beginner, and this one was the most helpful for my needs. Bravo! I was able to fully install a faucet and connect it to the sink drain for the first time, but only because of the careful and patience guidance. Thank you for being so helpful!!
Great video. I don't know anything about plumbing . This not only showed me what to do but that it probably isn't going to be as difficult as I thought. Famous last word for a DIY' er lol.
Fantastic video. Thank you!
Good work on that nut and straight pipe!
Great video you just solved an issue I was having thx my guy keep the vids coming watching from Phx Az
Great video. I don't know anything so this is really helpful. Thank you
Thank you for this video.
A must have for sure to keep the stink out, great video.
Thank you 🙏🏽 so much!
Thanks so much! On my way to the big box store!
Thank you for watching! 🙏🏽😊
Thank you! You saved us $400
Dude just a quick look at your install and i realized my trap was on backwards, duh. Quick fix though. Thanks so much.
Exactly what I am looking for. My p trap doesn't line up with drain with new floating vanity. This would solves it. The flexible P-trap is not up to code, but this method is. Thanks.
Great info. Thanks for sharing.
Glad I could be of help! 🙏🏽😊
Very nice. But what about old 50 yr old pipe from the wall?? Mine leaks- plastic to metal.
Thank you
Can I get a 90 degree for a 1 1/2 in pipe? Or do I use the 1 1/2 in pipe connector
Fantastic video!!!
Thank you 🙏🏽
I thought I had to use glue or grease? I guess not? Thank you SO MUCH for making this video 🙏❤️
So the fittings with a bevelled mating end do not need washers under the nut/collar ... perfect, that was my question!
TY!!!
You’re welcome! 🙏🏽👍🏽😊
Very good young man.
Thank you so much! 🙏🏽😊
@@FixThisHouse No problem.
I just changed my vanity top with sink. It was leaking from sink drain I put on new ptrap sink side stopped leaking but other side with fixed flange leaking when sink bowl is filled. I think alignment is off. Good video
Nice video, man. Question. I just installed a new sink and I noticed the sink drain hole and the p-trap do not line up. The previous owners did a bathroom remodel and used black pvc pipe. I’m assuming the holes aren’t lining up due to piping being customized for copper sinks they installed. I heard flex pipe is no good, so would I need to redo the entire piping in order to line up the holes?
I assume you are saying the pipe straight down from the sink hole does not line up with the drain hole in the wall. That's a common issue for one drain and they rarely match perfectly. If you have a kitchen sink with 2 drains it is always an issue. However, it's not a problem. The p trap itself is in 2 pieces for just that reason. Those 2 pieces can swivel into any position to create an angle that works for you. All that matters is that you have a p shape to trap water in the drain line and prevent gases or bugs from entering the house via the drain.
Thanks!
Thank you so much Kimberly! 🙏🏽😊
The pipe coming down from my new sink drain does not line up with the p trap. Is my only option to cut the pipe coming from the wall and add a small section? I hate to do this because the last plumber added a contraption with metal fasteners there! Thank you for any help. Would love to see another video with this sort of mismatch addressed.
Yes unfortunately will need to add a section of tubing and bring out the connection where it does match with the down tube from the sink.
Where did you get the pipe piece that you connected to the pipe that came with the faucet/sink? My P trap kit didn't have that 1 1/4 to 1 1/2 piece with it.
I did twin faucets in my owner's bathroom and for one reused my old one after cleaning, but I had to buy it separately for a the second one since the vertical drain extension was too short. They sell them in 6 or 12 inch lengths at Home Depot. I cut with a hacksaw to size, similar saw he had.
what if u had a cast iron pipe in the wall instead of the black plastik one? how u cut it? how u replace it?
Clean up the cut or hair will easily get caught and you will have to clean it out frequently.
The pitch of the pipes is way off. Water flows down not up. The black pipe needs to be pitched higher which means cutting more off the downward pipe from the sink.
The downward pipe from the sink, as in the pipe attached to the sink needs to be cut?
@@AlkalineInsides Yes. Shortening that pipe slightly will angle the black pipe upwards slightly so water will slope towards the wall.
PVC to ABS?
1:07 - They're called slip joint nuts or lock nuts
Hello I came across this video.. Quick question, candle wax spilled in the sink and it stopped up, can I remove the pipes this way and try to remove the wax?
That is possible if you have this type of locking system. 👍🏽😊
No matter what I do the 90 degree with built in nut and beveled end, keeps leaking where it meets the p trap. I’ve tried taking everything apart and slowly matching up, but it won’t stop leaking. Any ideas?
plumbers putty
You could also try Teflon tape or thread sealant. I like Tru-Blu
Hi how I would know what size pipe I have to buy thanks
Hi! 1-1/2 is what is commonly used in the United States for sink drainage 👍🏽😊
@@FixThisHouse Gracias. Have nice weekend
@@FixThisHouse thany
1 1/2" for kitchen sinks. 1 1/4" for bathrooms.
@@kennywonderley5883 so how did this guy use 1 1/2 for this video?
Why did u not put any pipe glue/dope/lube?
Hi! I don’t put pipe dope on p-trap because the one I used uses a slip nut. It comes with a rubber gasket on the inside that seals the joints when tightened. You only topically use pipe dope for pipes under pressure. P-traps are not under pressure. These joints need to be able to be disconnected with slip nuts in order to be disassembled quickly incase you need to unclog the p trap or replace it for convenience.
Those joints are made by compression via. a compression washer or the molded tapered end of the J-tube portion of the p-trap assembly, no Teflon tape or plumbers putty required.
What’s that part number
I have a bathroom sink drain pipe of 1 1/4 but the p trap & wall pipe is 1/1/2, now what do I do, no wonder it leaked?
Hi! I would get a 1 1/4 to 1 1/2 coupling trap adaptor. They have A brand called Keeney on Home Depot or Lowe’s that carry those transition pieces 👍🏽😊
@@FixThisHouse awesome, appreciate it!
All you really need is to replace the current washer where the top of the P trap meets with your pop up assembly with a 1 1/2"-1 1/4" reducing washer if you haven't gotten it already.
You are not supposed to use pliers or wrenches. Hand tighten. I’d you use pliers or a wrench you should only do 1/4 turn after you have hand tightened.
Sometimes it’s not enough if you’re a woman or they get stuck and out dexterity/coordination is generally less precise.
Other common mistake is 1-1/4 inch pipe is for bathroom
1-1/2 is for kitchen people get the 1/2 often an mix them up an wonder why they don’t fit
PVC to ABS to PVC....
The pipe threads should be wrapped with teflon tape for a more secure connection.
Those joints are made by compression via. a compression washer or the molded tapered end of the J-tube portion of the p-trap assembly, no teflon tape required.
you should teflon tape all threads, sand bur's off pipe you cut or it grabs hair etc..
Thank you for the tip!
For a professional installation you do not Teflon a p trap
@@slickrick3732 gaskets = no teflon needed.
If it wasnt for pluming i would have a headache
Is it called a p trap because you’re supposed to urinate in it?
😂
I cringed when I saw the flexi pipe
People will charge you hundreds of dollars to replace your vanity. $250 or more.
You’ll fail any inspection
Not in this economy.
Also insurance wont pay if it floods.
This will leak ! Guaranteed
Been months now. No leak yet 😁
Why would it leak?
Tried it, but the nut doesn't get tight, and the pipe pops out.