I'm having the same problem with my 2009 mazda 6. The front right turn signal failed and welded itself inside the connector. I have to break the bulb in the peices and scrape it out. Now the contacts are bent and corroded. I might be able to find a replacement for it but I need something right away for work. ( I drive for a living). So I'm going to bend the contacts out so there's a good connections and the bulb feels tight and slather some dielectric grease on it.
My turn signal isn't even working... with new bulbs and it's my daytime running lights that are blinking for my turn signals. I'm so confused. I had crap after market headlights when I purchased the car and got stock. And this is the problem I have.
I bought a new socket holder but I'm having trouble getting it to go back in properly and when i finnaly do it still won't work. The rear light still blinks fast but the front does nothing. Is there a certain way it's supposed to go back in? Was really hoping this video was going to show how you reinstalled it. I feel dumb because I'm sure it's quite simple. I spent nearly more time trying to figure this out than replacing the starter in the same car smh.
Did you ever figure this out? I am currently having the same issue. Bought a brand new bulb socket, I put it in and the blinker still doesn’t work. I even tried swapping out the old socket from the other side, and when I did that, the blinker worked again. But when I put the brand new socket on either side, no luck.
I have the same problem, my whole right side inside on the green arrow and the outside front and back don’t work, if you find a solution please let me know
The 2 bottom hinges gold color from the opposite side of the bulb I opened them a bit wide to make better contact and it worked
I've been having this problem for so long. THANK YOU SO MUCH!!!
Thank you so MUCH! I'm going to try this fix tomorrow!
Thank you legend. this was the exact problem i had
I will check that. Thanks so much!
I'm having the same problem with my 2009 mazda 6. The front right turn signal failed and welded itself inside the connector. I have to break the bulb in the peices and scrape it out. Now the contacts are bent and corroded. I might be able to find a replacement for it but I need something right away for work. ( I drive for a living). So I'm going to bend the contacts out so there's a good connections and the bulb feels tight and slather some dielectric grease on it.
Yo this works thank you so much!
Dude thanks so much man
Helpful
Hi thanks for uploading having trouble the same way you did with the right side back turn signal light. What can I do?
Take it a apart and check it out.
Mine is left side signal light burned out. How do you do that? Thanks!
Hey how you have side makers on this bumper?
3 horas despues aun no logro ponerlos de nuevo
I’ve been having this problem imma try to buy a new socket and see what happens
i keep forgetting its this simple
My turn signal isn't even working... with new bulbs and it's my daytime running lights that are blinking for my turn signals. I'm so confused. I had crap after market headlights when I purchased the car and got stock. And this is the problem I have.
Thanks!!!
Hey! Were all bulps on the side not working?
I bought a new socket holder but I'm having trouble getting it to go back in properly and when i finnaly do it still won't work. The rear light still blinks fast but the front does nothing. Is there a certain way it's supposed to go back in? Was really hoping this video was going to show how you reinstalled it. I feel dumb because I'm sure it's quite simple. I spent nearly more time trying to figure this out than replacing the starter in the same car smh.
It sounds like you are doing everything right, but it’s hard to know what’s wrong when I can’t examine it. Don’t give up. Good luck
Did you ever figure this out? I am currently having the same issue. Bought a brand new bulb socket, I put it in and the blinker still doesn’t work. I even tried swapping out the old socket from the other side, and when I did that, the blinker worked again. But when I put the brand new socket on either side, no luck.
I have have same problem thank you so much
Cheers!
The left blinker is super hard to get to so much plastic crap the right is way easier.
👍👍👍👍👍
What if the front and back lights don’t blink ? not even inside on the cluster
Relay possibly. Cheap enough to try.
Was a fuse. Now my back ones work but not the front. I checked this
I have the same problem, my whole right side inside on the green arrow and the outside front and back don’t work, if you find a solution please let me know
@@PSJ_32 check your fuses ones probably blown out
@@lumurumba bcm Controls it
Did you ever get it working cause I’m having the same issue.
TheKyleseikel Yes
lumurumba so that worked?
@@TheKyleseikel Again... Yes
I think my bcm is going
I can see that you only do the easiest side of the car. Try doing the left side you goose.
It's stunning how ungrateful and entitled some folks can be.
@@lumurumba Also the driver side is even easier to get the holder out than the passenger. What a dolt.