As a Christian, I can't help but express my gratitude for those provide exceptional insight for the benefit of others. What makes this how-to stand out is the pointer on determining if you have day time running lights and if you do, how the high beams are controlled.
excellent video, finally I might get closer to sorting out my low beams. My left one would sometimes not come on then after a couple more months both started intermittently working. It's got to the point where they sometimes flicker for a bit then not work. Think that as they sometimes work that the bulbs are still ok, and if on seperate fuses it must be a fault with a common ground as it's affecting both lights equally. Will be swapping the relays to see if it solves the issue. Thanks for this info, much appreciated.
My low beams on my 2007 Mazda 6 are very dim and blow out multiple times/year. Is this a bad relay? Ground? I’m getting tired of replacing bulbs. Please advise
Thanks for the video very helpful indeed, question my lights are working fine except for the h3 bulbs on low beam the outer low beams work but the inner bulbs don't, any suggestions I've replaced the bulbs still nothing fuses seem ok, haven't change the relay yet either for low beam.
Got a 2006 mazda 6 2.3 and when lights are on if i try and use right or left turn signal the hazards come on? Also if i use the key fob then the hazards come on when locked. Anyone else ever encounter this and if so how do you fix it ? Please. All work good but i can't drive at night or in the rain like this! Car runs perfect with only 94,000 miles in 2024 just this issue.
I put 2007 hid headlights into my 08 Mazda 6 but my driver side was dead and I checked the fuses n they are fine. I put the hid headlight in and I had the same problem. I swapped the fuses and it still powered my passenger side. I bought new bulbs and still doesn’t work. It’s only my left low beam. I have blinkers, high beams and park lights
I have a 2005 mazda 6, the hazard lights won't go off ...even when the car is off. It seems to be triggered by the right turn switch. No, button doesn't do anything. Lights are all OK. Now what. If I take out the fuse it goes out...red 10 amp.
I have a 2008 Mazda 6 2.3L, all my high beam lights work but when i switch to low beam one will not turn on I changed the fuse still nothing. Please help if you have had this problem and were able to find fix, anyone
So I changed the fuses and the relay still didn’t work, gave up and ended taking my car to a mechanic who specializes in electric and the problem was a “ground” issue charged me $20
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
You saved my life I was about to go to a mechanic for the life of me I couldn’t figure it out
As a Christian, I can't help but express my gratitude for those provide exceptional insight for the benefit of others. What makes this how-to stand out is the pointer on determining if you have day time running lights and if you do, how the high beams are controlled.
Nothing to do with your religion. If anything, it actually shows your ignorance.
excellent video, finally I might get closer to sorting out my low beams. My left one would sometimes not come on then after a couple more months both started intermittently working. It's got to the point where they sometimes flicker for a bit then not work. Think that as they sometimes work that the bulbs are still ok, and if on seperate fuses it must be a fault with a common ground as it's affecting both lights equally. Will be swapping the relays to see if it solves the issue. Thanks for this info, much appreciated.
Lll
did it work? same problem
What about turning lights?
Thank you this video is very helpful 👍👍
Very nice💥
lovely video
My low beams on my 2007 Mazda 6 are very dim and blow out multiple times/year. Is this a bad relay? Ground? I’m getting tired of replacing bulbs. Please advise
Thanks for the video very helpful indeed, question my lights are working fine except for the h3 bulbs on low beam the outer low beams work but the inner bulbs don't, any suggestions I've replaced the bulbs still nothing fuses seem ok, haven't change the relay yet either for low beam.
Got a 2006 mazda 6 2.3 and when lights are on if i try and use right or left turn signal the hazards come on? Also if i use the key fob then the hazards come on when locked. Anyone else ever encounter this and if so how do you fix it ? Please. All work good but i can't drive at night or in the rain like this! Car runs perfect with only 94,000 miles in 2024 just this issue.
Great, It help me alot. Thanks
My passenger side low beam on a 09 Mazda 6 I shots off and then on again the driver side is on normally, please guide me !
I put 2007 hid headlights into my 08 Mazda 6 but my driver side was dead and I checked the fuses n they are fine. I put the hid headlight in and I had the same problem. I swapped the fuses and it still powered my passenger side. I bought new bulbs and still doesn’t work. It’s only my left low beam. I have blinkers, high beams and park lights
Thanks for the video
HAVING A PROBLEM WITH MY HIGH BEAM WIRING, PLEASE ASSIST WHICH COLOUR ARE THE WIRING M6 2008 MODEL
I have a 2005 mazda 6, the hazard lights won't go off ...even when the car is off. It seems to be triggered by the right turn switch.
No, button doesn't do anything. Lights are all OK. Now what.
If I take out the fuse it goes out...red 10 amp.
Having a problem with my light wiring M6 2004 model same fues box.
How to get the abs relay its be side the blue one its hard to get out
I have a 2008 Mazda 6 2.3L, all my high beam lights work but when i switch to low beam one will not turn on I changed the fuse still nothing. Please help if you have had this problem and were able to find fix, anyone
any news about your light? I have exactly same problen
So I changed the fuses and the relay still didn’t work, gave up and ended taking my car to a mechanic who specializes in electric and the problem was a “ground” issue charged me $20
Having exactly the same problem right now and hoping like hell mines just a quick and cheap "ground" issue 🤦🏼♀️
This video did fuck all
Hey what if the lights dont come on. On command does that mean the fuse is bad