Hi Shravan. its an excellent information about column size for each floor. Can you also share your knowledge of size of iron rods for each of floor. For example for G+2+penthouse along with column size 12inches , 14inches what should be the mm of rods to be used
Hi, brother i am working now in site supervision field, iam interested to change in designing carrier , is there any online courses you can suggest to lern designing using e tabs or any other
Let's say you have a rectangular building, the major axis of the column will run parallel to the transverse or short side of the building. This way the major axis of the column faces the direction of lateral loads like winds or seismic. After this major arrangement, architectural considerations will make you change a few of them that's all.
Dear Sir Myself a senior civil engineer with over 35 yrs field diverse experience.Please differentiate between pro & coins of different design software in a TABULAR FORM and your personal experience in using various software and recommendations thereof.Thanks
Can we change the column sizes while moving above stories considering economic design or it is preferable to keep column size constant and reducing the reinforcement percentage?
Sir, for G+2 residential building I consider 350*350 mm column, but bar area coming up to 2700 mm2. and unfortunately higher bar in upper floor. Please suggest, how to solve.
sir plz reply karna humble request. mera 1100sqft ka ghar hai. bina engineer recommendation se banaya gya hai. 1.total 9 pillers. 2.3 storeys. 3. all 8 pillers 12x10 ,only middle piller 12x16. Sir is it ok? ya strength kam ho gya hai?
Sir the video is great and the information is valuable but what do you mean by “it’s my personal experience, not accurate values “ .. you mean to say these values can’t be used in real life constructions? Then what is the point of you sharing these values if they’re not accurate and can’t be used in real life construction? Please explain
Suppose we roll steel than use box type steel minced suppose columns size 12"×12" Whiteman plaster in to between under 10"×10" 2"thikness box 3 parts in to againe 10 feet hight but column 's both side 1 feet or two feet distant put 1 mm to up down we can be attach other following column in side ither out side we are get ground to last floor in perfect angle constriction. And save time steel road do it streat for also put ring fixing time saved also side ply for wood can use other where.and slape for use in plastic plat 6 mm thikness.
Kindly give any calculation of thumb rule to arrive preliminary size of rcc column for any storey building. Load= plinth area of slab area x no. of storey x thumb rule for load/m^2. After that using formula given in IS456-2000 Pu=0.40fck Ac+ 0.67 fy Asc. By assuming percentage of steel from 1 to 2% and assuming grade of concrete and steel grade , Ag gross area of column area will be arrived. By assuming square or rectangular column dimension of column wi be arrived. As a thumb re we may assume 10 to 20 kn/m^2 may be consider as thumb rule Normall we adopt 15 Kn/m^2 is consider for design. Like that kindly give some guidance to arrive size of rcc column from your field experience. V.M.Rajan.
Sir Mere building mai column span maximum 11 ft hai...all colum size 10 inch * 10 inch hai...steel 16 mm 4 nos & 12 mm 2 nos hai...kya mai 3 storey buildings bana sakta hun....now it's G+1.Soil is very good
Can we increase length of column instead of width like 600 x 600 to 300 x 900 mm As I had worked as site engineer in a project of 21 floor but there I had not seen column width 700 x 700 instead the column length was big And they had reduced the size of column as floor increased like from GL to 10th and from the 10 the 15 the floor different small size so on
Dear Sir hum ne main column per 6 bar 12mm aur ring 7 inches per hae aur column space almost 9 feet hae residential two story building hae koi tension wali bat to ni hae pls guide me plenth beam ke nechay walls ni hain
Agr building ka load 1000kN aa rha ho aur plan me 10 columns ho to every column ki load carrying capacity kitni asume krke design krenge 1000kN or 100 KN for each column ?????
I have G+2 home which has 9"*18" column and used 16mm-2 qty and 12 mm -2qty steel size. And distance between two column is 13 feet then it is stable for load?
I have planned to construct two separate rooms like 20*10 ( ground floor with 10*14 room size at first floor) & 22.5*10 (only ground floor) . My engineer suggested RCC is as follows. Pls tell it correct or not. Basement level of 22.5*10 is 2 feet less than 20*10 room 1. For 20*10 - 6 columns of 12*4 with 8mm stirr up of 7 inch c/c - four at each corner and remaining two at spacing of 8 feet at one end and 11 ft at other end. Plinth beam with 1.5 feet height and 9*9 (l*b). Ceiling height is 10 feet. Planned tie beam at below windows (2.5 feet) and lintel (7 feet) of 6 inch rcc 2. For 22.5*10 - 6 columns of 12*4 with 8mm stirr up of 7 inch c/c - four at each corner and remaining two at spacing of 10 feet at one end and 10 ft at other end. Plinth beam with 1 feet height and 9*9 (l*b). Ceiling height is 12 feet. Planned tie beam at below windows (4 feet) and lintel ( 8 feet) with 6 inch rcc And join the both room in ceiling and both room in 90 degree position to each other
Square pipe box square columns and raound column s for circle box in size by size supposed hight growth about tree floor box thikness 3 mm ,9 floor for 4 mm ,15 floor for 6 mm such can do it ?
Hi bro plz reply my question my house span between two columns 19 feetlength, wedth 14 feet . Column size is 9/15 with 6 bars of 16mm rectangler shape.and we make all walls before slab with size of 9”. And we put 12mm bars concealed beams . Total slab area is 45*36 feet total colums 9. Middle columns lean wall 14 “ It is safe or not plz reply bro
G+2 house hona wala hai 1200 square feet ka and 15 pillers horaha hai hamara... And hamare mistrine 10×10 ka piller banaya hai... Yeh thik hoi or kuch galat ho raha hai... Mera papa ka pure zindagi ki kamai is ghar pe lagne wali hai... Please reply krna thori help ho jayegi bhaiya please
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
Hi Shravan. its an excellent information about column size for each floor. Can you also share your knowledge of size of iron rods for each of floor. For example for G+2+penthouse along with column size 12inches , 14inches what should be the mm of rods to be used
thank you for speaking english
Why?
Hi Shravan. its an excellent information about column size for each floor. Can u share how to design coloumn for G+1 RCC residential building
Hi, brother i am working now in site supervision field, iam interested to change in designing carrier , is there any online courses you can suggest to lern designing using e tabs or any other
I will start online course by May or June I will update that soon in our channel stay tune
If G+1 column Size is then Plinth Beam Size will be ??
The size of column also depend upon the distance between either sides of the columns, what reference are you giving this speech upon?
Can you explain about placement of column and orientation of columns with respect to major and minor axis of the beam .
Let's say you have a rectangular building, the major axis of the column will run parallel to the transverse or short side of the building.
This way the major axis of the column faces the direction of lateral loads like winds or seismic.
After this major arrangement, architectural considerations will make you change a few of them that's all.
Dear Sir
Myself a senior civil engineer with over 35 yrs field diverse experience.Please differentiate between pro & coins of different design software in a TABULAR FORM and your personal experience in using various software and recommendations thereof.Thanks
Definitely Ravi sir I will make it 💪🏻
Thanks
its better to retire
Can you clarify If Iam building G+ 1 now and in future if I want to expand till 4 floors Can you let me know Column Sizes Thanks
Hello sir , how to design eccentric footing foundation in staad pro..?
Sir, can i reduce column size after finishing 3rd floor or 4th floor?
NB: the building is design for 8 floors.
yes u can
Sir, I did complete building in etabs , while run analysis IAM not getting displacement function in the bottom of scroll ball
can u send me screen shot to my mail
Can we change the column sizes while moving above stories considering economic design or it is preferable to keep column size constant and reducing the reinforcement percentage?
Yes brother I was explained example in video please watch completely
Please tell is tata tiscon steel good for house construction??
Bhai jaise jaise building bante jaye column ka size km kr skte hai???
Bro could you explain about how many bars will provide for each size of column please explain
I used 6 piece 16 mm bar and column size 250 x 300. Can I build G+2 with this specification
try to use 8 bars 6 bars with 16mm is only enough for G+1
Am I correct that he is referring to concrete roof, walls, etc..?
Sir, for G+2 residential building I consider 350*350 mm column, but bar area coming up to 2700 mm2. and unfortunately higher bar in upper floor. Please suggest, how to solve.
For residential building the coloumn sizes will obstruct movement so can we convert it to max width of 12"X as required.
Are you a qualified structure engineer?
sir plz reply karna humble request.
mera 1100sqft ka ghar hai. bina engineer recommendation se banaya gya hai.
1.total 9 pillers.
2.3 storeys.
3. all 8 pillers 12x10 ,only middle piller 12x16.
Sir is it ok? ya strength kam ho gya hai?
Brother, for the 9x9 inches ground column, what is the maximum distance spacing between 2 columns? thank you
Alreay made a video on it please check in playlist yar
Maximum distance is 3 to 5 meters
@@drsteviejasengnsangma8739 thank you sir
Thanks brother, nice information
Intelligent boy, thanks for ur explanation
Sir the video is great and the information is valuable but what do you mean by “it’s my personal experience, not accurate values “ .. you mean to say these values can’t be used in real life constructions? Then what is the point of you sharing these values if they’re not accurate and can’t be used in real life construction? Please explain
Suppose we roll steel than use box type steel minced suppose columns size 12"×12" Whiteman plaster in to between under 10"×10" 2"thikness box 3 parts in to againe 10 feet hight but column 's both side 1 feet or two feet distant put 1 mm to up down we can be attach other following column in side ither out side we are get ground to last floor in perfect angle constriction. And save time steel road do it streat for also put ring fixing time saved also side ply for wood can use other where.and slape for use in plastic plat 6 mm thikness.
Sir please tell us the minimum distance between two column?
Kindly give any calculation of thumb rule to arrive preliminary size of rcc column for any storey building. Load= plinth area of slab area x no. of storey x thumb rule for load/m^2. After that using formula given in IS456-2000
Pu=0.40fck Ac+ 0.67 fy Asc. By assuming percentage of steel from 1 to 2% and assuming grade of concrete and steel grade , Ag gross area of column area will be arrived. By assuming square or rectangular column dimension of column wi be arrived. As a thumb re we may assume 10 to 20 kn/m^2 may be consider as thumb rule Normall we adopt 15 Kn/m^2 is consider for design. Like that kindly give some guidance to arrive size of rcc column from your field experience.
V.M.Rajan.
Good job Amigo!!! Muy bien trabajo!!! Saludos desde Las Terrenas RD.
Thank you
Good explanation and very useful.
Thank you 😊
Hi bro I need the design of the foundation from start video
Already uploaded in staad folder plz check
THANKYOU SIR. IT IS HELPFUL.
Most welcome
Sir I have 5000 sqft area how many floor I can build with a unground and ground floor
Sir Mere building mai column span maximum 11 ft hai...all colum size 10 inch * 10 inch hai...steel 16 mm 4 nos & 12 mm 2 nos hai...kya mai 3 storey buildings bana sakta hun....now it's G+1.Soil is very good
Very helpful info. This channel is my favorite keep teaching pls engr.
I really appreciate
Thank you
I mean to say G4 you said on mm for G3 pls correct it
Great content. Thanks
I want to join as a member but can u first answer my query.is 10x14 good for g+4 residential 3bhk 1600sqft building
for G + 9 all floors' columns should be of the same size?
yes but you have to consider design considerations
Good information sir
Thanks
Add pictures and video footages when u talk regarding particular column sizes
ok
9 by 24 inch ka collum kitna g plus uthayega plzz riply me
Thankyou so much sir . Very helpful information 👍👌
Can we increase length of column instead of width like 600 x 600 to 300 x 900 mm
As I had worked as site engineer in a project of 21 floor but there I had not seen column width 700 x 700 instead the column length was big
And they had reduced the size of column as floor increased like from GL to 10th and from the 10 the 15 the floor different small size so on
Also add required Bars needed for those column size.
Dear Sir hum ne main column per 6 bar 12mm aur ring 7 inches per hae aur column space almost 9 feet hae residential two story building hae koi tension wali bat to ni hae pls guide me plenth beam ke nechay walls ni hain
please discribe about using steel as per piller.
Please watch videos in our channel i was already uploaded that videos
is it the same for residential constructio in hilly areas?
thank you sir for the information
Sir mera house 3 rd floor....g+2.....550 sft a...calom 9ta ....10/10...r 16 mm 4 pic kora ....khuch prblm hoga sir ...plz anrs??
Sir column size position and orientation ke barene vdo banaiye. Facing of large column
Already uploaded
ruclips.net/video/OzSQX49fWqo/видео.html
Sir what can you suggest regarding the column size and its distance to each other for a 40 storey hign rise building?
Thanks you for sharing your experience and knowledge 🙏🙏🙏
Thank you 😊
Hi sire i have column size 35×35 for G and G+1 FOR G+2 i have reduced the size to 30×30 can i added a G+3 ???
Please can you explain how to install the columns
what about the span ????
column size according to the spans ????????????????????
Agr building ka load 1000kN aa rha ho aur plan me 10 columns ho to every column ki load carrying capacity kitni asume krke design krenge 1000kN or 100 KN for each column ?????
Best video dear vai
Thank you Sir
Sir, from what story level wind load and earthquake load should consideration.
Sir what will be the span?
Superb
Thanks 🤗
I have G+2 home which has 9"*18" column and used 16mm-2 qty and 12 mm -2qty steel size. And distance between two column is 13 feet then it is stable for load?
Collumm size 9'×12 and 9'×15
12 mm bar nos10 and 12 mm bar nos 12 for G+2 building
Land is hard rock,Is it ok ?? Please suggest 🙏
Done
Are these sizes are standard?
How about the distance of column to column?
I have planned to construct two separate rooms like 20*10 ( ground floor with 10*14 room size at first floor) & 22.5*10 (only ground floor) . My engineer suggested RCC is as follows. Pls tell it correct or not. Basement level of 22.5*10 is 2 feet less than 20*10 room
1. For 20*10 - 6 columns of 12*4 with 8mm stirr up of 7 inch c/c - four at each corner and remaining two at spacing of 8 feet at one end and 11 ft at other end. Plinth beam with 1.5 feet height and 9*9 (l*b). Ceiling height is 10 feet. Planned tie beam at below windows (2.5 feet) and lintel (7 feet) of 6 inch rcc
2. For 22.5*10 - 6 columns of 12*4 with 8mm stirr up of 7 inch c/c - four at each corner and remaining two at spacing of 10 feet at one end and 10 ft at other end. Plinth beam with 1 feet height and 9*9 (l*b). Ceiling height is 12 feet. Planned tie beam at below windows (4 feet) and lintel ( 8 feet) with 6 inch rcc
And join the both room in ceiling and both room in 90 degree position to each other
Sir please provide soft copy for design steps of multi story buildings...
Square pipe box square columns and raound column s for circle box in size by size supposed hight growth about tree floor box thikness 3 mm ,9 floor for 4 mm ,15 floor for 6 mm such can do it ?
Hi bro plz reply my question my house span between two columns 19 feetlength, wedth 14 feet . Column size is 9/15 with 6 bars of 16mm rectangler shape.and we make all walls before slab with size of 9”. And we put 12mm bars concealed beams . Total slab area is 45*36 feet total colums 9.
Middle columns lean wall 14 “
It is safe or not plz reply bro
Only single story G+0
G+2 house hona wala hai 1200 square feet ka and 15 pillers horaha hai hamara... And hamare mistrine 10×10 ka piller banaya hai... Yeh thik hoi or kuch galat ho raha hai... Mera papa ka pure zindagi ki kamai is ghar pe lagne wali hai... Please reply krna thori help ho jayegi bhaiya please
G + 1
Column size 6-15/. 6/18 are ok or not
Can v use 9x15" collums size
You can depending upon the consideration of building
hi brother can tell me G+10 building special shaped column size?c/c distance?
I have seen many using 200mm as minimum dimension .. Is it okay
What 200mm 😳 for which projects
@@civilengineeringbyshravan9596 column size 200 x 300... For g+2 building.. Not all the columns... Residential building..
@@civilengineeringbyshravan9596 200 taken to avoid projection of column from wall..since the wall thickness is 20cm.
how can I cont. you regarding RCC construction like slab col. beams
Interesting
Thank you
Sir 400 gajalo G+3+B+ bedroom house much estimation total
Dear sir 6/12 inch piller how many floors load this piller
Pls replay
Thx
Any time
G+2 residential building ke Liye ground floor beam ke liye kitna mm ka rod use kare.
Beam size 250× 400 mm please reply
Spam b bta do . Is it safe 12"x18" G+5 for 35 feet spam
I have designed g+3 with beam width 250 so what should be the dimensions of columns?
G+2 story 12"×12" steel 12mm 6 bar ok or need more
try to use at least 2 16mm size bars
@@civilengineeringbyshravan9596 thanks sir
Can we increase ground column 9x12 size in first floor to 9x 15 or 9x 18
No u can’t do that
@@civilengineeringbyshravan9596 than what would be the solution for the column where they are not aligned in straight line
g+10 k liye konte size lagenge column ko
Can a diploma civil engineers learn Staddpro?
Any body can learn Staad Pro software bro
G+2 house 10×10 is ok or not
no
What is minimum or maximum distance between 2 colum .
i already did a video on it my dear friend arun kumar please check it in play list
Thank you sir, It was really interesting and would you tell me please the difference between 3B+G+3 and 3G+B+3. I will be very thankful!
Great
what about span length?
Sir. Please do design with excel
What should be reinforcement for 18 by 18 column size?
9×15 inch column reinforcement is it ok
G+3
16 12 12 16
* * * *
12 * * 12
* * * *
16 12 12 16
Can we take 9×15
Thanks bro
Welcome
On which code your saying
Number of the code
Very nice knowledge
Thanks
What is size of beams of the various story buildings