dyson brush bar not spinning v6 v7 v8 fixed in minutes
HTML-код
- Опубликовано: 24 авг 2024
- dyson brush bar motor head not turning
on the v6 v7 v8 hand held?
I show you how to fix it and get the brush bar spinning again.
this is the same for all the dyson models with a brush bar.
hope this helps you out and fixes your issues.
get new brush bars and parts here.
dyson v6 original brush bar replacement
amzn.to/3hww6Rq
original v6 brush head
amzn.to/3natDx8
cheap v6 brush bar
amzn.to/2JCoEaX
cheap v7 brush bar
amzn.to/3pHs6k0
dyson v8 brush bar
amzn.to/3rFKtHP
I don't get paid for the video but do get paid for completed purchases via the links above.
thank you for your support.
#dyson
#dysonv6
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
Amazing, thanks so much, I did everything as you said,working brilliant !!
Thank you so much for this video. It is gold. I knew about getting the hair out of the brush and at the sides but didn't know about removing the bin to check the electrical connections (which I found to be very clean). I also didn't know that the grey twirly bit at the side could be removed. I went and got a screwdriver kit with a T8 head (very helpful that you told us which one!). Lo and behold, tightly coiled hair. I removed it and my Dyson is back to its best. Note: the troubleshooting instructions on the Dyson website don't tell you about this step!
I was beyond frustrated with my Dyson. It's only a year old!!! I'm proud to say thanks to you It's fixed and is working great again.Truly appreciate your videos..👊👍
Cheers for making this video - I had cleaned out the hair along the brush bar so many times, but it was still failing to rotate. It would spin for a half-second, then just stop - a built-in measure meant to stop the brushes from getting things jammed, I imagine.
When I saw in your video that you could remove the twisty plastic part using a T8, I broke out the toolkit and boom: years of hair clogged underneath. Some of it had fused into a semi-solid ring, with a fair amount of disintegrated matter as well. The little metal disc fell out when I pulled the clump free, but it slotted back in nicely. Everything back together and it spun up first time, no issues.
Thanks again - saved us spending on a replacement part, or even a new hoover!
Thank you... Dyson told me the motor burnt up and wanted $225 for a replacement head... It was the last step of the video that fixed my problem...
You are a legend!!! Had a 2nd hand one off my sister but the brush bar didn't work! Cleaned everything after watching one of your video's but after watching this one I now have a brush bar that works........thank you pal! Guys like you probably don't realise the good you do in saving people money by fixing and cleaning they can do with a little help so thanks million 👍
glad to help
Clearing the connection behind the debris tank was a winner for me. Thank you for your instructions.
Thanks! This is extremely helpful. The video was clear, to the point and spot on. Five minutes and 25 seconds . . . wow. No fillers, no wasted time. You rock!!
You're welcome!
Thank you ! you just saved me from going out and buying another one!!!! Did exactly as directed in your video! There was so much crud inside the joint where the brush was just like your video! Now!!!!! Its like I have a new Dyson! To get the right tools for the job I bought them on Amazon! Cheers to you!
you are welcome
Thank you for this video! My vacuum has been malfunctioning for months. I’ve watched other cleaning videos and none of them had me take off the little rotating part inside the bar. That did the trick! Thank you!! Now I don’t have to buy a new vacuum!
Yes that was also our issue. So much hair
Dyson told me my Motörhead was just bad. Your fix solved the problem. God bless RUclips!!!! Many thanks
Great video. My SV06 brush bar had no current to it. Your opening advice on removing the bin and cleaning the contacts was the answer to the problem. Thankyou
I would have never found that bit behind the T8 screw without you. That was the hidden issue for me. Thank you so much for this very helpful video!
You saved me from buying a new vaccum I’m eternally grateful! I found a plastic lid stuck in the brush head. Thanks!
Thank you, I'd been doing everything else in your video bar unscrewing and taking out the black liquorice looking thing. I did that and found a solid circle of hair! Now it works like new, again thank you for taking the time to share your knowledge 👍
glad it helped
Thanks! Never knew hair could accumulate behind the part the T8 screw holds down. Cleaned and added some silicone grease with PTFE and now everything is working perfect!
This is amazing. Did not know that little piece can be removed at 4:10. Pulled out all the hair and it’s spinning stronger than ever. You just saved me hundreds of dollars as I was close to giving up and buying a new one!!
Thank you so much for sharing this. I thought I was going to have to get a new one. This is exactly what the problem was. I couldn’t believe my eyes when the powerhead worked. Thank you 🙏
That second clog of hair *inside* the inner end of the brush bar mechanism housing, necessitating taking the whole thing apart with a screwdriver - is a major, major design flaw.
It should come with that skinny screw driver
Thanks to you I finally fixed the problem after several other videos and a series of failed attempts to find the problem.
Thank you! I knew I had to clean under the mechanism that makes the roller turn and couldn’t figure out how to get down there! You just saved me so much money! ❤😊
I've been struggling to get my Dyson working and after watching this video and a quick flick with a fine paintbrush and it's as good as new. Cheers!
Thanks so much. This happened to me this afternoon and I was worried it had finally given up. Dust in the connections was exactly the issue.
Just watched this video and worked perfectly. The amount of hair behind the screw was incredible. Thanks a lot 👍🏻
glad it helped.
Me too! Who knew my Dyson could come apart like that for cleaning! Many thanks
Thanks Bro! You saved me from buying a new vacuum......I never thought hair could get caught behind the spindle! I would just add a bit of lubricant before reattaching the spindle
thanks for that! my bearing was all blocked up, even under the bearing cover! i cleaned it all up like you instructed and now it spins
Brilliant thanks, just used this to fix a free old non working Dyson that I’d been given which will now be my car vacuum
Excellent video! I'd been through the brush cleaning, the connectors on top and bottom of the tube but never knew about the connectors on the dust container. Thanks for the post.
Thank you. It gave me the idea of spraying some switch cleaner on the contacts along the way. Let it dry. Attached, detached each point a couple of times and problem solved.
I was going to throw mine out, but these handheld vacuums are impossible to find and I love mine! with your video I was able to fix my vacuum, so thank you thank you thank you!!!!
thanks! Especially for mentioning the size of the torx screw as it was very snug and if I had used the wrong sized screw I would have striped it.
Fixed my brush bar in a jiff.
Thank you, the brushbar is now spinning, you have saved me buying a new one. Brilliant.
Wish i watched this before i took the whole thing apart lol. Worked like a charm, thanks for the video.
Thanks a lot man! One expensive replacement battery later my old v6 was still pulsing with the brushbar stopping after a few seconds of use. This ‘little T8 screw’ trick did the job! ;) took that spiral drive thing out and removed all crap from underneath it and bam! All sorted. Old battery is still going strong. No harm in having a spare battery I guess😂
The tiny hex screw changed my life. Thank you!
Thank you your vid helped sort out problem free of charge ❤
Great video. I knew about the hair being trapped in the head.
But I didn’t know about taking the filter apart and checking the dust on the electrical connection.
I cleaned the connection and dust. Now all working 😊
Brilliant. Hair under the brush roller drive worm gear, luckily I had a multi head mini Torx screwdriver. Many many many thanks. 😊😊😊
Brilliant! You saved me £80 for a new head. Subscribed and liked. Thank you.
WATCH THESE VIDEOS TO SAVE $$ AND HEADACHES!!
THANK YOU for this video. I love my Dyson V6 but the bar stopped spinning, and I knew the problem was within the rotor piece itself after trying everything else. Though I love Dyson's products and step-by-step help on the website, their phone/chat/email (I tried them all unfortunately) customer service was tedious, frustrating, and ultimately not helpful. Their solution was that I "needed" to buy a $200 replacement motorhead. At first they told me I simply needed to replace the brush itself which I had to argue--literally the man got testy with me for questioning this--was not the solution. After finally convincing them the motorhead was the issue and some further frustrations, they offered me 50% off the motorhead--still $100!!!! I finally decided to dig deeper into just fixing it myself and stumbled across your wonderful video. I even had some Torx screwdrivers on hand surprisingly. The Dyson parts can be difficult/scary to pull apart, but fixing the motorhead was relatively easy and my sincerest thanks for solving an issue (for FREE) which Dyson's customer service could not. Bravo!
I'm so glad that it helped. such a simple repair when you know how.
FYI: had to use a little WD40 on the rotor as well for anyone who's still having issues after cleaning!
My guy you saved me an assload of money, no replacement dyson for me! Thanks so much, take a like and sub :)
Thank you, took it apart still wouldn’t go until I found this video.
thank you so much it is reeellly help me to fix my dyson be for I don’t know what should I do to fix it and I get sad until I check Google and I see this nice video which is helping me so much appreciate that Sir 🥰🌺
thankyou thankyou thankyou!!! removing the bit with the bar via hidden screw solved for me! saved me some cash, brilliant help!!!
Wow this was so simple but I had no idea where to look! Thanks for sharing!!!!
Brilliant thanks for sharing your experience, my V6 roller stopped working and when I stopped it down the roller connection was solid and didn't have hope to fix but I followership your video and like you showed us the cause was hair (dog hair) matted it was so bad that I had to remove the motor and belt and then carefully knock the roller drive out after removing the screw and plastic twisted drive of coarse, ,then all of a sudden after removing more matted hair the drive was free running,assembled it back ,and now works like new, I didn't have much hope as using a multimeter I could not get any voltage at all when testing beforehand ? But it works now,
so glad it helped you out and kept another dyson from land fill.
How has this not had more views? I did have to buy the special screwdrivers but made my wife happy. It was her hair that clogged it up though!
Thanks. Worked like a charm. There was less debris in mine, but it was the cause.
Thanks bro!! Worked a treat. Except I added a little grease to the bearing as it still clogged/stopped spinning. After a touch of grease on the bearing seems to be working okay. Time will tell 😊
I knew there would be hair behind the big screw. Thanks for showing how to remove
Thanks to your guidance, wife happy ….hoover working like a rolls Royce again …wheel spinning better than ever ..top job .. 👍
Brilliant video, short and to the point. The contacts at 0:48, covered in dust,
was the problem with mine. Works like new again. Thank you, thank you.
Excellent, never knew about that second filter. My V6 brush bar stopped spinning on the opposite end to the motor, and the motor jet spinning the other end. Now that pin is stuck in the end cap. The plastic it sat in git all chewed up.
Great video, just about to buy a new one and you saved me a few hundred pounds👍🏼
Thanks mate the contact points getting a clean fixed it for me
Brilliant. I had cleaned everything else up yet the head wouldn't turn. Sure enough there was impacted garbage behind the chingalera. Thank you so much!
Thanks, the hair behind the rotating spindle on mine was actually part fused together by heat from friction so looked like a real fibre washer! I wouldn't have brave enough to pull the spindle off without this video..btw got away with a small regular Poundland screwdriver v proper torx :-)
You have saved me from buying a new one. Many thanks.
All fixed thanks to your video
Wow excellent video, my Dyson is back to 💯 percent, you deserve 5 🌟 thanks for sharing.
Thanks mate, very helpful. Managed to get the MIL's one fixed with this guide!
Thank you! Cleaning the contacts worked for me.
You saved me a new replacement. Did as you showed and it fixed the spinning issue. Thanks!
Thanks for this tutorial it saved me so much money 🤑
Great video. I cleaned the contacts and solved the problem completely. Thanks so much
Ours V8 has a broken white wire in the swivel joint. There was some lint too, but it will take some rewiring to fix it.
My ocd kicked in when you didnt remove all the hair off the brush roll😂
😹😹😹
The first step should be to check the wand. Mine had a loose electrical connection which made the beater bar work intermittently.
pulling out that last bit fixed it for me. Thanks
so glad you found it helpful.
You are the man🤩🤩🤩👍😄 about to get a new hover not now fixed it with your help works like new nowThank you.
You have saved me buying a new vacuum, thank you 🥳x
You’re welcome 😊
Amazing video!!! Thanks for all the tips.
Removed all the hair (LOTS of it) and cleaned all the electrical connections. Unfortunately, the thing is still not spinning :(
Would you know how I would be able to test if the electrical connectors are actually sending some energy? Maybe with a multimeter or something.
Excellent , I got it working again by watching your video.
Hello I've followed all steps and gave a very good clean but still not spinning, any idears?
Thank you! God bless you 🙏
Thank you👍🏻 T8 screwdriver ordered. 🤞hope it does the trick.
Great video. Worked for me. Very easy. Love these fixit yourself vids.
Today my Hoover was saved by this man
You’re a genius!!!! Thank you so much for solving the problem! Your explanation is fantastic 👌🏻👍🏻👏🏻👏🏻👏🏻
This is so helpful!!! Saved me the money to buy a new one.
i have a V8 and its not like this... the roller comes out, but the inside part of the roller on your video does not come out w my roller
i have that style of brush bar ready to do a video on when I get a chance.
should be up in the next week.
My belt has snapped in the motor housing… can you tell me which belt I need to replace it please?
Thank you
Hi Got the thing apart, great, but no voltage at the two terminals that are exposed on the motor head, any ideas ?
Hi I have a dyson V8 Absolute. But the Brush head motor is shot. I just bought a new Brush head, They even sent me the wrong one.
Hi, thanks for the video. I have a v7 motor head, I followed all the steps and the brush still isn't spinning, do you think there is anything I missed? All the parts were relevantly clean.
the v7 head is the same as the v8 v10 and v11 try putting it on without the wand make sure the connections are clean around the dust bin, try removing the brush bar and see if the motor spins in the head or makes a noise at all. it's hard to say without looking at it.
many thanks for this. Much appreciated. All the best 🙂
thankyou thankyou thankyou😘 my little v6 is now working perfectly🥰
Thanks for the instructions. It worked!
Awesome, worked like a charm. Thanks for making this video!
Thanks for your video, it’s brilliant, I was about to throw my Dyson out
Happy to help check out my other videos for cleaning it and getting working like new.
Great vid Mr. Worked on mine thank You.
thanks for this video. extremely helpful
FABULOUS! just Fab. Thank you fixed. I wonder if you have a fix on the other problem I have? When I press the boost button the machine only works for 1 second then asks me to charge but when I put it on the charger it is charged. Could it be an overheating thing?
try watching my other videos they might help you.
Thank you so much, works perfectly again 🙂
THANKYOU SO MUCH. IT WORKED OUT PERFECT
Excellent video 👌🏻 worked for me - happy wife happy life 😂
The part you're removing at 2:49 in the video - that black helical looking part - mine is broken on one end and I have no idea how I'm going to fix it. I tried wrapping some tape around it to make it fit but that didn't work. I thoroughly cleaned all the debris and hair and dirt from my assembly but it didn't fix it. I believe it's this broken part that needs replaced but Dyson doesn't sell this by itself. I tried searching for the part number which is molded into the round side of the part "12-7460" and I cannot find one anywhere. I don't know what the part is called either to search. Any advice or tips?
probably best to pick up one second hand from Facebook or ebay and just use the new head on your existing dyson.
Do you need special screw driver for this purpose
Thanks , saved me from having to completely take the head apart like i did previously
Still not working. Got new brush and cleaned up everything nicely.