Installation | GlowShift Trans Temp Gauge In 3rd Gen 2003-2009 Dodge Ram 24 Valve Cummins
HTML-код
- Опубликовано: 7 фев 2025
- Learn how to install a GlowShift 7 Color Series Transmission Temperature Gauge into a Third Gen 2003-2009 Dodge Ram 24 Valve 5.9 Cummins or 6.7 Cummins.
Get A Trans Temp Gauge Here: www.glowshiftd...
TRANS TEMP GAUGE KITS
GlowShift Auto Transmission Temperature Gauges monitor the operating temperature of your car or truck’s transmission by measuring the transmission fluid temperature. Overseeing these temperatures helps ensure that your transmission does not overheat, which could cause major engine damage. GlowShift has a variety of 2-1/16” (52mm) analog transmission temperature gauges that read from 80° to 260° Fahrenheit, with digital versions that read from 68° to 302° Fahrenheit.
Pick Up 2003-2009 Dodge Ram Cummins Gauge Pods at www.glowshiftd...
7 COLOR GAUGE SERIES
7 Color Series Gauges come standard with a cutting-edge design that will enhance your vehicle’s interior. Depending on which version you select, you’ll have the choice of a black or white gauge dial with a magnified clear or tinted lens and illuminated red needle. Easily cycle through the 7 Solid Color Modes and 2 Color Cycles available for the analog LED display. Solid Colors include Blue, Green, Red, Teal, Yellow, Purple and White.
AUTO TRANSMISSION TEMPERATURE GAUGE INSTALL ACCESSORIES
Trans Temp Adapters: www.glowshiftd...
Expandable Circuit: bit.ly/2wJIXsl
View our entire product lineup at www.glowshiftd...
CONNECT ON SOCIAL:
Facebook - / glowshift
Instagram - / glowshift
Twitter - / glowshift
#GlowShift
Category Autos & Vehicles
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process. 
Авто/Мото
Awesome youtube channel! And the fact you guys take the time to answer customers questions, even helping them out with any advice, that's pretty damn cool!
Thank you for the compliment!
@:50 you're putting the teflon tape on counterclockwise which will unravel it when you thread it in
Except, always put your teflon tape on so the threads going on is in the same direction you're threading.
Ayy! I didn't know this! Or that it mattered. Thanks for the advice :)
That big clump of loose wires bouncing around in the dash near the pedals shouldn’t be an issue down the road. 🙄
Would I need an extender to install a probe in the passenger side test port on a 46RE in a 96' Dodge Ram 1500?
need to clean the surface where you install the pod with alcohol and use adhesion promoter
Luckily I am installing a deep capacity Speed Master aluminum finned oil pan that has a port just for a temp sensor in my monster truck!! Now to choose the right sensor/gauge. Lucky me.
What a the best transmission temperature gauge for a 1999 f350 7.3l powerstroke
Tell me where to install the temperature sensor in the automatic transmission BMW ZF 6HP19 ???
Is this a rock video or an automotive instructional video?
that's a sloppy install if I do say so myself. what's with the ball of wire shoved up underneath the dash and you give a little piece of wire loom just the reach behind the pillar. but nothing to cover the wires in the engine baby and the sensor on the transmission could use a waterproof plug. unless you're in Arizona I gave that connection six months before it's got corrosion in it and the gauge doesn't read right.
Music is awful and gets in the way of watching
I'd like you see you do a video on temperature with the factory cooler versus auxiliary. I know different parts of the country have different climates might need to go into that also. I'm thinking of adding an auxiliary cooler bypassing Factory chamber. We have some cold days here wondering about confused sensors on those days. I definitely think a standalone cooler would be beneficial with our hot Texas days. And of course we have to have AC. And our Ray Wylie Hubbard and Cody Canada rather than the music on that video.
Is there always a transmission test port, Ive got a 2002 Pathfinder auto trans
im getting this for sure i have a 00 chevy but i got all the info i need a trucks a truck ive seen all this same things on my truck im sure i can figure it out, thanks for making this instructional video made my purchase a done deal. im getting the digital though
Please do a video on a 4l80e trans temp gauge. FOR FUCKS SAKE
That music. Guys. STOP THE MUSIC
The music's more interesting than this video come to think about it.
@@USMC-Sniper-0137 damn
Cant you install it without extender ?
it has 62TE transmission. also does towing damage what part of the transmission.
I am planning on towing a 3500 # travel trailer 2000 miles. it has a built in transmission cooler integrated with air the conditioning condenser. do I have to worry. my caravan has only 7000 miles on the odometer. thanks.
Can you just connect the wires to the battery with a switch inside you truck
Will be looking into this for my 88 F150
Let me know when you put one in a transaxle transmission... i.e. 2012 Odyssey
I just watched your video on how to install the temp gauge on 03 and up dodge ram is it the same on a 01 dodge ram 2500 4x4 with the 5.9 l 360 gas engine with a automatic trans.
This is what I did to it from yesterday and today on my car
It started running hot.. I bought some antifreeze... It was still running hot.. Then I found out my radiator was busted... Got a new radiator.. Still running hot... Got a new thermostat.. Still running hot... He bleed the system twice... So he thought I had a slight crack in my head gasket I put some blue devil in it.... Let it sealed up... Still running hot... We went and got a water pump... Still running hot!!!!
Now it's saying transmission over temp...
What else can I do I have a 2006 Jeep Cherokee Laredo
Why no kits ?
Do have these product fit for my 2007 Acura TL Type S automatic transmission?
Please where is the transmission temperature sensor located in Toyota Highlander 2008 model. Thanks
Do we need to use the extender?
Great video👍👍👍 just ummm would'nt be sticking my hand up between the exhaust & trans when it's hot like that.....
Definitely wait until it cools down fully.
What are the ohms for the sensor
what parts would i need for this to work on my 2005 Chevy Silverado 1500 5.3L? I've been reading most parts are already available on my truck and just need a gauge. just haven't checked everything yet. truck already has the trans cooler and pulling my 3K lb RV soon up a bunch of hills...might not actually be needed but wanna be safe. Thank you
Do you need to drain the transmission temp or that test port is high enough that the liquid doesn't come out?
If you're fast enough, not a lot of liquid should come out. Check out some of our newer install videos.
Will rhose fit a van
Yes, our gauges are universal.
Will this fit a 46RE in the same test port? I’m assuming yes because they’re borderline the same transmission?
Yes, just double check the threads.
Will this work for a 2008 Nissan Sentra se r cvt transmission?
The childish music gets in the way of you nice instruction
My trans temp glow shift says my temp is at 260 on a cold start and boost psi won’t read idk wat happen it’s on my 7.3 idi after it rained this happened they light up but won’t read right
Please contact our customer support directly using the live chat feature on our website or by calling 1.888.GS.GAUGE so we can resolve your issue.
I bought a Glowshift Transmission Gauge to be used on a 2005 Dodge Dakota 6 cyl which I use a lot for towing. What other accesories should I buy to complete the installation. Thank you very much in advance for your help!
Hello, please contact our customer support directly using the live chat feature on our website and they will get you hooked up with everything you will need.
I have a 1972 chevy stepvan, I'm wondering if something that old has a transmission test port. If not what parts will I need.
+Robby Dodson Unfortunately, there would be no way for us to verify if that transmission does an available test port you could use. Also, we would recommend installing a t-fitting adapter into the hot trans cooler line, however, you'd need to determine the diameter of those lines in order to find the correct adapter you would need.
do you guys have the water gauge temp and do you have a video about it :) of how to install
+GAR A Yes, we do sell Water Temp gauges, unfortunately, we do not have any videos for the installation of one.
Does a 2010 pontiac g6 gt have a test port I could use?
Yes, I Have A 98 c1500 Pick Up With A 4l60e They Say The Test Port Is Above The Shifter Linkage On The Transmission and Im Trying To Locate It Because Im Wating To Put A Transmission Temp. Gauge On It.
Anthony Garza Thanks for contacting us! The test port you can thread the sensor to is in that exact location about 3 inches above the shifter linkage. You'll just simply remove that bolt and thread the transmission temp sensor right there! Let me know if you have any other questions or concerns!
I'm wanting to instal a set of pillar gauges In my 05 cummins but I don't trust my self to do the wiring
Braxton Taulbee We recommend having a licensed professional perform the installation of the gauges for you on your 2005 Cummins. You should be able to take your gauges to any auto shop and they should be able to take care of the installation for you. If I can help with anything else don't hesitate to ask!
Will this work on a 4l60e?
Most important is to make sure to buy couple gallons of patient
I have a question for GlowShift. I installed a oil and tranny temp guages. Both work great except when I put on heater inside truck both guages read very hot abot 270. I check both fluids and both are correct with no heat at all. I was thinking a wire would be touching something very hot like manifold but both of them at the same time, I routed both wires different routes. I don't think so. Can you give me a clue? Thanks for the video.
Tony Garza Thanks for contacting us about the issue you're having with your gauges. This is the first time we're hearing about an issue like this and it seems like there could be some type of interference. If you could please send me an email to Mike@GlowShiftGauges.com with your order number, phone number and a good time to reach you, I will have one of my technical support specialists contact you directly to see what exactly is causing that issue.
Hello,
I'm trying to install one of your gauges in an 03 Dakota 4x4 with a 4.7. I don't see a test port near the pan, however, and don't want to block something by putting it in the wrong port. I also want to be sure it is in contact with flowing fluid so it gives me an accurate temp reading. Can you help me, please?
Thanks in advance!
--Dan M.
+Dan Meredith Hello, unfortunately, I am also unaware if there is a test port available. Your best bet will be installing a t-fitting adapter in the hot trans cooler line. You would just need to find an adapter that matches the diameter of your cooler lines, but also has a female 1/8th NPT threaded port on it.
damn music!! had to turn it off
I have an 06 dodge 1500 megacab( basically a 2500) with the 5.7 and a 5-45RFE. Will you test port installation work with that trans. I regularly tow a large camper and am thinking know that the transmission temp may me a good idea.
Thank you for the interest in our product! Yes, the test port will work, but you'll need an extender you'll need. This is the extender: www.glowshiftdirect.com/transmission-test-port-extender.aspx
I am looking to install a transmission temp gauge on a 2013 Chevy Traverse. are there any that plug directly into the computer port inside the car? what trans temperature gauge do you recommend? I am looking for a decent gauge but is easy to install and doesn't cost an arm and a leg. your elite 10 color transmission gauge caught my eye but not sure if it would work or how hard it is to install
Timothy Welch Thanks for contacting us. I did a little research on your 2013 Chevy Traverse and there is a pressure test port on the transmission that you can thread a sensor into, but please confirm the thread size before installing. I could not find a size on the port, but our transmission temp sensors are 1/8-27 NPT so you may need to use an adapter to install the sensor. The Elite 10 Color Transmission Temp Gauge (120° - 300°F) is a great choice as it features an electronic temp sensor, plug and play connectivity with a 6ft sensor wire harness as well as peak recall functions and programmable high and low warnings that will alert you when you reach that set temp level visually and/or audibly. If you have any other questions or concerns don't hesitate to ask!
Ok So This Tip Of The Sensor I Accidently Chiped The Tip Of The Sensor Would That Affect The Reading Of The Temperature? Will I Have To Get A New Replacement Sensor?
Anthony Garza If the tip of your temperature sensor is chipped then it will affect the accuracy of the readings. Which Transmission Temperature Gauge do you have? I can link you to the exact replacement you will need for your gauge.
Could u do this on a 1997 chevrolet silverado 4x4
You can do it on any vehicle you want.
You put your Teflon tape on backwards.. Lol.. Always go the opposite way of the way the part screws in or all your doing is undoing the tape and run a chance of it not doing its job!
Hi sir , can i derictly connect it to my temp sensor,? Mitsubishi lancer 2004 ,
+crizy50 Unfortunately the gauge cannot connect to the factory temperature sensor of your 2004 Mitsubishi Lancer. You will have to install the included 1/8-27 NPT temperature sensor that comes with the Transmission Temperature Gauge.
Is there a test port on a '06 Dodge Charger RT? Just bought one of these gauges and trying to figure out how to install it.
+budmon5587 Unfortunately, I do not believe there will be a test port available on a 06 Charger RT. Your two best options will be drilling and tapping the pan, or installing a t-fitting adapter in one of the trans cooler lines.
+GlowShift Gauges do you guys sell the t fitting adapter or is that something I can find in an auto parts store?
+budmon5587 Unfortunately, that is not a piece we sell, however, you should be able to find one locally. You just need to determine the diameter of your vehicle's trans cooler lines.
Is there a test port bolt on a 2012 Honda Odyssey transmission/axle?
Steve63115 If you're installing a transmission temperature sensor to your 2012 Honda Odyssey, you will need to use either a 8mm test port or a t-fitting. Let me know if I can help with anything else!
Steve63115 There looks to be an inspection port that is 8mm. You can trey to contact your service center or check the service manual of your Odyssey, but unfortunately we don't have any exact specs on that because it's an uncommon vehicle.
I'd rather see the temp sensor screwed into the trans pan.
Helpful video but that music did not age well.
Do you know if this can be installed on my 2012 jeep liberty sport 4x4? I think there is a temperature test port but don't know for sure. could you help me out? and if i can't read my transmission temperature this way how else can i read it? Thank you!
+Daniel Plotzke The gauge can be installed because it is universal. However, I am not sure if your vehicle's transmission does have a test port, nor the thread size that it would be.
I have 3 test ports on my 1999 dodge ram 1500. Which one do i connect too?
Chad Gates Follow the dipstick tube down and there should be a center test port that you can thread into. Let me know if this helps!
Does a 2014 Dodge Grand Caravan transmission has a threaded test port to monitor the AT FLUID TEMPERATURE .?
Sam Daik Is your Dodge Grand Caravan's transmission the 41TE or the 62TE?
GlowShift Gauges 62TE
Sam Daik Thank you for your patience. I did search into the 62TE transmission and unfortunately I'm having a tough time locating if there is any test port location available to install a transmission temperature sensor. I recommend contacting your dealership or referring to you service manual to find this information. I apologize that I couldn't help with this. If there is anything else we can do for you, don't hesitate to ask!
I'm plan on installing a glowshift temp sensor on my 1996 xj.I know a need an adaptor to install the sensor in the aw4 transmission test port but can you tell me if I will also need an sensor extender also?
+Exocartonic I don't believe you'll need the extender, although I can not say for sure. The main thing you want to determine is if your test port is a 1/8th NPT thread size or not.
+GlowShift Gauges I know I will need an auto meter metric adaptor m14-1.5 to thread in the 1/8" sensor I just want to be sure that the sensor won't interfere with the inner workings without the extender.
+Exocartonic I would recommend the use of the extender as a precaution. It is better to be safe than sorry when it comes to your vehicle's transmission.
+GlowShift Gauges do you have an m14-1.5 extender for your 1/8" sensor? or a 1/8" extender.
+Exocartonic Yes, we do have a 1/8th NPT extender. It can be purchased here: www.glowshiftdirect.com/transmission-test-port-extender.aspx
Will this product and video work with my 05 Jeep grand cherokee 5.7 Hemi with 545rfe?
Thank you for the interest in our product! The gauge is universal, so it will work, however, you will need an adapter to install the included sensor.
you used the wrong kind of Teflon tape and your putting it in the test port not the pan
can I do this on my 2000 corolla?
Hidden Concept Our gauges are universal and can be installed to any make/model! Let me know if I can help with anything else!
I made a video showing how to Read Transmission Temp using your Phone and OBD2 bluetooth adapter.
Do you know if GM 700R4s have a test port?
I believe it does on the driver's side by the linkage. However, I can not verify what the thread size there would be.
The video was useful but the music was too damn loud.
What if I am installing 2 Gage's how would I power them
+Jesusmalverde247 You can use the same process that is shown in the video, but instead of wiring one gauge into the expandable circuit, you can wire two into it. If you have any other questions or concerns don't hesitate to ask!
Love the vids...
u could have up grade the fuse that works too
would this work on my 2007 Dodge dakota v8 4.7?
+Walter Castro Yes, it will! However, you will need an adapter in order to install the sensor that is included.
how can we install on jeep wrangler jk 2013?
+firoz scorpio You will need to install the temperature sensor into the transmission pan or you can T off the transmission lines of your 2013 Jeep Wrangler JK. Let me know if I can help with anything else!
the FUCKING MUSIC. wtf
is there any test ports on an 08 grand prix gxp? I've been looking under my car and online and can't seem to find any answers
+Tysen Swank Unfortunately, I was unable to locate any information myself. With that being said, your best course of action to install the sensor will be either drilling and tapping the pan itself, or possibly using a t-fitting adapter to install the sensor.
Wouldn't have been a bad video, but as usual: Typical YOU-TUBE style, had to include the gay-lame 80's drug rocker guitar music in the background.
I did it myself with the Woodglut plans. I think this is the best way to find out how to build it.
next time on dragon ball z billy bob yeehaw
WARNING must be watched muted because of inappropriate mind numbing vomit inducing background musak. Just mute and turn on the Closed Captions. I will be buying any other brand because of the music.
In small words ... pay someone to do it lol
It's super easy! Simple installation, and doing it yourself has the benefit of knowing the work was done properly. The more you let other people work on your car or truck the more problems seem to pop up!
@@TarmanTheChampion I am more likely to do this incorrectly than someone in a shop.
I was gonna shoot my self by washing this long long long process. I think I pay someone to do it lol
This dose not fit the 68rfe 🤬
As much as you guys charge for the gauge itself you want people to spend all this extra money on this extra wiring that should already come with the gauge is a joke selling a gauge without the necessary equipment to install the gauge and to make it work properly is like buying a brand new car without the engine and the dealership making the engine and extra expense
Thank you for your concern. Because our gauges are universal, it is impossible to include every single adapter or fitting to work with every single vehicle ever made, which is why we choose to have them listed as additional add-on accessories. Customers can purchase exactly what they need for their specific vehicle. As far as wiring is concerned, our gauges can be wired without purchasing anything additional. We only suggest that the additional wiring will make installation easier.
@@GlowShift so why not just ask what vehicle the gauge is being installed on and include the necessary equipment for that specific vehicle
This is so trashy with the amount of wire you stuck behind the dash. Not professional. And zip ties? You can’t make it look nice and put it in the wire loom? And y’all are In a shop? Garbage
Look at the battery terminals 🤣
I just used JB weld to secure my wires
Can you just connect the wires to the battery with a switch inside you truck
Does a 46RE trans have a rear port? Truck is a 98 1500 5.9 4wd
Can it be done on the 04 Cummins with out the extension?