You keep the old subframe, wrap the white into matt black, and add a center matt black line through the tank. The overall is so good looking I’m actually thinking about swapping mine out ! 🔥
Yes keep the old tail, the rear end is one of the sharpest and dopest rear end that ever came out ona bike and with this new front end it looks awesome. ❤️❤️🔥🔥
i dont understand how this dude doesnt have as much subscribers compared to the others doing similar contents or anything to do with bikes. this dude is amazing and has very interesting videos.
@@builtfromthebottom definitely get the upgraded tail and sell the old one on Ebay. Probably get more money for the original tail than you pay for the aftermarket parts.
İ think to put 2017 up tail and subframe you must modify gastank mount holder. With taht subframe you must install 2017 up seat and it wont fit to original mounts. Good luck, great job!
for those who are bypassing the headlight control module here's what I did and it worked. *I'm aware of what the headlight control module does but I couldn't care less since I got the whole set for cheap w/out the module* Main headlights: Low beam: black (n) red (p) High beam: Yellow (n) green (p) you can cut the little ends of your pre-existing headlights and solder together or hook it up directly into the main harness of the 08-16 model (I've done both works fine) the only issue is you will have to disconnect the whole main harness every time you remove the headlights VS destroying your 2008 headlights. pick your poison. Running light: 3 wires - black (n) other 2 colours (p) (mine was black w/red line and black w/yellow) I wired both positive together since the parker lights are a 2 pin plug and the newer model is 3 pin. I cut the parker plug (2008 headlights) and soldered the plug to the new headlights. I'm sure you can directly hook it up to the parker lights on the main harness. I will update how long it takes until my headlights fry lol, peace out.
Code 46 is a charging issue. Could be a bad stator or the charging wires that run from the stator to the rectifier. Check the recipient plug to see if they are burnt
Yeah I like the idea of having the tail the older style with the front being newer. There won’t be another bike out there like it. It would be so sick and unique. 💯🔥🔥🔥🔥
I have to say, the 2008 back end with the 2020 front end looks much better. I do not like the 2020 back end on both Rs at all. Get rid of that Akra trumpet and fit a high level Akra, then you will have the second best looking bike out there. I own the best looking bike! Great work bro!
I think a full conversion would be best since there are no videos on a conversion of this type. Also I really love you videos bro. I'm from Saint Lucia and I'm rebuilding my 2008 r6 as well.
I would just do top and stomach of tank matte black leave side blue to flow with fairings and do tail matte black try it then you don’t like it finish whole tank but I think you will like it belly and top is what get nicks and scratches
great vid subscribed! ihave a question what fairing stay did you use? the 09? and just modified it (drilled holes etc) tohold the guage and headlight assembly? or was it a custom fairing stay. i can fabricate easy. also what do you think the chances are of doing a 2020 fairing conversion on a 20081k?
Sup Reece 👍🏻 that R6 is looking 👌how appropriate a Yamaha with a code fault number 46.....Valentino Rossi!! 😂 gonna order a T-Shirt asap bro 👍🏻you are good posting to the Uk 🇬🇧? Adam 🇬🇧
I don't mean to sound like a critic but I honestly don't dig it. The old tail makes the bike really beefy. I'm the sorta guy that's a fan of the newer curved slim tails imo. Although your setup can prob work with new colors and decals!
Keep it as it is. New front old tail. Love the look of the old tails. Cant wait for next episode.
I'd say do too...the old rear end just looks really nice on it
Agreed the old rear is the best
yeah i have the same
I’m doing that
Exactly ...thats great looking bike ever
Would love to see you do a full conversion! Their aren't that many out there and on R6 forums nobody has a good detailed swap post!
I do
Suricato where ?
Check out Immortal engines he did the whole thing and explained it beginning to end.
bad ass dude!
it does look good with the older tail on it. unique man, great job!
It really goes well with the old rear end, and it will look good without the mirror
The newer front with the older rear looks dope..................
That’s what majority is saying 😬
You keep the old subframe, wrap the white into matt black, and add a center matt black line through the tank. The overall is so good looking I’m actually thinking about swapping mine out ! 🔥
I think you should keep the newer back end
You know not to mess with a man that gets on his bike from the right side ❄️❄️❄️🥶
Yess dude keep the old rear end with the new front end it looks sick✌️❤️
Yes keep the old tail, the rear end is one of the sharpest and dopest rear end that ever came out ona bike and with this new front end it looks awesome. ❤️❤️🔥🔥
Deffinitly keep the sub frame as is. Paint/wrap it black as well as the tank so it’ll be a solid line across the mid. 10/10
Hey is it possible if you can give me links that you bought parts from? Or list which parts you bought ? 🙏🏽🙏🏽
Newer back, looks weird due to different design languages
i dont understand how this dude doesnt have as much subscribers compared to the others doing similar contents or anything to do with bikes. this dude is amazing and has very interesting videos.
Change the tail fairings! One of the best parts of the new r6s
I think the 09 rear looks really good. Love the front end conversion too!!
Code 46 is a low voltage in your charging system, my bike needed a new stator/restifier
For sure, keep the old tail light wit the new front end, looks pretty sick actually.
New front and pointy tail. Best of both worlds!
Def put the newer back end! I actually like the blue the way it is.
It’s a little different of a blue in person that’s why I’m going to wrap it
Yeah man , you should get newer tail peace too.
@@builtfromthebottom definitely get the upgraded tail and sell the old one on Ebay. Probably get more money for the original tail than you pay for the aftermarket parts.
İ think to put 2017 up tail and subframe you must modify gastank mount holder. With taht subframe you must install 2017 up seat and it wont fit to original mounts. Good luck, great job!
Been abit since I've watched any content bike related and glad yours came across. You always do solid work man. Thank you for the killer content!
No mat black. Make/keep it blue as the rest. Paint the rims gold. And no diamond stitch seat.
I’m over my diamond stitch phase
for those who are bypassing the headlight control module here's what I did and it worked. *I'm aware of what the headlight control module does but I couldn't care less since I got the whole set for cheap w/out the module*
Main headlights: Low beam: black (n) red (p) High beam: Yellow (n) green (p)
you can cut the little ends of your pre-existing headlights and solder together or hook it up directly into the main harness of the 08-16 model (I've done both works fine)
the only issue is you will have to disconnect the whole main harness every time you remove the headlights VS destroying your 2008 headlights. pick your poison.
Running light: 3 wires - black (n) other 2 colours (p) (mine was black w/red line and black w/yellow)
I wired both positive together since the parker lights are a 2 pin plug and the newer model is 3 pin.
I cut the parker plug (2008 headlights) and soldered the plug to the new headlights. I'm sure you can directly hook it up to the parker lights on the main harness.
I will update how long it takes until my headlights fry lol, peace out.
Hola compañero. yo si tengo el modulo pero no se donde conseguir la cavija de salida.
Interested in that conversion
Code 46 is a charging issue.
Could be a bad stator or the charging wires that run from the stator to the rectifier. Check the recipient plug to see if they are burnt
You deserve a prosperous channel my friend
Keep as is. I have the 2018 and love the tail but dang this looks sick. Besides it’s different and why be like others 👌
Yeah I like the idea of having the tail the older style with the front being newer. There won’t be another bike out there like it. It would be so sick and unique. 💯🔥🔥🔥🔥
I have to say, the 2008 back end with the 2020 front end looks much better. I do not like the 2020 back end on both Rs at all. Get rid of that Akra trumpet and fit a high level Akra, then you will have the second best looking bike out there. I own the best looking bike! Great work bro!
Bike looks awesome! Keep the rear end the way it is!
Thanks Ethan, I think I’m going to have to a lot of people here in the comments are liking the rear end
@@builtfromthebottom hell yea and by the way I am florida too!
I’m definitely going to do this to my bike! Thanks for the awesome video!
Great work, Great Video!!!! Keep it up!!! BFTB!!!
I think a full conversion would be best since there are no videos on a conversion of this type. Also I really love you videos bro. I'm from Saint Lucia and I'm rebuilding my 2008 r6 as well.
Looks pretty dope bro!
Looks cool with the old tail, but i really want to see the new tail fit the old bike
My top 10 fav. Channel in my Subscription 🔥🔥🔥. I'll spectate u everytime. Good luck bro
Thanks 🙏
@@builtfromthebottom Note my name bro
Keep the old back ,,,it's slaying man,,,,damn hot
Keep the older rear. Dope content
Sick :) tail matches nice, keep it.
Do you think it’ll go the same on a r6 2006? Bolting holes and all that ?
I heard pop smoke and immediately subscribed
I be ordering 1 shortly to uk 2 . Oh error 46 check all your wires seems you got dodgy connection somewhere bro
Plz plz plz plz keep the legendary tail, this is the exact thing I’m doing on my 06.
keep the original rear and wrap it.
Great job Reece
More uploads, I love it
Best content! Please remove the ugly rear passengers pegs. Also i prefer the new rear tail on the r6.
It will be great if you add all the parts and prices at the end of each video 😊 And at the end of each build u should add the total cost
Ordered a T-shirt to come to the UK 🇬🇧
I just saw the order Thanks!! for the support Lee
looks good bro! keep it like this! (with the wrap)
Make the rear end 2020 also.
Wish you went full 2020 look
better if you put the new rear end...and blue looks cool...
Keep the tail. Bike looks dope asf
Really looks amazing
I think code 46 is something has to do with the electronic problem
Code 46 means Rossi
2008 model looks way better than new one.It was my first bike 10 years ago..bad ass bike
let's do it with the new rear end bro
New rear end 🔥
Don't make them completely matte black definitely just a black line but keep the older back end with the new front that's sick as hell
Keep the old sub frame ... give it a racing strip
I’m prob going to keep the subframe Thanks for the support brother 🤙
Bro just leave it stock tail it’s looks sick
Love your video and your work bro.. keep it up.. sending love from Malaysia 🇲🇾 👏🏻
Love this conversion do you know if you could do the same with the R6s?
Kinda like the white tail tho👀 why not wrap the front white
I would leave it the way it is except wrap the white on the tail make it black but leave the blue tank
It looks awesome bro👌👌👌👌👌👌👌👌
Awesome job man, mad props
I would just do top and stomach of tank matte black leave side blue to flow with fairings and do tail matte black try it then you don’t like it finish whole tank but I think you will like it belly and top is what get nicks and scratches
Very cool brotha
Nice conversion bro, keep it up.
Keep the older tail I was thinking about doing that on my bike too
Put the New rear end 💪🏼 full convertion
Would be nice if tail will be newer one too
Looking sick bro!
With all these motorcyclesI'm inclined to ask: Where you get all the money for these bikes? lol. Anyway keep up the great work.
I buy and sell them
Sexiest R6 ever!!😍 dont change the old back-end...🔥
R6 is one of my favorite bike❤️😍
Nice work 👍👍
Do the new rear end looks way better already have a subframe also for the 2029 trying to build the same bike as you
You trying to sell that subframe? 😏
@@builtfromthebottom for how much? And it comes with the tail light also text Frizy.Moves on instagram
@@builtfromthebottom text me on instagram if you want to buy it
can you update the description with some websites where you got all the parts
Wow great work!
i think with the new tail will be cool
Need links to parts and kits!! Thanks
Old front end and new rear end would look best IMO
great vid subscribed! ihave a question what fairing stay did you use? the 09? and just modified it (drilled holes etc) tohold the guage and headlight assembly? or was it a custom fairing stay. i can fabricate easy. also what do you think the chances are of doing a 2020 fairing conversion on a 20081k?
Sup Reece 👍🏻 that R6 is looking 👌how appropriate a Yamaha with a code fault number 46.....Valentino Rossi!! 😂 gonna order a T-Shirt asap bro 👍🏻you are good posting to the Uk 🇬🇧?
Adam 🇬🇧
Thanks Adam! and yeah, it's just expensive to ship there I think its like 12$ I have two other orders going out to the UK tomorrow
my dream motor🙁..
keep safe idol..god blessed.❤
Thanks John 🤙
I subscribed bc the intro music lmao
Sounds like that's a plan man
where can i buy the conversion kit! looks amazing
It's not garments it's grommets...... rubber grommets.
Bike looks great!! Btw, what is code 46? That just means it is going to be fast like Rossi!
I thought 46 meant I have to drag knees around every corner 😬
Stunning
I don't mean to sound like a critic but I honestly don't dig it. The old tail makes the bike really beefy.
I'm the sorta guy that's a fan of the newer curved slim tails imo. Although your setup can prob work with new colors and decals!
my dream bike 🥺🔥 i hope i have R6 too 🥺🔥
So are you going to open up a shop and sell bikes once you have a complete inventory?
Leave it like that looks better
Awesome content