Just ordered a couple of water seal kits from you guys. The vid inspired me to replace them and give the machines a good clean up. Thanks again guys. Awesome tutorial.
I have replaced the lance hose on my machine and now the seal kit following your excellent video. However my kranzle every three or four minutes re pressureises can you help ?
Yeah sure, l👀k for leaks 1st, (any leaks) or even water coming out of the nozzle when trigger closed Sort any leaks If it still happens then it’s an internal leak most likely the out let valve take off and clean 👍
I have cleaned the inlet filter and removed and cleaned the drain bolt I’ll change the washers on the hose line and get back to you on Monday day I’ll probably call you guys Thank you for your response
Top Video and very helpful. Unfortunately, I don't understand everything to 100%, but it's enough to understand what is meant. Keep it up, Greetings from Germany
Hi Excellent video. I have milky oil, so suspect the water seals. Can you supply the water seal kit? Also is there a particular lubricant you recommend. Thanks and hope you can help. Yours Greg
Hi Greg yes we supply any kranzle part 👍 Your oil chamber will need stripping and cleaning to prevent milky oil that is left in mixing with the new kranzle-pressure-washers.co.uk/collections/seals/products/genuine-kranzle-14-mm-water-seal-kit-49053-fit-new-7-122-10-122-models
Hello I’m Pedro ask if kranzle has a 220volt,,I’ve notice it in your previous video,,can you please reply can you give the model is 220volt,thanks pedro
So my Kranzle 1322 has zero pressure when I turn it on. I have not replaced the seals yet like you just did. Do you think there is a possibility that changing these could bring that pressure back? Thx!
Milky oil is not always a case to change the water seals, it is possible that the oil housing has had moisture in it like condensation and may just need the oil changing. if oil or water leaks from the pump then yes you will need to change the seals. find us on instagram @kranzle_ and contact me if you need help
I will strip out all the seals and clean off to see if any contamination. Can you replace damaged ones only or is it hard to see and obvious marks in seals?
if you see any damage on the seal it is best to just change the whole kit, otherwise you may have to strip the machine again soon as all the seal have had the same amount of work
yes it may help if you have a water leak, sometimes milky oil is just a little moisture in the oil chamber like condensation and may just need cleaning out
@@KranzlePressureWashers I was able to take it apart and found the culprit of the milky oil which was a leaky seal. However the parts have been stuck at customs all week!!!
Sorry not sure what your on about, the link for the seals that are in stock is in the description??, it’s nowhere near the cost of a new pump?? In the seal kit there are 6 seals, 6 washers, 3 support disk and instructions
Honestly speaking i own a Brand new Kranzle 1622 i opened the box to find out they now come with NO SIGHT OIL GLASS .not to see the oil and keep a eye on the color of the oil ect.. IS BULL SHIT SCAM CUTTING CORNERS LIKE THAT SHAME ON KRANZLE as a owner I am pissed that You guys/Kranzle are now cutting corners like this .what else has Kranzle cut corners on the inside moving parts .The versions you have there where the best solid built models make by Kranzle . the inside components seal's where changed to a lower quality after that. By cutting corners and selling lower quality 1322/1622 to America will now you by loosing business. Cut it out and bring back the 2020 model builds again
Oh if all high pressure washers were that simple. Every day I like Kranzle more. Congratulations.
Thank you for this. I changed the oil yesterday and I need new seals. This is a HUGE help!!!
Just ordered a couple of water seal kits from you guys. The vid inspired me to replace them and give the machines a good clean up. Thanks again guys. Awesome tutorial.
Great to hear!
I need to order a couple of water seal kite from you. Please share your email & contact details
I have just replaced my pump seals thanks to your expertise advice.
Gress laga sakte hai ring ko plzz help me
Just would have like if you put silicon on so I can see how much to put on
Silicon? The grease I use is a water resistant lithium grease and only use a small amount 👍 hope this answers the question
i fill the groves of the seals with silicone grease before i put them back in........tks nice video
Great Video and done nice and slow that people can actually follow it and understand it . Thank you .
Glad you liked it!
Just replaced my seals with your excellent advice and spot on video thanks very much👌🏻
Awesome 👏 so glad it helped 👍
Should have added, my Kranzle is a K7.
Thanks again.
Greg
I have replaced the lance hose on my machine and now the seal kit following your excellent video.
However my kranzle every three or four minutes re pressureises can you help ?
Yeah sure, l👀k for leaks 1st, (any leaks) or even water coming out of the nozzle when trigger closed
Sort any leaks
If it still happens then it’s an internal leak most likely the out let valve take off and clean 👍
I have cleaned the inlet filter and removed and cleaned the drain bolt
I’ll change the washers on the hose line and get back to you on Monday day
I’ll probably call you guys
Thank you for your response
how much is the seal kit please
All the latest prices are on the website
kranzle-pressure-washers.co.uk
Hey there I've been trying to order these seals. Do you ship to the us?
I am having a problem motor is not tripping it is working continuously it should take a break of 5 to 10 seconds then work.how to solve this problem
@@gulsamar2121 it is difficult to diagnose from what you said,
What machine do you have
Is there any noise (hum buz) from the motor?
@@KranzlePressureWashers I am using this motor in fog system
Why a bran new pump need the seals replaced?
Haha 😂 I didn’t have a machine with bad seals but still wanted to do the video so had to use a new machine 👍
Very detailed!! Great job!!
Can worn out packing cause no pressure even though its not leaking water from the housing and oil is not milky?
Possible but unlikely, find me on Instagram @kranzle_ And send a video of the machine working
Top Video and very helpful. Unfortunately, I don't understand everything to 100%, but it's enough to understand what is meant. Keep it up, Greetings from Germany
Greetings from the UK, You would understand less if i was to try to speak German LOL
Hi
Excellent video. I have milky oil, so suspect the water seals. Can you supply the water seal kit? Also is there a particular lubricant you recommend. Thanks and hope you can help.
Yours Greg
Hi Greg yes we supply any kranzle part 👍
Your oil chamber will need stripping and cleaning to prevent milky oil that is left in mixing with the new
kranzle-pressure-washers.co.uk/collections/seals/products/genuine-kranzle-14-mm-water-seal-kit-49053-fit-new-7-122-10-122-models
Very well explained, thanks for the tutorial.
Glad it was helpful!
My brand new k10 is leaking water from one of these three holes,is this normal?
NO your machine if brand new should not leak from anywhere, I would take it back to the shop you bought it from for inspection
K1050 TS ordered. How many hours is recommended for seals replacement?
Seals can last for years, personally i would only change seals if they leak or if i find them lose in the pump when i service the machine
Hello I’m Pedro ask if kranzle has a 220volt,,I’ve notice it in your previous video,,can you please reply can you give the model is 220volt,thanks pedro
Hi what is the white grease you use for reassembling? Excellent video's, by the way.
The white grease is a water repellent lithium grease, I will try to find the name of it. 👍
@@KranzlePressureWashers Many thanks for your prompt response.
So my Kranzle 1322 has zero pressure when I turn it on. I have not replaced the seals yet like you just did. Do you think there is a possibility that changing these could bring that pressure back? Thx!
Yes it will obviously
find me on instagram and send a video of your machine @kranzle_
Nice tutorial! I’ll keep this saved for the day when I need to replace the seals in my K1122TST.
Glad it was helpful!
I have got milky oil so is it just this kit. I have another machine that leaks oily water so am thinking the oil seal kit too?
Milky oil is not always a case to change the water seals, it is possible that the oil housing has had moisture in it like condensation and may just need the oil changing.
if oil or water leaks from the pump then yes you will need to change the seals. find us on instagram @kranzle_ and contact me if you need help
I will strip out all the seals and clean off to see if any contamination. Can you replace damaged ones only or is it hard to see and obvious marks in seals?
if you see any damage on the seal it is best to just change the whole kit, otherwise you may have to strip the machine again soon as all the seal have had the same amount of work
Is it similar for the K1050P?
yes similar more like its bigger brother
I have a milky mix in my oil would this help???
yes it may help if you have a water leak, sometimes milky oil is just a little moisture in the oil chamber like condensation and may just need cleaning out
@@KranzlePressureWashers I was able to take it apart and found the culprit of the milky oil which was a leaky seal. However the parts have been stuck at customs all week!!!
Great informative vid guys. Thankyou
Glad you enjoyed it
Hello sir my model by Kranzle 2195 TS maitance by ..
This video helped me alot
Thank you
Thanks for your comment, glad to hear it helped
Anyone know the torque settings of s rows?
Tight enough not to rattle off, loose enough not to strip the threads
thanks from Belgium
I have an AQ series pump PN # 0600152
Can you tell me what type of oil and how many Oz. Please
im not exactly sure in "oz" but there should be a dipstick for you to check oil levels
I think that insulated screwdriver has seen better days!
Keep them coming, really useful series of videos. Oil change video next please 👍🏼
Coming soon!
11:57 Super
I want water seal
Nice
Very hard to find seal , thousand different pump ,and even if you think on internet coast more den New pump . For tree rubber seal just none sanse
Sorry not sure what your on about, the link for the seals that are in stock is in the description??, it’s nowhere near the cost of a new pump?? In the seal kit there are 6 seals, 6 washers, 3 support disk and instructions
@@KranzlePressureWashers What shops is , I'm installed new pump 85 dollars New seal 60
@@KranzlePressureWashers Det is different pump my pump is carcher 3200 psi
@@kirksdva8310 and is your pump cheaper than a seal kit?
@@KranzlePressureWashersso looks like . Carcher seal 70 dollar
Super
Honestly speaking i own a Brand new Kranzle 1622 i opened the box to find out they now come with NO SIGHT OIL GLASS .not to see the oil and keep a eye on the color of the oil ect.. IS BULL SHIT SCAM CUTTING CORNERS LIKE THAT SHAME ON KRANZLE as a owner I am pissed that You guys/Kranzle are now cutting corners like this .what else has Kranzle cut corners on the inside moving parts .The versions you have there where the best solid built models make by Kranzle . the inside components seal's where changed to a lower quality after that. By cutting corners and selling lower quality 1322/1622 to America will now you by loosing business. Cut it out and bring back the 2020 model builds again