Hey man I just gotta thank you. My 1322 was leaking like crazy (when I took it apart it had 5 washers instead of 6) and with your help I was able to get it rebuilt. Thank you so much!
It's amazing how repairable these Kranzle units are! I have a couple old ones I'm rebuilding and it's fun. They are expensive but if they last 10+ years....then they are actually chepaer than a $200 unit that you have to replace every 2 years. or about the same price.
Good video and u did well, informative and is what most will expect when working with this type of machine...If i may suggest, i would take off the oil housing plate so you can clean the oil housing thoroughly from the oil and water mix because any trace of that will contaminate your new oil and will get milky again after that inspect the plungers for any gauging or un even marks (replace if there is severe gauging) and take note, i would also recommend buying a ultra sonic cleaner that can fit your pump head, it'll make your cleaning and maintenance a breeze. Also torque meter and if iirc max tq is no more than 21 ft lbs for the bolts. Move the cord from the front to the rear there are holes already in place and cap the front, it'll save your power cord. Invest on viton and parbaks seals and a good silicone grease. i would also check the 6 plungers and clean them using the ultrasonic cleaner. Lastly i would clean the housing very well as the fins act as heat exchanger if their dirty ur Kranzle motor would be running hot than the usual. If you need help or have question let me know i'll message u.
Hey man I just gotta thank you. My 1322 was leaking like crazy (when I took it apart it had 5 washers instead of 6) and with your help I was able to get it rebuilt. Thank you so much!
Awesome man so happy my videos help you!! Thanks for subscribe!
It's amazing how repairable these Kranzle units are! I have a couple old ones I'm rebuilding and it's fun. They are expensive but if they last 10+ years....then they are actually chepaer than a $200 unit that you have to replace every 2 years. or about the same price.
Yes sir thanks for commenting and subscribe in advance! 🙏🙏🙏 I love my kranzle
@@RaldasDetails I will subscribe.....hoping you can return favor :) I'll do a breakdown of my unit and video it. thx again!
Good video and u did well, informative and is what most will expect when working with this type of machine...If i may suggest, i would take off the oil housing plate so you can clean the oil housing thoroughly from the oil and water mix because any trace of that will contaminate your new oil and will get milky again after that inspect the plungers for any gauging or un even marks (replace if there is severe gauging) and take note, i would also recommend buying a ultra sonic cleaner that can fit your pump head, it'll make your cleaning and maintenance a breeze. Also torque meter and if iirc max tq is no more than 21 ft lbs for the bolts. Move the cord from the front to the rear there are holes already in place and cap the front, it'll save your power cord. Invest on viton and parbaks seals and a good silicone grease. i would also check the 6 plungers and clean them using the ultrasonic cleaner. Lastly i would clean the housing very well as the fins act as heat exchanger if their dirty ur Kranzle motor would be running hot than the usual. If you need help or have question let me know i'll message u.
Brother thank you so much I’ll definitely contact you in the future to learn more about this 🙏🙏👍🏼👍🏼
Hey Tony where can I get these water seals to buy
Ahora asta técnico de hidrolavadora te volviste te acordás las reparaciones que hacíamos
Jajaja si papa!! Recuerdos bonitos!!
Which pressure washer is best to get for your mobile setup (AR Blue 630 vs Kranzle)
Kranzle 1322ts
Wats up Tony do you still need water pump for tank with Kranzel power washer?
It depends on we’re you install the kranzle if is level with the tank you don’t need a pump
Thank you
Is the unloaded bent ?
Severely lol
Hi sir I'm Bhaskar
My machine kranzle 2195ts
Oil leakage
Прикольно. Только одно непонятно, зачем на воду столько сальников, аж по две штуки на плунжер?!😮
Thanks 🙏