I can not thank you guys enough!!! My drivers side window had come off the two bottom clips due to it catching on the window rubber seal clips when I was putting my window up this afternoon. I was able to follow the instructions on your video, remove the glass, then replace the silicon on both ends and after waiting for it to dry I have managed to get my window back on and working. LEGENDS!!!!!!! easy to follow, and saved me from having a very wet car as it is raining here in Brisbane, Australia.
Thank you Soooooo much for this video. If you've seen the instructions that come with a regulator, you know this video is absolutely necessary. Especially for a Know-nothing like me. This video was a perfect guide for the whole process. If we had 1AAuto in my town, I would use them exclusively for my auto part needs. Thanks again!
My drivers side window clips became loose and the glass kept separating from the regulator. The clips remained on the regulator and the glass separated from the clips. I used JB epoxy and glued the clips to the window. I just repaired it this morning and it seems to working fine now. Thanks for the detailed video, It made the job go a lot faster.
THX for the instructions. I greased the tracks where the white plastic runners are at and I sprayed silicon lube in the window tracks and everything is fine. I didn't have to buy a new regulator:)
Thanks to this channel I've been able to save myself some money. This time around I accidentally dropped my friends credit card in the window slit and this video helped me get it back. Thanks for all the great videos, I appreciate it them as I know other people do as well :)
What type of material attaches the window itself to the brackets? The brackets then attach to the window power regulator. I ask because my window became loose from the brackets and I am trying to find a new type of glue that will bond to the plastic and glass. Thanks for the help.
That’s is a great video. Best step by step I found. After following this video I found out that the two black clips on the bottom of the window is broke. Can those be replaced or I will have to buy another window?
+Michael John Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2001-06-hyundai-elantra-window-regulator-front-pair/i/1awrk00855?RUclips&CTA+Comment&Nsdf7nBoj6w
I have an 03 Elantra and the only issue I have is when I lower the window it seems like it takes more effort to lower than when I raise it. It raises with no problem but has a hard time lowering only in cold conditions. Can it be just the motor?
+Pat Sherratt Thank you for watching. Unfortunately, we do not have a video for that fix. We will keep this in mind for future repairs. www.1AAuto.com?RUclips&CTA%20Comment& 866-403-3393
Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. Thank you for watching! 1aauto.com 888-844-3393
+anthony frye If you can hear a whirring sound, the motor is still working. However, we recommend doing the motor and regulator at the same time. Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +MetalcoreRyan
My Hyundai Elentra's passenger window just stopped 4 inches from closing. It made a snapping noise, do you think that the regulator broke and needs to be replaced? what do you think it could be, any advice would be greatly appreciated. Also around how much do you think it would cost for me to fix it? Thanks:)
+Joshua Robles It would be a different procedure for that vehicle. We currently do not have an auto repair video that shows you how to replace the window regulator on your vehicle but we do carry a replacement window regulator for your vehicle. Here is a link to them goo.gl/zystny?RUclips&CTA%20Comments&
My 2004 Hyudai Elantra all 3 passenger door locks didn't 'unlock' when I unlocked from driver power door lock switch. I have to manually unlock them. Please advise
+James Chuaycham ป้อม ศักดิ์ชัย They should all unlock for you. You may want to check the wire harness between the door and body of the car for a broken or a frayed wire that might need to be repaired. Hope this helps you out. 1aauto.com
I have a 2004 hyundai sonata and front passenger side window is not closing all the way to top. Can you please advise me what could be wrong ir show me how to fix it. thank you
Thank you for watching. It is possible you have a problem with the motor or regulator. It is also possible it is getting hung up on the weather stripping. You would need to remove the door panel to see what is wrong. 888-844-3393
My wife's '01 Elantra was having trouble where the driver's window control switch stopped working for the passenger window. She'd have to reach over and control it from the passenger door. Now, neither works, and both the front and rear passenger windows won't go up or down. Both driver-side windows still work. Any idea what might be wrong?
+Gabriel Peters It's possible that the regulator isn't locked in place, but that the motor is dead. If the motor dies, or seizes up then it won't go up or down. Additionally, it's possible that the switch in the door is what's broken. Just a few different items you could try to troubleshoot. For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/2001-06-hyundai-elantra-window-regulator-front-pair/i/1awrk00855?RUclips&CTA%20Comment&ATony
great video - needed this to be able to replace the door lock actuator -- the engineer who designed the white clips on the door lock should be shot... if you widow regulator panel does not perfectly align you will have a heck of a time putting the panel in --- see video 7:40. Of course it could be that I was doing the work in an unheated garage -- outside air temp 35 F.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You guys are the best! You have helped me with so many issues. I am truly grateful guys.
I can not thank you guys enough!!! My drivers side window had come off the two bottom clips due to it catching on the window rubber seal clips when I was putting my window up this afternoon. I was able to follow the instructions on your video, remove the glass, then replace the silicon on both ends and after waiting for it to dry I have managed to get my window back on and working. LEGENDS!!!!!!! easy to follow, and saved me from having a very wet car as it is raining here in Brisbane, Australia.
Sera Millyard Thanks for the kind words. Glad to hear we could help you out. 1aauto.com 866-403-3393
Thank you Soooooo much for this video. If you've seen the instructions that come with a regulator, you know this video is absolutely necessary. Especially for a Know-nothing like me. This video was a perfect guide for the whole process. If we had 1AAuto in my town, I would use them exclusively for my auto part needs. Thanks again!
My drivers side window clips became loose and the glass kept separating from the regulator. The clips remained on the regulator and the glass separated from the clips. I used JB epoxy and glued the clips to the window. I just repaired it this morning and it seems to working fine now. Thanks for the detailed video, It made the job go a lot faster.
THX for the instructions. I greased the tracks where the white plastic runners are at and I sprayed silicon lube in the window tracks and everything is fine. I didn't have to buy a new regulator:)
Thanks to this channel I've been able to save myself some money. This time around I accidentally dropped my friends credit card in the window slit and this video helped me get it back. Thanks for all the great videos, I appreciate it them as I know other people do as well :)
Once again RUclips has saved my ass. Thanks for this video.
Great video I just changed the regulator I ordered for you guys on my step sons car.
Thank you. My girlfriend's car window adhesive to the bolt carrier unglued. Fixed it in about 2 hours
Thanks for an awesome video, with your help i was able to fix my window with relative ease.
Normally there is a special glass epoxy that you can pick up locally at either a glass shop or even the dealer.
You guys should do videos on 05 Hyundai sonata. There is hardly any videos on this car out there.
Thanks for watching. We will keep this vehicle in mind for future videos.
1aauto.com 888-844-3393
What type of material attaches the window itself to the brackets? The brackets then attach to the window power regulator.
I ask because my window became loose from the brackets and I am trying to find a new type of glue that will bond to the plastic and glass. Thanks for the help.
That’s is a great video. Best step by step I found. After following this video I found out that the two black clips on the bottom of the window is broke. Can those be replaced or I will have to buy another window?
+Morpheus Cosplay Thanks for watching! Those clips should be replaceable, but we do not carry them unfortunately. 1aauto.com
What type of shop do I take my car to get this same job done
Your vids are always spot on. Thanks
+Michael John Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2001-06-hyundai-elantra-window-regulator-front-pair/i/1awrk00855?RUclips&CTA+Comment&Nsdf7nBoj6w
You may want to take the door panel off to see if there's anything wrong with the window regulator. 1aauto.com 888-844-3393
do you have a power door lock removal on a 2003-2005 Hyundai elantra... im having trouble with removing the actuator harness connector, thank you!!
I have a question why you replaced the whole thing? Not just the motor ? The whole part was damaged? ?
Razor blade for the vapor barrier. How come I never thought of that!? Look so much cleaner than the usual "just peel it" method.
I have an 03 Elantra and the only issue I have is when I lower the window it seems like it takes more effort to lower than when I raise it. It raises with no problem but has a hard time lowering only in cold conditions. Can it be just the motor?
do you have a video on replacing drivers side door handle cable. door won't open from inside.
+Pat Sherratt Thank you for watching. Unfortunately, we do not have a video for that fix. We will keep this in mind for future repairs. www.1AAuto.com?RUclips&CTA%20Comment& 866-403-3393
Do you have a video on doing this with a 2009 Hyundai Elantra?
Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. Thank you for watching!
1aauto.com 888-844-3393
excelente
HOW DO YOU KNOW IF ITS THE REGULATOR OR JUST THE MOTOR...ALL SO I CAN NOT FINE A VIDEO FOR MY CAR 2004 HYUNDAI TIBURON,, CAN U HELP ME?
+anthony frye If you can hear a whirring sound, the motor is still working. However, we recommend doing the motor and regulator at the same time. Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?RUclips&CTA%20Comment&ATony 866-403-3393
This may be an odd request/comment. Is there anyway you could help me locate the power window relay on a 2001 Hyundai Elantra?
Thanks bro helped me out slot was so easy to get done thanks to you!!!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +MetalcoreRyan
none of my windows on my 2006 hyundai elantra work. what could it be. its not the fuses
My Hyundai Elentra's passenger window just stopped 4 inches from closing. It made a snapping noise, do you think that the regulator broke and needs to be replaced? what do you think it could be, any advice would be greatly appreciated. Also around how much do you think it would cost for me to fix it? Thanks:)
Would it basically be the same for a Hyundai tiburon 2004 ?!
+Joshua Robles It would be a different procedure for that vehicle. We currently do not have an auto repair video that shows you how to replace the window regulator on your vehicle but we do carry a replacement window regulator for your vehicle. Here is a link to them goo.gl/zystny?RUclips&CTA%20Comments&
My 2004 Hyudai Elantra all 3 passenger door locks didn't 'unlock' when I unlocked from driver power door lock switch. I have to manually unlock them.
Please advise
+James Chuaycham ป้อม ศักดิ์ชัย They should all unlock for you. You may want to check the wire harness between the door and body of the car for a broken or a frayed wire that might need to be repaired. Hope this helps you out. 1aauto.com
I have a 2004 hyundai sonata and front passenger side window is not closing all the way to top. Can you please advise me what could be wrong ir show me how to fix it.
thank you
Thank you for watching. It is possible you have a problem with the motor or regulator. It is also possible it is getting hung up on the weather stripping. You would need to remove the door panel to see what is wrong.
888-844-3393
My wife's '01 Elantra was having trouble where the driver's window control switch stopped working for the passenger window. She'd have to reach over and control it from the passenger door. Now, neither works, and both the front and rear passenger windows won't go up or down. Both driver-side windows still work. Any idea what might be wrong?
+Fatal Delay Thanks for watching! The issue could be with both switches or the window regulator/motor itself. 1aauto.com
why would the regulator lock in place? I can,t get the I window to raise up at all
+Gabriel Peters It's possible that the regulator isn't locked in place, but that the motor is dead. If the motor dies, or seizes up then it won't go up or down. Additionally, it's possible that the switch in the door is what's broken. Just a few different items you could try to troubleshoot. For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/2001-06-hyundai-elantra-window-regulator-front-pair/i/1awrk00855?RUclips&CTA%20Comment&ATony
great video - needed this to be able to replace the door lock actuator -- the engineer who designed the white clips on the door lock should be shot... if you widow regulator panel does not perfectly align you will have a heck of a time putting the panel in --- see video 7:40. Of course it could be that I was doing the work in an unheated garage -- outside air temp 35 F.
Not easy to follow, but thanks for posting.