I love your 20+ minute videos and appreciate the time you put in to educate and share your wealth of knowledge. I am a new evo 8 owner, and am learning a ton. I have a built 04 Sti that I’ve done everything to myself on my driveway. I just installed a 340 with id1300s - shooting for just a fun weekend car high 400s low 500s
BD thanks so much for this video. I have been digging in absorbing so much knowledge. I just got a stock evo 8, and ended up going with ID1300s, an aem 340 pump and currently stock turbo. I went with the 1300s to have a bit of room over the 1000s / 1200s as Im going FP black over the winter. Plan to max the injectors for e85 but primarily run a 93 map as e85 is rare around here
I read many reviews on the forums and for a 93 and e85 the best injector I found was the ID1300X, combine that with a 450, S2 and a punchy fpgreen type turbo, that's my ideal set-up
Great video man! Thanks for sharing your wisdom and experiences. Got a fairly stock E9 with the regular bolt-ons. Decided to go for the Walbro 255 and keep the stock injectors. Going for a dyno tune this summer. Not chasing big gains, just a reliable garage queen.
Thanks for this, think I need to upgrade my return line, and add a pulse damper. I am running evo x built 2.2l stage 1 cams - 1650cc stainless Injectors. 525lph walbro, DW battery hard wire kit.aorund 500whp. The car hunts a lot and cuts out when i put my foot on the clutch all the time when driving around town. Hopefully the pulse damper and bigger return will help. Thanks mate 👍🏻
A friend just turned me on to BD Alchemist. Already love this channel. I especially love how dude is so DTE. Wish I could get him to come to Japan to tune my Evo X 😂. Seriously though ... If you're ever coming to Japan, hit me up 😃
Subscribed. Do you have any evo 5 or 6 to make videos about or in the future?. I'm restoring one atm and trying to learn as much as possible. Hello from Australia
For a double pumper you said that you use a hobb switch. How about speedcircuit's secondary trigger kit that uses the no longer boost solenoid conector once a 3 port is installed.
Maybe do a tech video on deleting that resistor module and installing ID 2100s. Also do you have a tech video or could recommend a tech video on that return line modification when upgrading to a larger single fuel pump?
Awesome content. I just picked up a radium hanger, Walbro 525, radium fuel line kit, radium rail with damper, radium afp regulator with gauge and fic 1650 injectors. Getting ready to turn it up more when I put in my kelford 214-b cams and kelford springs etc and arp head studs. Just gotta get my clutch pack for the sst still. Would you recommend the ssp 600, 700 or the jacks transmission 600 clutch pack. I can’t find many reviews on the jacks transmission ones and wondering if I would really need the ssp 700 or if the 600 would suffice.
i dont think i said i prefer one over the other. if i did i meant that the 1000 has been around longer so its particulars are well known. the 1050x are good as well but i would go with fic 1200 for the $$
hello I have a lancer ralliart b411 block, with 400hp on wheels, but last week from parking I accelerated it to 7 k revolutions the car turned off and the whole system was on but the engine turned off and did not start I saw that white smoke came out pot the exhausts and a little by the engine! what could it be that my car won't start
Great content, Question.....do you see any advantages for running one big external pump like an aeromotive or magnaflow rather than 2 intanks for someone who's not gonna be replacing there oem gas tank to a fuel cell ?
Hi, thx to you for wrapping it up quite simply. Maybe it just missed it, but which AN size do u use for feeding and return, assuming 450 or dual pump setup ?
"you" can , but as someone who's going to do alot of cars and most of the cars will be driving by a laymen , we have to go with a sure thing. A single 450 can do 700 but at the edge. Same with 525
So I've got 2150s and a buschur double pumper setup being e tuned currently and absolutely no matter what open loop SD or what ever he tries we can not get the car to richen up on tip in .... it's built head block and big turbo oversized valves and mivec delete exh side .. any help would be appreciated 🙏
Who's ur tuner and what have u tried so far. Also hard to say without seeing ur map. I will tell u this though. Recently (like last week), I have had to send back a set of 2150s do to malfunction. But it threw a code for it.
That’s kind of good, but how would you manage the minimum pulse time with ( 1.7 msec) on evo X stock ecu? The larger the injector - the more rough idle will be. Correct me if I’m wrong
Hey I was wondering if you can help me out , so I recently bought an evo was goin to buy it as a shell and just have it as a project but the owner decides to throw in his new engine he blew his engine before so he bought a oem short block( it’s not stock) / he also got a tomei 2.3 stroker kit / PT6766 / Sheepy manifold / 2150 Fic ….etc ( everything is either new or brand new and there’s alot more just not tryna type ) anyways we just got to the fueling system it gots a radium double pumper with walbro 450s but I’m not trying to push a ridiculous amount of power I want around 500+ just so I can be somewhat street reliable but Ik with this setup It’s goin to need to be high hp so my question is cause I’m about to buy the relay kit for the pumps but would it be okay to have 450s and not even be at such high horsepower where I need them ? Or should I switch them out or just run 1 450? * I’m going to be making my own build on this car in the future so I want a 6266 or 6466 with a built 2.0 instead of 2.3 * Ik I typed a lot my bad but if you could respond I would appreciate it 🙏🏽
Heyy bro, i have a walbro 255 on my EVO 6, im on my second walbro pump. For some reason its cavitating, theres no clogs, installed new filter, minimal rust. Im tryna find out why it's cavitating.
Have a question for you my tuner have told me to get 1440cc for the turbo I’m running (gtx3576r) I was wanting to get bigger injectors because the 2150cc are close for the price and way more room for fuel but was told are on 91 octane to not get bigger injectors because on the octane it would be hard for the motor to run on low rpms what do you think I should do? Run the 1440cc 1650cc, 1200cc, or 2150cc? Also the motor isn’t sleeved built head and forged bottom end
In ur case , my opinion doesn't matter. U know what I would recommend. It's mentioned in the vid. In your case you should listen to the person tuning u. As that person will have to deal with ur fueling.
@@dannynfs2983 I have FIC 2150’s and the car definitely runs rough on 93 pump at low idle (especially when the car gets hot) .. Sometimes it’ll bog off of the line just driving in normal traffic. BUT …. When these injectors are out on Ethanol (what I intended to do when I pieced this build together) the car runs and idles like stock. These injectors are absolutely made to run Ethanol. Can they run pump? Yes .. Do they like it? Not really. It’s possible, but takes a little more work on the tuning side, to make them run smooth on pump gas.
Y not just upgrade the stock wiring from the etacs to the pump and use the oem relays on the X. It's simple as just replacing the 14g stock wire with a 12 g wire..
Hello Alchemist please please take 1 minute of your time to answer my problem: My 2012 X MR has some jerking problems especially when WOT, lets say i floor the pedal and it feels like the car has no fuel for a split second then launches, it makes your body go to the windows first before to the seat if you know what i mean. I think my sst is fine, gears change fine, no slipping, super fast, no transfer case weird nose etc. Sometimes it will dont do it, but most of the time it does, when it doesnt and i wot is super fast. car drives super fine if you drive it normally and calm 🤣its just when flooring the pedal. Troubleshooting> Relays are fine engine compression test perfect, same on all 4 Changed spark plugs recently, ngk iridium this week changing the pump to the aem 320, after that illl see whats up, if it persist i was gonna change the injectors? in my country we have 98+ fuel notice> car has been driven 40k miles without swapping relays before, my first guess was the stock pump became faulty. any quick opinion? Thanks! everything else is stock except for my uicp wich is the ets, stock is ugly af
@@bdalchemist All stock, except for ETS Upper intercooler pipe, No tune. Bought the car with the issue 😅 i was guessing it was the fuel pump relay but i switched it and still
@@bdalchemist roger that, car runs completely fine and idles fine, it just hesitates when WOT, it jerks first then launches, super weird. Will change fuel pump, check codes, check tune (im pretty sure its untuned, even that might be the issue? might need tune for my proper type of fuel?) and come back. Thanks man!!
@@bdalchemist we in Germany has for hiigh horsepower cars only 102 Oktan on Pumpstation it would be akt nearly as e85 but is not that knock reliable we will see how much i get 700 is the goal =)
I run (2)255HP (pin pushed in to hold more pressure on both) walbro pumps in my evo 8 ,still stock ECU with a Stock return line.. both pumps are hardwired second pump kicks on with a hobe switch (kicks🦵on over 15psi).. also have an adjustable fuel pressure regulator with FIC 1650cc (best injector stainless steel internals unlike the FIC 2150)on E85. I don’t see a reason to upgrade the return line if the car is basically running on one pump, and when the car is full throttle, the engine is using most of the fuel .. I haven’t had a single issue with a stock return line making 900whp … you keep talking about upgrading the return line… You ever see inside of a stock rail and feed line.. I would be talking about upgrading the feed line before the return if anything, just speaking fax 📠 tried and true on my personal car I’ve owned and built it 9 years ago.
show me a universe where you are making 900hp with an evo with 1650cc injectors on ethanol on a dynojet and I will show you a universe where I'm Ronald McDonald
You bet your ass you can …You will be surprised I’ve been doing this since the 90s, my injector duty cycle is not happy but it can be done..The 1650cc FIC injectors actually cost more than a 2150 cc because they’re all stainless and can run any type of fuel… in my opinion doing it all these years. I think the best injector on the market is the FIC 1650 cc high Z’s all stainless internals…2150cc injectors are not …I set my adjustable, fuel pressure regulator to 53 psi at idle.. people going way too big on injectors, and only trying to make 600 horse 🐴 makes no sense
I love your 20+ minute videos and appreciate the time you put in to educate and share your wealth of knowledge. I am a new evo 8 owner, and am learning a ton. I have a built 04 Sti that I’ve done everything to myself on my driveway. I just installed a 340 with id1300s - shooting for just a fun weekend car high 400s low 500s
Thank, you. It does take Alo of effort on my part. Content is never the issue but it's always time.
BD thanks so much for this video. I have been digging in absorbing so much knowledge. I just got a stock evo 8, and ended up going with ID1300s, an aem 340 pump and currently stock turbo. I went with the 1300s to have a bit of room over the 1000s / 1200s as Im going FP black over the winter.
Plan to max the injectors for e85 but primarily run a 93 map as e85 is rare around here
the knowledge and wisdom being shared for free is insane!! keep up the great work! love these videos!
Thank you sir.
Finally someone who speaks up now do a video on each FP HANGER like ive had the Fullblown hanger which is garbage
I read many reviews on the forums and for a 93 and e85 the best injector I found was the ID1300X, combine that with a 450, S2 and a punchy fpgreen type turbo, that's my ideal set-up
That works
Lol that sounds like my setup.
Your a legend these breakdowns are clear and precise keep up the great work
Thank u sir
Great video man! Thanks for sharing your wisdom and experiences. Got a fairly stock E9 with the regular bolt-ons. Decided to go for the Walbro 255 and keep the stock injectors. Going for a dyno tune this summer. Not chasing big gains, just a reliable garage queen.
That's sounds awesome
Thanks for this, think I need to upgrade my return line, and add a pulse damper. I am running evo x built 2.2l stage 1 cams - 1650cc stainless Injectors. 525lph walbro, DW battery hard wire kit.aorund 500whp. The car hunts a lot and cuts out when i put my foot on the clutch all the time when driving around town. Hopefully the pulse damper and bigger return will help. Thanks mate 👍🏻
Sounds great!
A friend just turned me on to BD Alchemist. Already love this channel. I especially love how dude is so DTE. Wish I could get him to come to Japan to tune my Evo X 😂. Seriously though ... If you're ever coming to Japan, hit me up 😃
Sure will , but don't see that in my future
Just wanted to thank you for your time and video. As usual awesome content and informative
Thank u
Always a big fan nuff respect chemist 🇯🇲. Merry Christmas and happy new year when it comes.
Same here bro
Great video new to the evo 10 and this answers some?? Thx
Great information!
Thank u
Brilliant!
Very very very helpful video thank you
Your welcome
Love the content
Keep up the good job
Merry Christmas
Evo x owner
Thank u
Bro keep it up, you help us a lot with this information. 🙏🏻
tech in training, thank you sir
Thanks a lot bro
Very helpful
Thank u
thx for the great info beesh.
Subscribed. Do you have any evo 5 or 6 to make videos about or in the future?. I'm restoring one atm and trying to learn as much as possible. Hello from Australia
For a double pumper you said that you use a hobb switch. How about speedcircuit's secondary trigger kit that uses the no longer boost solenoid conector once a 3 port is installed.
That's new so I'm sure it would work. But traditionally it's hobbswitch for OEM ECU.
@@bdalchemist ok thanks
thanks for the great info. does the 450 require a hardwire ?
I would def hard wire it
@@bdalchemist good to know, thanks for the reply!
Maybe do a tech video on deleting that resistor module and installing ID 2100s. Also do you have a tech video or could recommend a tech video on that return line modification when upgrading to a larger single fuel pump?
What are your thoughts on inline FPD instead of mounted FPD on the rail? I have stock f rails so I was going to add a new feed line with a inline FPD.
Awesome content. I just picked up a radium hanger, Walbro 525, radium fuel line kit, radium rail with damper, radium afp regulator with gauge and fic 1650 injectors. Getting ready to turn it up more when I put in my kelford 214-b cams and kelford springs etc and arp head studs. Just gotta get my clutch pack for the sst still. Would you recommend the ssp 600, 700 or the jacks transmission 600 clutch pack. I can’t find many reviews on the jacks transmission ones and wondering if I would really need the ssp 700 or if the 600 would suffice.
Ssp
How high can you rev stock block and heads with s2 cams ? And what's the gain ? I have a 3576 on e85 on 29 psi
Great video! Curious, what makes you fond of the original id1000 over the new 1050x?
i dont think i said i prefer one over the other. if i did i meant that the 1000 has been around longer so its particulars are well known. the 1050x are good as well but i would go with fic 1200 for the $$
hello I have a lancer ralliart b411 block, with 400hp on wheels, but last week from parking I accelerated it to 7 k revolutions the car turned off and the whole system was on but the engine turned off and did not start I saw that white smoke came out pot the exhausts and a little by the engine! what could it be that my car won't start
Sounds like at very least u blew a head gasket. I would drop oil and maybe pan and check everything, not to me mention a leak down test.
Great content, Question.....do you see any advantages for running one big external pump like an aeromotive or magnaflow rather than 2 intanks for someone who's not gonna be replacing there oem gas tank to a fuel cell ?
If u run it with a surge tank yes
Hi, thx to you for wrapping it up quite simply. Maybe it just missed it, but which AN size do u use for feeding and return, assuming 450 or dual pump setup ?
8feed 6 return ,
@@bdalchemist thx
Could you expand on why the id1000 is your favorite? I am looking into upgrading my injectors and I happen to have a set of id1000 lying around
They are tried and true , the scalings are spot on. But they are no longer made
But u can do a single 525 rewired for above 600 too we use to do a single 450 rewired to hit 650-700
"you" can , but as someone who's going to do alot of cars and most of the cars will be driving by a laymen , we have to go with a sure thing. A single 450 can do 700 but at the edge. Same with 525
Will a 340lph with a fuel pressure regulator + ID1300 injectors work well with MHI 18k on evo x on e85
Yes
@@bdalchemist would you say it would be close to maxing out the fuel pump or would the turbo be the first thing to max out
That pump will deliver enough fuel to max out the stock block
So I've got 2150s and a buschur double pumper setup being e tuned currently and absolutely no matter what open loop SD or what ever he tries we can not get the car to richen up on tip in .... it's built head block and big turbo oversized valves and mivec delete exh side .. any help would be appreciated 🙏
Who's ur tuner and what have u tried so far. Also hard to say without seeing ur map. I will tell u this though. Recently (like last week), I have had to send back a set of 2150s do to malfunction. But it threw a code for it.
That’s kind of good, but how would you manage the minimum pulse time with ( 1.7 msec) on evo X stock ecu? The larger the injector - the more rough idle will be. Correct me if I’m wrong
There are tables for that
What are your thoughts on the walbro 525 in a evo 8/9?
They r good
Whats the whp limit on stock injetors and stock pump, running 93 octane and all the bolt ons?
Around 400
Hey I was wondering if you can help me out , so I recently bought an evo was goin to buy it as a shell and just have it as a project but the owner decides to throw in his new engine he blew his engine before so he bought a oem short block( it’s not stock) / he also got a tomei 2.3 stroker kit / PT6766 / Sheepy manifold / 2150 Fic ….etc ( everything is either new or brand new and there’s alot more just not tryna type ) anyways we just got to the fueling system it gots a radium double pumper with walbro 450s but I’m not trying to push a ridiculous amount of power I want around 500+ just so I can be somewhat street reliable but Ik with this setup It’s goin to need to be high hp so my question is cause I’m about to buy the relay kit for the pumps but would it be okay to have 450s and not even be at such high horsepower where I need them ? Or should I switch them out or just run 1 450? * I’m going to be making my own build on this car in the future so I want a 6266 or 6466 with a built 2.0 instead of 2.3 * Ik I typed a lot my bad but if you could respond I would appreciate it 🙏🏽
A single 450 is good for ,600-700 depending on injectors and lines.
At what point do you suggest upgrading the main fuel feed line? When is it truly required?
700+
Maybe more
Heyy bro, i have a walbro 255 on my EVO 6, im on my second walbro pump. For some reason its cavitating, theres no clogs, installed new filter, minimal rust.
Im tryna find out why it's cavitating.
What’s the Max whp from stock fuel system? 93 + meth injection
Have a question for you my tuner have told me to get 1440cc for the turbo I’m running (gtx3576r) I was wanting to get bigger injectors because the 2150cc are close for the price and way more room for fuel but was told are on 91 octane to not get bigger injectors because on the octane it would be hard for the motor to run on low rpms what do you think I should do? Run the 1440cc 1650cc, 1200cc, or 2150cc? Also the motor isn’t sleeved built head and forged bottom end
In ur case , my opinion doesn't matter. U know what I would recommend. It's mentioned in the vid. In your case you should listen to the person tuning u. As that person will have to deal with ur fueling.
@@bdalchemist ok great thank you for your opinion greatly appreciated!
@@dannynfs2983 I have FIC 2150’s and the car definitely runs rough on 93 pump at low idle (especially when the car gets hot) .. Sometimes it’ll bog off of the line just driving in normal traffic.
BUT …. When these injectors are out on Ethanol (what I intended to do when I pieced this build together) the car runs and idles like stock. These injectors are absolutely made to run Ethanol. Can they run pump? Yes .. Do they like it? Not really.
It’s possible, but takes a little more work on the tuning side, to make them run smooth on pump gas.
@@Motagraphy great thank you for the info this actually helped me a lot on choosing what injectors told run and to choose from I appreciate it!
None of the cars I have tuned with 2150s does that. Even the stock cars
What are thoughts of the ID 2600?
It works , but Id always has revisions and I'm not a hero
How much max power you think double 450s and 1650cc can make on a 2.2l 4b11 running e85 😬
I would say 700-750
Amazing video! Very informative
Any information on fuel pump wiring?
What can stock wiring handle and what pumps? Etc
Keep up the good work 👏
I would upgrade the power supply line anytime I upgrade pump
@@bdalchemist yeah awesome
Any more information on that ? What gauge wiring ? Relay kit etc for the DIY guys out there
buy the relay and relay kit Amazon for hella relay. 12awg is good I think. 30amp fuse.
Y not just upgrade the stock wiring from the etacs to the pump and use the oem relays on the X. It's simple as just replacing the 14g stock wire with a 12 g wire..
ansu pump gave me issues. burn my basket. slap a walbro 450 no more issues same tune
Hello Alchemist please please take 1 minute of your time to answer my problem:
My 2012 X MR has some jerking problems especially when WOT, lets say i floor the pedal and it feels like the car has no fuel for a split second then launches, it makes your body go to the windows first before to the seat if you know what i mean.
I think my sst is fine, gears change fine, no slipping, super fast, no transfer case weird nose etc.
Sometimes it will dont do it, but most of the time it does, when it doesnt and i wot is super fast.
car drives super fine if you drive it normally and calm 🤣its just when flooring the pedal.
Troubleshooting>
Relays are fine
engine compression test perfect, same on all 4
Changed spark plugs recently, ngk iridium
this week changing the pump to the aem 320, after that illl see whats up, if it persist i was gonna change the injectors?
in my country we have 98+ fuel
notice> car has been driven 40k miles without swapping relays before, my first guess was the stock pump became faulty.
any quick opinion? Thanks!
everything else is stock except for my uicp wich is the ets, stock is ugly af
Mod list ? Car tuned? Who tuned it ?
@@bdalchemist All stock, except for ETS Upper intercooler pipe, No tune. Bought the car with the issue 😅 i was guessing it was the fuel pump relay but i switched it and still
It's possible u do have a tune , and don't know it. But that sounds like mivec issues. It could be anything. U have codes ? Check there
@@bdalchemist roger that, car runs completely fine and idles fine, it just hesitates when WOT, it jerks first then launches, super weird.
Will change fuel pump, check codes, check tune (im pretty sure its untuned, even that might be the issue? might need tune for my proper type of fuel?) and come back. Thanks man!!
@@stev4452 yes that can be issue.
I have a 450 and 320 can I make a double fuel pump with that
Yes
@@bdalchemist yooo I appreciate bro I love your videos should post shorts more often
@@Sup_Evox def trying , just have too many hats on.
I will build my Evo SST to 700 whp soon, but my knowledge is weak in the modification and I am afraid that it will tamper with me in the shops.
Talk to ssp
i know in the Staates so much people drive e85 on build engines, but is it possible to say some stuff about 93 ore 98 ? maybe a round 700 hp
The most I would do is 125 per cylinder on 93.
@@bdalchemist we in Germany has for hiigh horsepower cars only 102 Oktan on Pumpstation it would be akt nearly as e85 but is not that knock reliable we will see how much i get 700 is the goal =)
@@bdalchemist butt really thank you for your advice :) your Channel is really great
I just tuned someone in Germany , made 780 on 75-80% ethanol
Dual pumper and 2000+ cc for 700+ setups
Where is your shop?
Illinois
The audio isn't working
Just checked , it's working on my devices
@@bdalchemist must've been a RUclips glitch. Works now
Do you have fb
Yes "BDAlchemist"
Damn that silver car is a pile of shit
Yes it was built by Gareeb newaz
I run (2)255HP (pin pushed in to hold more pressure on both) walbro pumps in my evo 8 ,still stock ECU with a Stock return line.. both pumps are hardwired second pump kicks on with a hobe switch (kicks🦵on over 15psi).. also have an adjustable fuel pressure regulator with FIC 1650cc (best injector stainless steel internals unlike the FIC 2150)on E85. I don’t see a reason to upgrade the return line if the car is basically running on one pump, and when the car is full throttle, the engine is using most of the fuel .. I haven’t had a single issue with a stock return line making 900whp … you keep talking about upgrading the return line… You ever see inside of a stock rail and feed line.. I would be talking about upgrading the feed line before the return if anything, just speaking fax 📠 tried and true on my personal car I’ve owned and built it 9 years ago.
show me a universe where you are making 900hp with an evo with 1650cc injectors on ethanol on a dynojet and I will show you a universe where I'm Ronald McDonald
You bet your ass you can …You will be surprised I’ve been doing this since the 90s, my injector duty cycle is not happy but it can be done..The 1650cc FIC injectors actually cost more than a 2150 cc because they’re all stainless and can run any type of fuel… in my opinion doing it all these years. I think the best injector on the market is the FIC 1650 cc high Z’s all stainless internals…2150cc injectors are not …I set my adjustable, fuel pressure regulator to 53 psi at idle.. people going way too big on injectors, and only trying to make 600 horse 🐴 makes no sense