I followed the instructions to a T and the setup is brutal. If I set my steering rods to the 44.5 mm they request my wheels are pointing in at each other it’s brutal thank you for this
Great video bro....recently started rc drifting I bought an mst ms 01.....didn’t like that so I bought a YD-2S ....works great....video helps a lot keep it up bro......
Thanks for a Great video. I have a yd2 that somebody at Vertex put together for me. I am not mechanically inclined, but this video has motivated me to try- on my next new chassis. For now, though....would you or someone be willing to make a good quality video on how to do the basic tune up and alignment & how to use the set up board. All I really know how to do is check and adjust camber.... Im the only female at the club. I could really use the help. Everyone is so busy with their own cars, I dont like to bother them...but I really want and need to learn.
I've learned all I have with help from others. It's so hard to know how to tune a car without the knowledge. I'll try to get a tuning video up in the future. I consider myself a beginner as well. I have learned simple tricks that can help with tuning- I wish you the best! send me an email, maybe I can help you through some tuning issues... sdemo8@cox.net
Why can't somebody just break it down to you it's simple and also is hard if you don't get help if you're running on carpet lay the shocks down go 250w oil on the shocks and on asphalt 200w stand the shocks. I run 5mm rear ride height 7mm front for carpet Asphalt I run 9mm front 7 in the rear👌😎👍 also tires make a difference I use hard compound for carpet and medium too soft for smooth concrete and asphalt,😎 hope this gives you help an estimate of what you need to do
Finally someone gives us detail overview in parts. Now I can build my first car wohoo thank you! Hmu if you have any recommendations for saving $$ if you recommend different parts or something
Great video! Thank you for the detailed explanation on why your settings are set how they are, very informative. I especially appreciated the information on the suspension! Im working on my RWD micro drift build & looking at 1/10th scale videos has been a treasure trove of information. Have you looked into micro drifting? It might be right up your ally 😸
How you get all that droop I've been trying to get it and I can't get it I put my rear rite-hite at 6 the front at 7 I get rear droop but I don't get no front droop can you help me out with that
nice video, whats the secret to having so smooth shocks? I have the plastic yokomos and if I lift the car up, the car stays up, tho if I put softer springs or adjust the preload the car bottoms out)=
Ok, thanks. I bassicly are on my own in this where I live and have no one to ask. I searched the internet but have not found an satisfying answer and tips´n´tricks.
Just getting into drifting, AWESOME video. I am waiting for the Yokomo YD2 EX II to be back in stock somewhere to order one and get in the game.
I followed the instructions to a T and the setup is brutal. If I set my steering rods to the 44.5 mm they request my wheels are pointing in at each other it’s brutal thank you for this
Charl south Africa thank you I only started drifting now , going to start with yokomo YD2 s good
Great video bro....recently started rc drifting I bought an mst ms 01.....didn’t like that so I bought a YD-2S ....works great....video helps a lot keep it up bro......
Thanks, I need to post more drift stuff!!!
Completely changing my set up thank you and adding a wi fi box but which one did you use and which app please ?
Thanks for a Great video. I have a yd2 that somebody at Vertex put together for me. I am not mechanically inclined, but this video has motivated me to try- on my next new chassis.
For now, though....would you or someone be willing to make a good quality video on how to do the basic tune up and alignment & how to use the set up board. All I really know how to do is check and adjust camber.... Im the only female at the club. I could really use the help. Everyone is so busy with their own cars, I dont like to bother them...but I really want and need to learn.
I've learned all I have with help from others. It's so hard to know how to tune a car without the knowledge. I'll try to get a tuning video up in the future. I consider myself a beginner as well.
I have learned simple tricks that can help with tuning- I wish you the best! send me an email, maybe I can help you through some tuning issues... sdemo8@cox.net
Why can't somebody just break it down to you it's simple and also is hard if you don't get help if you're running on carpet lay the shocks down go 250w oil on the shocks and on asphalt 200w stand the shocks.
I run 5mm rear ride height
7mm front for carpet
Asphalt I run 9mm front 7 in the rear👌😎👍 also tires make a difference I use hard compound for carpet and medium too soft for smooth concrete and asphalt,😎 hope this gives you help an estimate of what you need to do
Finally someone gives us detail overview in parts. Now I can build my first car wohoo thank you! Hmu if you have any recommendations for saving $$ if you recommend different parts or something
Can’t go wrong with Yokomo parts and Reve D. Give GGT in garden grove a call, he can give you ideas on where to save money and where to spend
Where did you get your KPI knuckles what website. & GGT
Who makes this dogbone protectors? Sounds useful for my rs4
Great video! Thank you for the detailed explanation on why your settings are set how they are, very informative. I especially appreciated the information on the suspension! Im working on my RWD micro drift build & looking at 1/10th scale videos has been a treasure trove of information.
Have you looked into micro drifting? It might be right up your ally 😸
You're very welcome!
im struggling to get my BL-WM to connect with my yokomo BL-SP4 esc any ideas
Very nice set-up video :D It will be helpful :)
Where did you get the s14 body. I heard that ap plastics makes one. Don't know if its any good
How you get all that droop I've been trying to get it and I can't get it I put my rear rite-hite at 6 the front at 7 I get rear droop but I don't get no front droop can you help me out with that
When you build your shocks- make sure your rebound is strong
I really like your setup I've been debating whether I buy the yd2 SX I have 2 yd 2 plus and the yd to E X fully hopped up
Hollywood Fresh if you decide to buy- contact GGT on Facebook- they have the full lineup of Yokomo products
Can I use any 2 channel radio system for my yokomo yd2s
nice video, whats the secret to having so smooth shocks? I have the plastic yokomos and if I lift the car up, the car stays up, tho if I put softer springs or adjust the preload the car bottoms out)=
Shocks should be the first upgrade... the plastic shocks are terrible
What are your dampee settings? Oil, piston holes. Also ride height front and back? Thanks!
It's at the end of the video. Oil is Yokomo 200 weight, stock piston holes, I never measure ride height. Just front higher than rear.
7demo7 oh. Sorry i never watch till the end. Good sharing!
You say you have the yokomo BL pro4 is it the pro for b or the pro 4N I see two different versions on the internet
Is it good to use Flysky RC transmitter cuz I'm thinking about buying the same YD2-S
No, the tx speed is not fast enough for drift. Go with a futaba or sanwa mt4
What battery do you run?specs on it?
Yokomo 2300- 4,000mah 2s
Wt ride height do you run
lipo battery connectors what type are they is it brand name
Can you tell me how to adjust the ackermann angel. I can't figure it out how to do it
It’s hard to describe- I’d find an experienced drifter if possible to help. In general adding toe out increases Ackerman
Ok, thanks. I bassicly are on my own in this where I live and have no one to ask. I searched the internet but have not found an satisfying answer and tips´n´tricks.
Hi , do you have tuning service ?I would love to send you my yokomo for tuning for fee.
I would contact Keith Kim at the track I go to. Look up GGT in Garden Grove California
@@7demo7review Thk you so much! I will try .
Thank you I will try it now
Can you help me out and tell me how you charge that LiPo battery it doesn't have a balance on the battery
I have a separate battery lead for my charger that has a balance lead
7demo7 are you talking about the one they sell at vertex with the balance connected to it at the other end it has a single black wire what is that for
The single black wire plugs into the battery pack usually between a positive and negative lead
7demo7 oh my God thank you so much I was trying to figure this out so bad I got it now thank you you're the best
Where do I buy the parts?
Give ggt a message via Facebook- the link is in the description
thanks!
Everything is good,
But the Body disign... terrible
That flag is worldwar 2
japanese flag.. most korean and
Many people hate that flag...
I’m half Korean- I know my history.... I don’t live in the past though...