Это видео недоступно.
Сожалеем об этом.
Bruni Mod 92 Berretta 92F Strip and Assembly
HTML-код
- Опубликовано: 10 окт 2018
- In this video I demonstrate how to strip and reassemble the Bruni Mod 92 (Berretta 92F Replica). Sorry the video is slightly out of focus, I didn't realise at the time, I may try to do this video again in the future if it recieves enough interest.
TOP TIP! Once the gun is reassembled, put the magazine back in (empty) and rack the slide back so it locks in the empty chamber position, the spring guide has a very convenient hole near the tip. Push something through that and release the slide catch, then push the locking bolt back in and pull what ever you used in the hole - out. Hey presto, your reassembled. Pull the empty magazine out and rack the slide a few times to make sure it’s all in properly. Pull all the way back and pull up to make sure it’s all correct
The Bruni made version of this blank firer does not have that hole. Only the Kimar made version does
Thanks. I was mucking about with my gun and realized too late that I didn't know how to reassemble the thing. You helped me out holms.
Thanks lot man saved my life from my father 😢😂
Awesome video mate! I fiddled with this thing for over an hour.
Great vid, it helped me out. Thanks. At the 03:50 mark I was struggling so I placed the lever in position while the gun was on its side and as I pulled the spring, it dropped into place. Was a fair bit easier!
Thanks and good tip!
Omg u saved me so much time, thank u man
Thank you so much
You're welcome :)
thanks a lot mate
Thanks very helpful 😃👍👍
Thanks!
Very usefull thanks alot
Thanks
Le meilleur pistolet
Possible de le mettre en balle réel?
well shown thnx
No problem, thank you!
Hey, I m trying to desassembly entirely the gun, but I struggle with the safety catch and locking lever : do you plan to do a video of complete disassembly ? Regards
Sir I have the same kind I think and it dropped and I'm trying to follow your steps that you have on this video and it will not go smoothly like you are doing it please tell me what I'm doing wrong I need help to put this thing back together it's not mine it's my husband's and he's going to kill me please not literally he's not going to kill me literally but I'm just saying you know got to be careful help me with this blank gun to put it back together thank you
Does it shoot holes from a distance?
I've got one of these 92f's from the 1990's but the holding lever got damaged when i stripped it, any idea where i could get spare parts for it?? Thanks, Good video by the way, liked.
Spare parts are incredibly difficult to get hold of. You can contact Bruni directly (they are an Italian company so dont often want to ship anything internationally) or thw UK distributor which I believe is John Rothery wholeaale. Your best bet is probably to buy a new one as they aren't very expensive
Can anyone who owns this gun help me ive recently bought this replica and every time i fire it the magazine flys out of the bottom of it with a ton of force also when i put a round in the chamber it tends to fail to extract the cartridge when i rack it and it also double feeds alot does anyone else have these problems with this replica and know what causes it ? It almost seems like the magazine sits too high up or maybe it is an extractor problem?
Can you Fire without a Pin????
price and where can i et . I stay in south Africa . any dealers locally
if your in the UK how do you own a fully black one?
I've got it today and kinda freaked out when I disassembled it and couldn't just re assemble it like the real gun, I thought I've broke it
I have the same type bruni pistol, but the tip is
sealed with a red cover, pls how do I remove that?
Hairdryer, use it on the barrel to make the glew flow again, take a hand drill, or a screwdriver and make it going into the plastic then pull it out
hey i need some help pls, when i try to assembly my bruni again, can't pull the spring, its like too tight, i tried to with a pliers and nothing...
Hi, it does take a bit of force but is usually do-able with a pair of pliers. I would start over, remove the Slide Return Guide and Slide Return Guide Spring. Then start the re-assembly from scratch, ensure the Slide Return Guide (the rod under the barrel) is seated correctly in its recess (it should sit almost flush with the bottom platform of the pistol) then ensure the Slide Return Guide Spring is all the way along the Slide Return Guide and that it is seated correctly within the slide. Then once you have the slide on pull the slide rearward to expose the tip of the slide return guide, you could then try gripping it with your fingers in a towel (to increase friction) and then pull it forward until you can see clearly through the disassembly pin recess under the slide, then insert your dissassembly pin and rotate it to lock it in place.
@@UKGuns no pliers needed. Just put a lighter in the space where the shell pops out and then u can easily pull the spring back. Easy peasy...
@@griffonsa if that works for you, but I wouldnt recommend holding a lighter to any part of the pistol for a number of reasons.
in the uk are you allowed to own a black side venting blank gun ?
You can own a top venting, not sure about side venting. As for colour, mine is a dark blue on the slide so not black. Not sure if two tone laws apply to blank fire guns. But I’m assuming it does since you can’t buy full black in the UK (not that I’ve seen)
What happens if you put a live round in it?
They are specifically designed so that you can not do that. The chamber isnt big enough to accept a live round but if you were stupid enough to find a way to make one fit the gun would likely explode in your hand as these are not made from the same material as a real firearm and thus are not capable of handling the pressure of live ammunition, also as the barrel is sealed the projectile would hit that and likely send debris back into the shooters face. I can not say this enough... DO NOT EVER TRY THIS. Also if you live here in the UK it is extremely illegal.
Too bad it is not 100% like a Beretta field strip even if it is quite similar but great blank-firing gun.
Agreed! Some obvious differences but for what it is, it's great!
In the manual it says to put on the saftety and then cock the slide. So is that a mistake?
I have never seen the manual but what I have seen is several of these with broken safety catches because when you cycle the slide with the safety engaged it forces the safety off. Do that enough times and the safety catch literally falls out of the gun. Seen it on at least 3 or 4 occasions.
@@UKGuns im honestly suprised i even got a reply on a 3 year old video hahaha. Yeah i recently bought one and for some reason it said to put it on safe then rack the slide. But i think it might be a translation mistake they made.
Also of you dont mind me asking questions do you know if real baretta grip plates fit i would like to costumize mine (cosmeticly)
Like costum grips for example. Id like wooden grips
@@HighMinds010 I always try to respond to sensible comments lol I'm not 100% sure about the grips, I know the Bruni 1911 grips are interchangeable with real 1911 grips as I know people who have swapped them. I also know the Bruni 92 fits in standard (real) Beretta 92 holsters so the dimensions must be very close but the question would be whether the screw holes lines up!
@@UKGuns intresting i imagine if they lined up for the 1911 they would also make the 92 as close to reality as possible so they might fit. I bet i have to give it a shot and otherwise maybe think outside the box and make them myself🤔
@@HighMinds010 let me know if it works!
What is the gun made off. Plastic or metal.
Metal, plastic would not withstand the forces from a Blank Round
Thanks.
Someone help my blank bruni 92 hammer wont slide back when I cock my slide and my bullets get jamed please help !!!
I got same problem, would like to get help too
Thank you please isit agood gun
There is no real Disassembly lever on mine. Only shape of lever and it is part of the body. Is there an another way to do this ?
Some of the early Bruni Models were not strippable and the disassembly lever was fixed in place. So far as I know there is no way to disassemble those versions sorry.
@@UKGuns Thanks. Is it possible to tighten top slide without opening it ? It is little shaky.
Pot metal piece of crap