50watt raycus fiber going to work engraving a quarter. 2 cutting passes followed by a cleanup of the entire piece. My hope is the cleanup pass will keep polishing to a minimum.
How do you learn this level of craftsmanship? All hard knocks of trial and error because I can't find any schools in So Cal and can't find any online training. I bought a 30w (want to upgrade it to 50w) fiber laser engraver about 2 years ago an still don't know how to use it. Being a noob Sucks!
If your hand's not at the focal point, with a 50-100 watt 1064 nm laser you'll just feel a little bit of warmth on your hand. If it's at the focal point, you're going to get burned, but nowhere near as badly as a CO2 (10600 nm) will because your skin reflects most light at 1064 nm, but absorbs most 10600 nm light.
Thanks for sharing your work! There is a question. If you are using a vector pattern, that means there will only be two heights on the medal - the surface and the bottom. Is there any way to get 3d relief with this laser?
Really just depends on how much material you can remove per pass. No way to control depth other than time/passes. Once you get to the depth you need you can rerun based on time and get pretty close each time.
Excellent job👌 I've got a stainless steel watch clasp, that's got a nice clean surface, would love a custom design on it. Could yous do that 🤔 and would it cost.. I can't find anyone to do it. This looks perfect what you do. 👌👍
wow wow wow! I'm in Canada and i think this ROCKS!!! id love to try this on my CDN quarters I know its not polite to ask Parms but can you pm me a hint please? I've got the same machine as you
@@seasidemetaldesign1472 Thank you for your reply. Could A 20watt fiber lasser(those expesive) make the job on gold, silver? Or I need at least 50watt?
@@seasidemetaldesign1472 Thanks for posting this. How can this be a 3d relief after a few passes? Is that because the tree branches are very thin and the edge melts slight so that it looks like a 3d? Or is this a 3d dynamic laser machine? Thanks!
If you are asking about the cleaning passes, try lower power high frequency, a tight hatching
The very best one,you are the master for it.
Hi, how deep can the engraving be achieved. And the price too
You can cut all the way through with enough time!
How do you learn this level of craftsmanship? All hard knocks of trial and error because I can't find any schools in So Cal and can't find any online training. I bought a 30w (want to upgrade it to 50w) fiber laser engraver about 2 years ago an still don't know how to use it. Being a noob Sucks!
All trial and error really!
what would happen if u put ur hand underneath
If your hand's not at the focal point, with a 50-100 watt 1064 nm laser you'll just feel a little bit of warmth on your hand. If it's at the focal point, you're going to get burned, but nowhere near as badly as a CO2 (10600 nm) will because your skin reflects most light at 1064 nm, but absorbs most 10600 nm light.
Thanks for sharing your work!
There is a question. If you are using a vector pattern, that means there will only be two heights on the medal - the surface and the bottom. Is there any way to get 3d relief with this laser?
Really just depends on how much material you can remove per pass. No way to control depth other than time/passes. Once you get to the depth you need you can rerun based on time and get pretty close each time.
@@seasidemetaldesign1472 Does this mean that you can't achieve 3d relief with one laser run and will need to send different commands several times?
Excellent job👌 I've got a stainless steel watch clasp, that's got a nice clean surface, would love a custom design on it. Could yous do that 🤔 and would it cost.. I can't find anyone to do it. This looks perfect what you do. 👌👍
wow wow wow! I'm in Canada and i think this ROCKS!!! id love to try this on my CDN quarters I know its not polite to ask Parms but can you pm me a hint please? I've got the same machine as you
what was your setting for the cutting pass? and for the clean up pass? please and thank you
What camera are you using to record?
How does it work? From a 3d scanner or manually?
Which settings to engrave and polish??
What are your settings please
where do you get such copper coin blanks from or is it a normal fiat coin, i have a laser myself and would like to try this for myself
Normal fiat coin, although there are blanks out there for sale
Yeh india mai hai???
Power
Speed
Frequency??
Good day. I want to know if you know of any color laser engraving system on aluminum. I await your response, the channel is very good!
laser can not color engraving on aluminum but stainless steel
hello, what kind of lens do you use?
Currently using a 300x300
I'd like to get one of these machine to photo engrave on silver or gold necklace medal.
So far it's been a fun toy but as we progress with it I'll be more comfortable in marking on expensive items such as those!
@@seasidemetaldesign1472 Thank you for your reply. Could A 20watt fiber lasser(those expesive) make the job on gold, silver? Or I need at least 50watt?
@@svsv9 sure, although if you are engraving into the metal it will be slower.
It’s 3d 50watt or 2d 50 watt machine
Where did you purchase the machine?
Through @DebinLee on facebook
50 watt ?
Machine price please???
hello, what is the speed and power for cleaning?
100 freq, 1500speed. 100 power
How long does it take to engrave the quarter at all?
All depends on how deep you are trying to go. Settings will vary as well, and focus needs to be adjusted as the material is lasered away
@@seasidemetal9834does 3d dynamic focus laser solve this problem?
Merhaba bu çok harika bende yapmak istiyorum bana yardımcı olabilir misiniz
how to mark again and again and finishing?
nice video
Select Continuous option.
How much?
This one sold for $30 if I remember correctly
Is that a 3d relief on that piece or is it a simple hatching of the background?
After several passes it ends up being a 3d relief.
@@seasidemetaldesign1472 Thanks for posting this. How can this be a 3d relief after a few passes? Is that because the tree branches are very thin and the edge melts slight so that it looks like a 3d? Or is this a 3d dynamic laser machine? Thanks!
אני רוצה לדעת אים יש לייזר תלת ממד פליז. כסף וזהב
What are rhe settings for cleaning passes?
High Frequency and low power