ATV Restoration! Restoring a Yamaha Moto 4 200 | Part 1!

Here's to a new direction on the RUclips channel! Today we're starting a full restoration on the Yamaha Moto 4 200 that we just got running not long ago! This is part 1 out of a 3 part series. In this video we start with a fully assembled and running quad and we tear it completely down to the frame and paint it and get the rear end restored and installed!
If you like what we're doing here at Toy Shop and would like to support us then be sure to check us out on Patreon! www.patreon.co...
Toolbox Widgets
1/4" drive Socket Widget - a.co/d/29Ux2rs
3/8" drive Socket Widget - a.co/d/5cCi3mT
1/2" drive Socket Widget - a.co/d/8EsPl9s
Screwdriver Widget - a.co/d/5F7EB5Y
Wrench Widget - a.co/d/0qyVzIM
Wide Motorcycle Scissor Jack - a.co/d/fQLQypt
Narrow Motorcycle Scissor Jack - a.co/d/cGDv73u
Umbilical tank setup;
Moton Pro Aux Tank - a.co/d/2hMd2xe
IV Stand - a.co/d/hHiSSGU
Metric #2 Phillips - a.co/d/1qhV0me
Slide Hammer - a.co/d/e8bu3yW
Camera I use to film - a.co/d/9d39Jjm
Mic I use - a.co/d/0V4vNZ7
Visit us at www.toyshop966... to see what we're up to and to check out everything Amsoil has to offer!

[@RippenSXS]

That's gonna be sweet.

[@ToyShopRestorations]

Thanks! I’m excited to see how it comes out!

[@sdc9593]

Wow so organized that is a great way to do restorations. Is this machine good enough to be worth all the effort?

[@ToyShopRestorations]

Thanks! And ya… about that… no it’s not. But this is a learning curve and I don’t want to ruin a machine that’s worth a lot of money by doing a bad job. So I’m doing it to this moto 4 as practice.

[@Welcome_to_me_mudding_mowers]

I really wanted to watch you tear it apart 😢😂

[@ToyShopRestorations]

It was just a bunch of ugga duggas. 😂 it actually went pretty quick like 2 hours to get all the big pieces apart.

[@Welcome_to_me_mudding_mowers]

@@ToyShopRestorations yeah, I just wanted to see because I’m tearing mine to the frame and I wanted to see how easy it is

[@ToyShopRestorations]

@@Welcome_to_me_mudding_mowers oh gotcha 😅 have a nice big area to be able to lay stuff out really nicely and make sure you label bolts as you go!

[@jakemontgomery6701]

I'm struggling to find the correct bearings and dust covers for the rear axle. Could you share a link or part#s for the axle carrier bearings please?

[@ToyShopRestorations]

www.ebay.com/itm/401977861307?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JrRin3IFTMq&sssrc=4429486&ssuid=39xyh32ctx6&var=&widget_ver=artemis&media=COPY
Here’s one on eBay. The dust cover though might be harder to find. Try www.partzilla.com for that

[@ToyShopRestorations]

www.ebay.com/itm/401977861307?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JrRin3IFTMq&sssrc=4429486&ssuid=39xyh32ctx6&var=&widget_ver=artemis&media=COPY
Here’s one on eBay. The dust cover though might be harder to find. Try www.partzilla.com for that

[@s10blackwidow]

Hello there I have a question? I have this same atv and my question is of the rims, would the Yamaha moto4 warrior aluminum rims fit on your or my atv??? Please let me know. Cause I want restore my moto4 by updating its look too.

[@ToyShopRestorations]

Hmmmm that I’m not sure about. 🤔 I’m not gonna be much help. I don’t have a warrior to compare to

[@s10blackwidow]

Oh forgot to say that mines 4 lug in the rear not 3.

[@isaacruiz7834]

can you post a link of where you purchased your top end.
thank you

[@isaacruiz7834]

i have the same atv it’s been sitting for a while and oil started coming out from the carburetor so i’m guessing a top end would do

[@ToyShopRestorations]

The video I made of me rebuilding the top end has all those links! Hopefully they still work!

[@ToyShopRestorations]

Oil doesn’t usually come out of the carb 🤔 maybe the crankcase breather hose is dumping oil from the motor into the airbox? Check your oil level and make sure it isn’t over full!