Is there a possibility to bind the LEDs to the status of certain buttons in the simulator? Since this is an MCP style module, it would be useful to check this lights and get an idea of the status in the sim.
FSM-GA and MFH setup, done! SEM and THQ installed and calibrated. Now I need to figure out what the FSM-GA is used for in MSFS2020. Bindings, anyone? Thanks in advance.
Is the USB-to-4pin supposed to be included? Mine only came with the USBC-to_USBC connector. UPDATE: Never mind. I have all the components needed. Panels all set up now.
Love my FSM-GA! As far as customizing the LED indicators, is it possible to make it so when autopilot is disabled, other buttons like HDG, NAV, ALT for example also turn off their lights? Would be such a nice feature and add to realism!
@@MarcJMusic The problem is that the FSM-GA doesn't get attached to the sides of the Gladiators, only the SEM and THQ are. A classic setup for the Gladiator NXT would be a FSM-GA on top of a MFH and on the desktop side a SEM or THW linked to the Gladiator.
Yes and no. Yes, because you can connect them. No, because you can't directly attach the FSM to the EVO, only through a MFH and another module. Please join our Discord server for more details.
Yes, you'll need the following parts: the SEM (vkbcontrollers.com/?product=gnx-sem-side-extension-module), the FSM-GA (vkbcontrollers.com/?product=gnx-fsm-xxxx-extension-module), the MFH (vkbcontrollers.com/?product=gnx-mfh-multi-function-holder), a GNX HID controller board (vkbcontrollers.com/?product=gnx-thq-usb-controller) and this cable (vkbcontrollers.com/?product=bus-type-c-jst2-0-4-interface-cable). For assembling advice please visit our forums forum.vkb-sim.pro/index.php
This really looks good on my desktop, but without functionality due to lack of guide for binding/mapping for flight instrument on MSFS2020, is this $119.00 plus shipping purchase really worth it? I might have missed it so please can anyone point me in the right direction. Thank you in advance. Happy (Sim) flying,
I am sorry, but there are so many joystick + modules combinations and also so many planes it would take forever to make guides for each one of them. Best thing to do would be to see what controls are mandatory for a certain plane, bind them yourself and go from there with the secondary controls.
You need to change the Subaddress only if you have several of the same type of module in your build, so it won't help you with the 32 buttons limitation. We'll have to show you some charts, so please come on our official forums with this question forum.vkb-sim.pro/
Не могли бы вы поделиться пресетом назначения клавиш FSM-GA для MSFS 2020 ? Could you please provide the preset of FSM-GA keys for MSFS 2020? Thks in advance!
@@VKBSim good answer :) So, that was my request - Maybe somebody has ready example (preset) of assigned keys for MSFS2020 (screenshot maybe). Thank you!
Can’t wait for TECS!
Awesome this is the video that explains a lot of my questions for the new modules! Already ordered...can't wait for it to get here!
Is there a possibility to bind the LEDs to the status of certain buttons in the simulator? Since this is an MCP style module, it would be useful to check this lights and get an idea of the status in the sim.
Nice looking setup 😀
hmm at 2:07 it says 6 mm screws but the ones i got are 8 mm, is this a typo or has it been changed in later batches?
Either way you're fine, no worries.
@VKBSim yup all assembled and feeling great now :)
Was super helpfull up until I realised you sent me the wrong parts to mount it! Thanks! Looking forward to waiting forever to get this resolved!
Sorry about that! But please fill up a service ticket with pics of the wrong parts and the issue will get fixed fast.
FSM-GA and MFH setup, done! SEM and THQ installed and calibrated. Now I need to figure out what the FSM-GA is used for in MSFS2020.
Bindings, anyone? Thanks in advance.
Is the USB-to-4pin supposed to be included? Mine only came with the USBC-to_USBC connector.
UPDATE: Never mind. I have all the components needed. Panels all set up now.
Love my FSM-GA! As far as customizing the LED indicators, is it possible to make it so when autopilot is disabled, other buttons like HDG, NAV, ALT for example also turn off their lights? Would be such a nice feature and add to realism!
This could be done through the LEDs panel. A bit complicated, but you could get assistance on our discord server discord.gg/UJAdpdHpYm
How do you mount it to the table so it doesn't move around while you're using the throttles.
Are the buttons rubber or plastic?
Can I upgrade the firmware on the GNX FSM-GA?
Which is the correct file for updating? Thanks.
If it works and you're not huge into programming there's no need to update the firmware at all.
What about it's connectivity to the Gladiator NXT Premium? I have 2 Gladiators.
No worries, there are more videos to come so you could see how to attach modules to your joysticks.
Awesome.. Cus ummmmm, I kinda already ordered it... 😓😓
@@MarcJMusic What other module you've got with it?
@@VKBSim just this one to use with the Gladiator NXT premiums. I also ordered the GNX USB Controller.
@@MarcJMusic The problem is that the FSM-GA doesn't get attached to the sides of the Gladiators, only the SEM and THQ are. A classic setup for the Gladiator NXT would be a FSM-GA on top of a MFH and on the desktop side a SEM or THW linked to the Gladiator.
VKB Gladiator nxt and FSM-GA, can I connect them and use them as one device?
Yes and no. Yes, because you can connect them. No, because you can't directly attach the FSM to the EVO, only through a MFH and another module.
Please join our Discord server for more details.
Hello, is possible connect the FSM-GA to a GNX SEM and connect to computer?
Yes, you'll need the following parts: the SEM (vkbcontrollers.com/?product=gnx-sem-side-extension-module), the FSM-GA (vkbcontrollers.com/?product=gnx-fsm-xxxx-extension-module), the MFH (vkbcontrollers.com/?product=gnx-mfh-multi-function-holder), a GNX HID controller board (vkbcontrollers.com/?product=gnx-thq-usb-controller) and this cable (vkbcontrollers.com/?product=bus-type-c-jst2-0-4-interface-cable). For assembling advice please visit our forums forum.vkb-sim.pro/index.php
are the led indicators in sync with whether a mode is engaged? - using msfs pmdg 737
They are not. But they are configurable, so you could program them ruclips.net/video/7pCr50-KRrU/видео.html
This really looks good on my desktop, but without functionality due to lack of guide for binding/mapping for flight instrument on MSFS2020, is this $119.00 plus shipping purchase really worth it? I might have missed it so please can anyone point me in the right direction. Thank you in advance. Happy (Sim) flying,
Can you make a video of how the buttons are configured with MSFS2020?
I am sorry, but there are so many joystick + modules combinations and also so many planes it would take forever to make guides for each one of them. Best thing to do would be to see what controls are mandatory for a certain plane, bind them yourself and go from there with the secondary controls.
FSM-GA, How to use subaddress 2? My game limited 32 buttons.
You need to change the Subaddress only if you have several of the same type of module in your build, so it won't help you with the 32 buttons limitation. We'll have to show you some charts, so please come on our official forums with this question forum.vkb-sim.pro/
Когда примерно появиться в продаже - VKB Gladiator NXT ?
Не ранее чем через две недели.
my Star Citizen ship purchases have to wait .....! I have to think about what my cockpit should look like first;)))
Не могли бы вы поделиться пресетом назначения клавиш FSM-GA для MSFS 2020 ? Could you please provide the preset of FSM-GA keys for MSFS 2020? Thks in advance!
I'm sorry, but there's nu such thing. In order to work, the controls should get assigned to game functions.
@@VKBSim not clear for me, please explain
@@forester7294 You will have to bind the device in game, assign the buttons to the controls you need.
@@VKBSim good answer :) So, that was my request - Maybe somebody has ready example (preset) of assigned keys for MSFS2020 (screenshot maybe). Thank you!
@@forester7294 For that I would suggest MSFS specialized forums or discussion groups, as there are many planes, each with different controls.
Когда только продажи на Али начнутся? ...
Еще несколько дней, пожалуйста.
ordered this and only found out I need a typec to JST cable to wire them together....
Super lame its not included with the GNX HID controller.
ahh ......... need one more rotary encoder for SPEED