Let's us share this video ALL Over the internet brother. This is a very important matter, which Tarun bro discovered with his daily, on hands experience working on Engines.
this is what we call real influencer......but sad part is people are blindly following so called influencers who doesn't even know basic motorcycle maintenance and do ride with folded and no mirrors, rev bombing near girls, lose(with no proper slack) and dry chains, etc....
Vikas sir and tarun brother... Now much thanks we say to you guys it's less... This is the only channel where clear cut information is served...! Love you sir and brother... You guys are our heros ✨✨✨
Rite time rite video for me. My bike done 55000 km thinking about engine flush after watching this video I don't even think about it. Thank you Anna for informative videos. Keep educating the bikers.
Personally I don't recommend engine flush for smaller segment motorcycles, I once did that on my 12 year old CB Twister 110. All the major oil seals were damaged.
to clean sludge, oil solvency is much more important than detergent. If you want to clean the engine, using grup 1 oil work better than engine flush. better if you mix it with palm oil or corn oil
Bro really thanks for the video. Even i thought of using engine flush on my motorcycle. But your video helped me to avoid using engine flush. Please keep posting more informative videos like this. Please let me know can we use engine oil additives while replacing new engine oil
Hello sir my bike is royal Enfield Thunderbird 350x which I have riden about 42,000kms I do service my bike at correct intervals. But now my bike burns engine oil for 500kms 150ml oil is getting used. I have also checked my rubber gasket their is no oil leakage from anywhere but still my oil level goes down. Please tell me solution for me. I never used any engine flush till now. I am totally confused state
great stuff vikas. whats your opinion on engine additive like Liqui Moly Motorbike Oil Additive MOS2 Shooter? i use 2X20ML whenever i put new engine oil and my ktm250 duke feels smoother including gearshifts . i have done 23,000 kms so far , and at the speed of 65kmph my ktm shows 52kmpl on highways . but in the long run does Oil Additive MOS2 Shooter harm the engine?
Absolutely true I am also thinking about this sometime old engine are running due to this carbon deposit of you remove them they will start leakage compression and all rubber parts will get worse
As always nice content👌 But what about the Engine Oil Additives and Petrol Additives specially in KTMs? And exactly after how much Kms Engine Oil must be changed?
Ill tell you my opinion I think ull find it makes sense.. If ur going to buy an additive consider putting it in after the oil has passed its half km usuage. At that time the oil is already slightly worn out and the additive will help.
Can i use racing oils like motul 300v Or 300v2 in my Duke or should i go for 7100 only?? Is there any major difference between racing synthetic oil and normal synthetic oil?
synthetic oil can make piston ring stick to the piston, causing compression loss. Engine flush leftover in the engine (oil do not fully depleted during oil drain) will make this much much worse.
I have a motorcycle with 2000 miles. It was running perfectly. After the first service it was running perfectly. After the second service it now makes a knocking noise that start 35 seconds after I start it. The dealership just changed the oil but it’s already black. There are no other strange noises other than the knocking. The oil is black after only 3 hundred miles. Why is it knocking and why is the oil black?
Why I am not getting any notifications from you, nearly I stopped watching your videos from Covid due to the bad notifications or only I am facing this issue!!!!! Today suddenly I am watching random bike video’s suddenly I remember you and Lucky me still I remember your name. As usual always sensible video to the fellow commuters 🙏🏻🙏🏻🙏🏻
Please tell this to all the "influencers" who are spreading nonsense all over.
Let's us share this video ALL Over the internet brother. This is a very important matter, which Tarun bro discovered with his daily, on hands experience working on Engines.
this is what we call real influencer......but sad part is people are blindly following so called influencers who doesn't even know basic motorcycle maintenance and do ride with folded and no mirrors,
rev bombing near girls, lose(with no proper slack) and dry chains, etc....
This is an Important information for all the Motorcycle Lovers across the world. Thankyou Vikas Sir for making such an informative Video.
Thanks a ton brother
Vikas sir and tarun brother... Now much thanks we say to you guys it's less... This is the only channel where clear cut information is served...! Love you sir and brother... You guys are our heros ✨✨✨
Thank you very much brother!
Rite time rite video for me. My bike done 55000 km thinking about engine flush after watching this video I don't even think about it. Thank you Anna for informative videos. Keep educating the bikers.
Personally I don't recommend engine flush for smaller segment motorcycles,
I once did that on my 12 year old CB Twister 110. All the major oil seals were damaged.
Nice informative video. Was about to 11:55 flush my old activas engines through some equipment in a workshop which I feel shouldn't be done.
to clean sludge, oil solvency is much more important than detergent. If you want to clean the engine, using grup 1 oil work better than engine flush. better if you mix it with palm oil or corn oil
I think this information was already out especially for cars and the same thing applies here as well.
Thanks for spreading this to a larger audience
Next, need info on 4t shooter or additive that is added to fuel tank.
Sure brother!
Sir please one podcast on
"Engine Oil And Coolant Mixing"
And How to avoid it, what are the precautions to be taken!
don't use synthetic oil, use better coolant.
Bro really thanks for the video. Even i thought of using engine flush on my motorcycle. But your video helped me to avoid using engine flush. Please keep posting more informative videos like this. Please let me know can we use engine oil additives while replacing new engine oil
Hello sir my bike is royal Enfield Thunderbird 350x which I have riden about 42,000kms I do service my bike at correct intervals. But now my bike burns engine oil for 500kms 150ml oil is getting used. I have also checked my rubber gasket their is no oil leakage from anywhere but still my oil level goes down. Please tell me solution for me. I never used any engine flush till now. I am totally confused state
Nice to recall this info after a long time. This stuff suddenly become popular in recent time
Pls make a video on properly rebuilding an old engine with new components. Do's and Don'ts
Can you please talk about ktm rebuilds and how to do them and what is the procedure it will be very helpful as I am planning to buy a bs4 ktm rc 390
Sure brother!
Make a video on Engine decarbonization. Much needed one
great stuff vikas. whats your opinion on engine additive like Liqui Moly Motorbike Oil Additive MOS2 Shooter? i use 2X20ML whenever i put new engine oil and my ktm250 duke feels smoother including gearshifts . i have done 23,000 kms so far , and at the speed of 65kmph my ktm shows 52kmpl on highways . but in the long run does Oil Additive MOS2 Shooter harm the engine?
Absolutely true I am also thinking about this sometime old engine are running due to this carbon deposit of you remove them they will start leakage compression and all rubber parts will get worse
thanks for the info❤
but what about the Mos2 engine oil additive ?
is that safe or useless.
I shall discuss this with Tarun bro and update you brother! Thank you!
What about using diesel or tarpin oil for flushing
As always nice content👌
But what about the Engine Oil Additives and Petrol Additives specially in KTMs?
And exactly after how much Kms Engine Oil must be changed?
Great point!
Ktm refers fully synthetic oil. Easily lasts 6-7k kms. You can change it every 7k once.
Modern engine oils are very long lasting.
Ill tell you my opinion I think ull find it makes sense..
If ur going to buy an additive consider putting it in after the oil has passed its half km usuage. At that time the oil is already slightly worn out and the additive will help.
Thank you soo much for sharing the content like this. I was not missing your podcast series 💯💯❤❤
Vikas Sir is THE BEST 🙏❤️
next video make it on ,do we need MOSO2? waiting!!!!
The morale : Either use Engine flush on regular intervals say every 15k KMs or don't use it at all !!
Can i use racing oils like motul 300v Or 300v2 in my Duke or should i go for 7100 only?? Is there any major difference between racing synthetic oil and normal synthetic oil?
great video, what about fuel additives?
Thanks brother. Will update you about fuel additives soon.
synthetic oil can make piston ring stick to the piston, causing compression loss. Engine flush leftover in the engine (oil do not fully depleted during oil drain) will make this much much worse.
Make video on liqui moly Mos2 . please
Hi vikas sir please make more videos like this,i met you in the bank few years ago, thankyou so much for selfie,Big Fan❤️
Can we use it in New bikes and will it help in clearing the metal shavings from the engine or we have any other way to do it.
I have a motorcycle with 2000 miles. It was running perfectly.
After the first service it was running perfectly.
After the second service it now makes a knocking noise that start 35 seconds after I start it.
The dealership just changed the oil but it’s already black.
There are no other strange noises other than the knocking.
The oil is black after only 3 hundred miles.
Why is it knocking and why is the oil black?
The engine flush will also clean your clutch plates effectively causing too much friction between them. It will destroy your clucth.
Could u also make more informative videos on dominar 400 ug. Really great content!
Any openion about using Fuel X on a dominar 400 2022 model? Will there be any change in vibration?
I had used engine flush only once in my KTM that also when the coolant was getting mixed in the engine oil around 22000 kms
Hey, vikas what about engine oil additives like
Abro oil treatment?
I learned about this detergent thing in oils when i wanted to change oil of my pressure washer
Washer uses non detergent oils
Bajaj flush my engine on my 1st service of D250 which was 450 kms old.. now what would be the scenario for the new bike now
This video deserves a like, share and subscribe
Thanks for such informative content bro! Always loved learning stuff from your uploads.
Want more podcasts with tarun👐🏻
Are aap mumbai me kabhi service centre dalo... mereko honda shine service karni hai... I am you tooooo old subscriber
Very useful and informative video!
Why I am not getting any notifications from you, nearly I stopped watching your videos from Covid due to the bad notifications or only I am facing this issue!!!!!
Today suddenly I am watching random bike video’s suddenly I remember you and Lucky me still I remember your name.
As usual always sensible video to the fellow commuters 🙏🏻🙏🏻🙏🏻
Thanks for the support brother
Liqui Molly 4t additive shooter is also bad ?...🥺
We will discuss this soon brother
Thank you sir.great informative videos
What is the service center name and location of this person?
+91 80743 14034 Tarun. Please call him brother. Thank you!
I have been waiting for this video finally thank you sir
Thank you brother!
Very crucial information inseminated..
You didn't reply to my question on decarbonising.
Hey brother, sorry, what is the question?
Again,first one to like and comment.And lots of love for your efforts and work❤️
Thank you so much 😀 Brother!
Great topic. Everyone should know.. 👌
Thanks brother
Thank u so much for this informational video
What about mileage increasing liquid?
Absolutely correct 💯.
Tvs service centres forcing to use flush. Says tvs recommended
Vikas sir I've seen ur video about decorbanization is it ok yesterday i did it my bike has done 48k
Yes brother, that is fine :) Thank you!
This important factor about Engine Flush; we got to know because of Tarun brother!
Decarbonization is just waste of money. If you really want to get rid of carbon deps, you have to open engine
Thank you sir !
Omg after a long time
Thanks brother!
but in new bike, there is no carbon
Bro ur garage location
Alwal, Hyderabad. Please type in Google: MotoGod . Thank you!
U know what is the best engine flush? Coca-Cola! We have tried and it gave best result! ! Nice video though ❤
Good information bro
Thank you so much 🙂
VALUABLE INFO
Thank you brother!
❤👍
👌