Fantastic tutorial thank you so much! If you increase the writing the last letter may not swell, here is the solution: in the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
Thanks so much man, insanely helpful! The only part I couldn't get to work was the weight-based shaders at the end but they're not essential to my project.
Awesome Tut 🤘I think there is one step missed, you have to be on the last frame when you apply the cloth and remesh modifier...💎💎 then when you add the second cloth modifier it locks it in as frame zero. 👽👽
I have a problem at 10:20. I'm on Blender 4.2, the latest so far, and my Capture Attribute node 1) doesn't have a Value property 2) It won't connect to the Group Input and Group Output nodes. I can attempt to connect them, but then those lines just "disappear" without connecting.
my text inflated a little bit , you can barely see it, even tho i put the same numbers you used, what should I change so that the inflated effect looks better
@@Valerio_Errani im very new to blander, not sure if this is the right way. But it worked for me. on geometry node, i just added (shift+A) value and connect the socket to the grey sockets. then you can see that the value sockets appear.
I don't have this panel that you bring up at the beginning, there are only three tabs. And when I press the tab key, the search bar comes up. There's also no “screen Keys” in the search. I can't even fix the test. can anyone help me?
My text will inflate perfectly but will inflate from a normal text looking object instead of the balloon one. It goes from the normal unchanged text to become the balloon one but I want it to start as a deflated balloon and inflate from that. Help?
its because at 4:10 when you apply remesh and cloth modifiers you are probably at around 0-5 frame. If you apply those while on frame 60 for example you'd get the effects just like in the video
Hello boatar5de, my friend Blender suddenly started to put the reference image with an orange and transparent outline, can you tell me what it would be and how to solve it.
Fantastic tutorial thank you so much! If you increase the writing the last letter may not swell, here is the solution: in the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
Thanks so much man, insanely helpful! The only part I couldn't get to work was the weight-based shaders at the end but they're not essential to my project.
Awesome Tut 🤘I think there is one step missed, you have to be on the last frame when you apply the cloth and remesh modifier...💎💎 then when you add the second cloth modifier it locks it in as frame zero. 👽👽
How to lock
Thank you so much for your wonderful tutorial!! It is amazing!!!
Your welcome bro… watch more amazing tutorials
Cool tutorial, thanks!
Thank you so much… watch more amazing blender tutorials ❤️❤️
I have a problem at 10:20. I'm on Blender 4.2, the latest so far, and my Capture Attribute node
1) doesn't have a Value property
2) It won't connect to the Group Input and Group Output nodes. I can attempt to connect them, but then those lines just "disappear" without connecting.
hii
how did you solve that problem?
i have same trouble
i have the same issue
This is one of the best types of effects I have seen. Great work. Thanks for sharing. :) BTW your accent is awesome... ;)
Thank you! 😃
Could you show how you exported it to show the camera tracking across ?
Thank you so much, you’ve made such a nice tutorial! The only thing that is nicer is your model 🙂
Thank you too! ❤️❤️
Thankyou //Это СУПЕР полезный УРОК💡
Very beautiful work brother
Thank you so much 😀
भाई मैने आपको Instagram par ek Chhota questions किया है
@@ex-secular-4996 fir se msg karo
@@FattuTutorials hii
guys thank you
Hey, on new blender theres no value option on Geometry Nodes Modifier , how to do it ? Thanks ! :)
Great work
Thank you! Cheers!
Thank you very much!
You're welcome!
NICE!!!
Thank you! Cheers!
my text inflated a little bit , you can barely see it, even tho i put the same numbers you used, what should I change so that the inflated effect looks better
Harika tek denemede kusursuzca yaptım bunu başka bir projede zemin olmadan alembic abc olarak aktarabilirmiyim.
12:28 Geometry mode isn't same anymore, can't find output and value attributes
have you found the solution?
@@Valerio_Errani im very new to blander, not sure if this is the right way. But it worked for me. on geometry node, i just added (shift+A) value and connect the socket to the grey sockets. then you can see that the value sockets appear.
@@isfree7958It worked bro thanks 🤧
Looking for this too - anyone figure it out yet?
Я нашла решение 🎉
Geometry Nodes is now different - step at 12:08 - anyone know what to do here now?
same question
how do I seperate the letters? just need single letters for a still picture
I don't have this panel that you bring up at the beginning, there are only three tabs. And when I press the tab key, the search bar comes up. There's also no “screen Keys” in the search. I can't even fix the test. can anyone help me?
Thank you
You're welcome 😊
I added more words and may text only inflates a little, anything I can do to make sure it inflates al the way?
In the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
I used the effect on a long word, and it doesn't inflate the last two letters. How can I fix this problem?
FIXED? SAME PROBLEM
@@totoriina8363 In the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
My text will inflate perfectly but will inflate from a normal text looking object instead of the balloon one. It goes from the normal unchanged text to become the balloon one but I want it to start as a deflated balloon and inflate from that. Help?
having the same issue
its because at 4:10 when you apply remesh and cloth modifiers you are probably at around 0-5 frame. If you apply those while on frame 60 for example you'd get the effects just like in the video
What should I do since my text can't all blow up, there are some characters not inflated:((( Pls help!
FIND EXPLANATION?
In the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
in my text, the last character is "%" and it doesn't inflate, what could be the problem?
In the step at 7:08 enter a value of at least 15 in both fields and perform the Bake again.
Why do the examples at the beginning and end look different? In the beginning, the balloons have various lines on them, but at the end they don't.
hi i need help i don't have all these windows opening in the side for the screen cast where i can find it ?
Go to Edit > Preferences >Get Extension > Allow Online > type in Screencast Keys and hit install
This is awesome! But when i finished part one my deflated text kept drifting or sliding away
Hello boatar5de, my friend Blender suddenly started to put the reference image with an orange and transparent outline, can you tell me what it would be and how to solve it.
Hi I have a collision issue with cloth simulation blender can anybody help me please
Чудовий проект! Дуже дякую Вам, підкажіть чомусь виникла проблема з надування тексту, тобто відбувається не поступове надування, а одночасне
На человеческом пиши
I've tried to follow each step (even when my blender is in spanish), but I can't deflate the text 😅😅😅
But I'll try more
I couldn’t either. Did you find the way how deflate the text?
i am trying again and again but not working
Hello, how can I get the "screencast keys " menu?, I don't have it by default
->addons
I didn’t find it too wth
You have to download and install it into Blender, github.com/nutti/Screencast-Keys/releases
Go to Edit > Preferences >Get Extension > Allow Online > type in Screencast Keys and hit install
brother can i do this on my shitty laptop with 16gb ram
thanks! My plane is also falling by gravity...
blender keeps crashing while rendering - help????
hopaa !!
project file pls
aoa can uh writte my name in blender plz
Please help me. I have a phrase and the last word doesn’t inflate. What’s the problem?
@erenyldrm8090 I found the solution. The step on 7:09
Try to take more than 10 (I took 15). It worked.
It doesn't fix the problem even if I put 100.@@nupoluchite
Check ✅
my bake lasts 40 minutes
Yes bro … same … bake takes lots of time so don’t worry 😉
Ok, thanks! ♥ @@FattuTutorials
help me cool tut