Does Your Wiring Suck? TRY THIS!
HTML-код
- Опубликовано: 2 июл 2024
- Diy Bri Shows you how with his favorite 12 volt wiring tips. If you do any type of wiring to your boat, side by side, truck, off road machine or stereo system, these wiring tips will help increase the productivity and quality of your wiring project.
The wire striper I use amzn.to/3z599g2
The crimp/wiring cutting tool I use amzn.to/3B65y1I
Solder Iron I use amzn.to/3D4FVAx
Hamer Crimp Tool amzn.to/2W8Xxus
Computer Safe Test Light I use amzn.to/3znp6i1 
Хобби
great work...
Thanks!
Hey good to see you back
Thanks! Good to be back!
@@doityourselfbri how have you been? By the way my friend Pete is living in Moab now and has been for A year
Any more plans for new videos in the future ?
Have you been able to spend some time there?
I have a couple things in the works, however I'm struggling to come up with ideas 💡 Have any ideas for me?
Caveat: Don't buy they standard harbor freight test light with a bulb. You may do more harm than good, especially on computerized circuits. I prefer to multi-meter where possible.
Very True 👍🏻 A high quality computer safe test light is a must in your tool kit.
Don’t solder speaker wire to speaker terminals... They break off. They are made to accept spade terminals. Use them. Those Channellock crimpers should only be used on bare terminals. You’ll damage the insulation on insulated terminals with that style crimper. Lastly, that’s a terrible way to solder-splice two wires. Ideally you want to intertwine the strands, twist to reduce the diameter of the splice, and then solder for a nice, clean, strong joint. If you are too lazy for that technique, at least twist them together before soldering. The technique in the video relies solely on the strength of soft solder to stay together. You want the joint to be reinforced with the copper strands. You also don’t want a bulge or high spot under the heat shrink. It can be prone to rubbing through the shrink tube and short out somewhere or take on moisture. Your wire twisting looked half decent though...
All very valid points! However I have had more issues with spade terminals sliding off the speaker terminals than I have ever had solder break from a speaker terminals.. Infact I have installed hundreds of speakers this way.. The bigger issue with soldering to a speaker terminals is that you can heat up the voice coil inside the speaker and damage the coil or the glue that glues the diaphragm to the coil, this process should only be done if you are quick with a soldering iron.
Hello Do It Yourself Bri!
This is Nove from AISKITS, I watched your channel it’s really exciting and impressive.
This is a newly launched LED headlight! You can see this LED headlight, is not cool？it is our latest development of a product!
In the United States, there are many classic cars, they are our closest partners! Now they may need some upgrades to accompany us better.
Replacing and upgrading our headlights does more than making driving safer. They improve the look of your vehicle as well as its performance. LED bulbs have a lower power pull on your vehicle’s battery and system. They also give our vehicle a fresh and new feel with bright white light.
I was wondering if you could do a share for it on your RUclips：
• Introduction
• Overview of features
• Actual driving footage with the bulbs
• Amazon link on the description for viewers interested in buying the product."
Please let me know if this is OK with you. Really looking forward to working with you.
Best wish,
Nove