KTM 790 890 ADV R Enduro Engineering Skid Plate Install | Back in the Garage

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024
  • In this episode of Back in the Garage I show you how to install a new skid plate on your KTM 790/890 ADV bike. I upgraded the stock skid plate to an Enduro Engineering Skid Plate. This particular video I show how to install one on a 2021 KTM 890 ADV R but the process will be nearly the same on other KTM 790 and 890 bikes as well as the Husqvarna Norden 901.
    Buying from Rockymountain ATV/MC helps support the channel! www.rockymount...
    Check out my books and other great stuff in my Amazon store! www.amazon.com...
    Want signed copies of my books? 2wheeledrider.c...
    2 Wheeled Rider T-Shirts and Swag teespring.com/s...
    Check out Epidemic Sound to up your video production www.epidemicso...
    www.2wheeledrid...
    Follow Me!
    / marioorsini
    / 2wheeledrider
    / official2wr
    Wanna send me stuff? Use the address below.
    Mario Orsini
    PO Box 64
    Bunker Hill, WV 25413
    *Some links are affiliate links

Комментарии • 18

  • @davidherringgo
    @davidherringgo Год назад

    Wanted to give you a big thank you for your brake bleed video the bleeder up by front brake lever is what I think fixed it . I did not know about that bleeder , and think that is what fixed it thank you. Full pressure now. 😊

  • @longbow0728
    @longbow0728 2 года назад

    I went with the Camel ADV and very glad I did. Peace of mind I wont wreck my motor and much more support around the rearsets.

  • @seepx
    @seepx 2 года назад

    Thank you for this-really clear. The extra weight is so low down that I doubt it matters.

  • @ianferrier235
    @ianferrier235 2 года назад

    Good job. Mario, added weight is down low that's a good thing .

  • @rayrokni
    @rayrokni 2 года назад

    great video as usual. let us know how the oil change goes

  • @sanjosejeff
    @sanjosejeff 2 года назад

    So what are your thoughts on a one piece with metal tank guards all tied in? I’ve seen guys with stress fractures on the tank plastic

  • @jerryandjamie2up
    @jerryandjamie2up 2 года назад

    NIce video Mario. Great job! Keep up the hard work and Jamie and I hope you and your family are doing well.

    • @2WR
      @2WR  2 года назад

      Thanks Jerry! Have been enjoying following along with your adventures. Tell Jamie I said hi!

  • @DevinOrr
    @DevinOrr Год назад

    I just picked up one of these. Something I didn't see or think about when ordering is the fact that the bolt heads are sticking out on the bottom. For log or rock crossings and sliding the skit plate across obstacles, how is this going to be affected? Will these just snap off? What are your thoughts and maybe I can find some flush mount bolts.

    • @2WR
      @2WR  Год назад

      Don’t overthink it. It’s a better skid plate. Go ride the hell out of it.

  • @AlsRides
    @AlsRides 2 года назад

    Nice video, definitely considering this skid plate now.
    I have a question unrelated to the video.. do you plan on doing a video on performing a valve clearance check/adjustment on the 790? I'm struggling to find a good one online and I'm sure you'd do a great job of explaining it!

    • @2WR
      @2WR  2 года назад

      When the time comes, yes.

  • @ron5184
    @ron5184 2 года назад

    Nice. Not sure why I watched this 🤔! I'm assuming same for the 2023..

  • @chrisssinstockholm
    @chrisssinstockholm 2 года назад

    Looks quite sturdy.
    However, I don't like the exposed screw heads.
    They should have used countersunk screws.
    Another nit pick is about units.
    NM = Newton Mega
    It should be Nm.
    It's a very common mistake.

    • @2WR
      @2WR  2 года назад +1

      I'm back and forth on countersunk vs exposed. Exposed are easier to get to under the bike but get the advantage of counter sunk. As for the units, you'll notice I typically keep everything in caps, mainly just to make it easier to read for folks; get your point tho.

  • @markj3517
    @markj3517 2 года назад

    Hi Mario, how are ye?
    I am a little boozed up right now,
    but I still do not understand why your RUclips channel does not have more subscribers.
    I tried to help you by getting the UK maybe the second largest RUclips guy to comment .
    Then, he shit on you🙄
    What a fucking arsehole he is.
    He comments on J the very large American comedian talk show host website,
    but it seems other folk are not allowed to do that.
    Have an excellent life if you can.
    Your KTM tips have helped me a lot 👍🏻🎉

    • @2WR
      @2WR  2 года назад +1

      Thanks Mark.

    • @markj3517
      @markj3517 2 года назад

      You are very welcome Mario,
      at least your subs are heading for 30 k
      Hopefully you will reach a breakthrough point soon 👍🏻