Love your Sink,.. That will make life easier,.. Dont forget to Make your Beautiful Wood insert to Make it a Counter top when you're Not using the Sink... Looking Great...
Keep up the videos!! I just found your channel and we are doing the same thing, however have not gotten to this point yet and I'm loving seeing your ideas. We have a 30' gooseneck we are making into a toyhauler for our motorcycles.
Good stuff, will you do a video on the fresh water tank and plumbing? I'd love to see how the water heater hooks up too. Is it just an electric water heater?
Just found your vids. Thanks for everything you guys do for us. I have an odyssey and hope to be able to get a bed in it.. took it camping last week and those seats are too hard to sleep on. Going to sub
One build out featured a removable insulated door to fit a small air conditioner unit in, It looked very practical and a good way to keep cool but also a practical way to get the unit out of the way for winter etc. The unit was mounted on the side above the wheels etc . Just wondered if you had thought of that avenue. thanks
Saw a video where the guy took wood expansion. So when its in different climates the wood can move a bit. This sounds realistic if say you are camping in a really cold climate the wood expands and then warmer climates it contracts, Any ideas on that? I like the idea of having pro doors and draws I have seen too many builds where the doors take away some of the looks.
love your bathroom layout, but im going to get a bigger shower, 48x 32 and do the walls with colored epoxy like your wife did the sink shelf. if you cut the kitchen counter, 3 shower walls, tables or whatever your can epoxy them all the same for wonderful constancy. i also did a Murphy bed with dinner table we need to have a cargo camper show, like a car show!
DJ BigDave I used galvanized screws with rubber washers. Same ones used in roofing to keep water out. Should be sealed up good. Make sure to put screws in high points of the corrugated steel. The screws slightly compress the metal keeping a constant tension on the rubber seals. Hope that helps
@@danielmid6022 I noticed alot of builds are using the corrugated metal. How is it looking after using it a while, still staying shiney after use and cleaning. Good idea to use the kit behind the metal. When the silicone needs replacement take a lot at Loctite Marine sealant or 3M 5200, your in Texas correct. 5200 needs humidity to cure. Im in the high desert of AZ and it just doesn't setup but Loctite is the trick over hear. Nice build, just got my 7x18 and going to start layout. Thanks for the videos.
Only used a handful of times at this point but so far so good. I have friends with the same set up for over 2 years now with no problems. Hope that helps
There is a link to it on the 5th update video. Still have it, and bought another for our outdoor shower. I have used 2 other brands before and this one has outlasted both. ruclips.net/video/-qooMFSq4w4/видео.html
Smart buying doors and drawers boxes are easy fronts are tough. Did the cabinet maker put the hidges on the doors or did you guys?
Love your Sink,.. That will make life easier,.. Dont forget to Make your Beautiful Wood insert to Make it a Counter top when you're Not using the Sink... Looking Great...
Nice build -- too much painting for this old dog. 2 coats at most and Im done 👍
Cheers
Thanks! I hate painting too 😃
Keep up the videos!! I just found your channel and we are doing the same thing, however have not gotten to this point yet and I'm loving seeing your ideas. We have a 30' gooseneck we are making into a toyhauler for our motorcycles.
Love the Tank Top top Clear Articulation on your Video,.. Keep up the Good Work.
Good stuff, will you do a video on the fresh water tank and plumbing? I'd love to see how the water heater hooks up too. Is it just an electric water heater?
Daniel Lindstrom thx! I'm hoping to if I can get enough video footage along the way. It's a propane water heater.
Just found your vids. Thanks for everything you guys do for us. I have an odyssey and hope to be able to get a bed in it.. took it camping last week and those seats are too hard to sleep on. Going to sub
How is it going with the water mixing at the heater i like the idea... just wondering if it works well?
It works good, just have to get it dialed in based on the weather each trip. If u are super picky, a traditional mixer would be better of course.
Great job. Have you come up with a clever transition for the radius corners at the ceiling. Thank you.
What size is your trailer
Nice!!!
One build out featured a removable insulated door to fit a small air conditioner unit in, It looked very practical and a good way to keep cool but also a practical way to get the unit out of the way for winter etc. The unit was mounted on the side above the wheels etc . Just wondered if you had thought of that avenue. thanks
Saw a video where the guy took wood expansion. So when its in different climates the wood can move a bit. This sounds realistic if say you are camping in a really cold climate the wood expands and then warmer climates it contracts, Any ideas on that? I like the idea of having pro doors and draws I have seen too many builds where the doors take away some of the looks.
love your bathroom layout, but im going to get a bigger shower, 48x 32 and do the walls with colored epoxy like your wife did the sink shelf. if you cut the kitchen counter, 3 shower walls, tables or whatever your can epoxy them all the same for wonderful constancy. i also did a Murphy bed with dinner table we need to have a cargo camper show, like a car show!
Do a walk through Dude for us. Maybe on our designs we can use some of ur ideas.
Daniel- I want the same shower set up, did you use silicone around the screws ? I am sure water can leak behind, What did you use, ? thanks,
DJ BigDave I used galvanized screws with rubber washers. Same ones used in roofing to keep water out. Should be sealed up good. Make sure to put screws in high points of the corrugated steel. The screws slightly compress the metal keeping a constant tension on the rubber seals. Hope that helps
@@danielmid6022 I noticed alot of builds are using the corrugated metal. How is it looking after using it a while, still staying shiney after use and cleaning. Good idea to use the kit behind the metal. When the silicone needs replacement take a lot at Loctite Marine sealant or 3M 5200, your in Texas correct. 5200 needs humidity to cure. Im in the high desert of AZ and it just doesn't setup but Loctite is the trick over hear. Nice build, just got my 7x18 and going to start layout. Thanks for the videos.
Great Videos! I was just wondering what type of material did you use on the outside of the shower frame?
How are planning to cover all you widening in the upper corner of the ceiling?
I used a metal trim. I think it can be seen in other videos I have posted
Good progress, I will be having barn doors in the back. cabinets turned out very nice, did you use 3/4 inch plywood or?
Banjo Benson thx! I kind of wish I would've gone with barn doors as well. The cabinets are 90% 1/2". Only used 3/4 to support the sink
Did u say you put the corrugated metal over the plastic shower walls? What did you use on the trailer walls?....almost looks like sheet rock....?
Yes I put it over the plastic shower walls. The trailer walls are plywood with a vinyl coating, it came with those walls
Hi great job I live in Texas was wondering how much would you charge me to help me out with my trailer thanks
Thanks! Feel free to email me anytime I'll do what I can to help u out with any questions or whatever I can do
how has the shower been holding up? im trying to decide on water heater in mine. think we are going to do the same heater and tin setup like yall.
Only used a handful of times at this point but so far so good. I have friends with the same set up for over 2 years now with no problems. Hope that helps
what brand of water heater did you use? and do you still like it?
There is a link to it on the 5th update video. Still have it, and bought another for our outdoor shower. I have used 2 other brands before and this one has outlasted both. ruclips.net/video/-qooMFSq4w4/видео.html
Daddy
What size is your trailer
19X7