Just and FYI. Following the steps taken in this vid worked great. You don’t have to disconnect the harness if you are not replacing it. Upon inspecting mine, there was no deterioration so I didn’t replace it. Used a dremel to cut the clips and cleared the codes. Worked like a charm. Thanks for sharing this vid!
Awesome video love when you find this kind of gem my lights were pinging warnings and I was afraid to drive in the dark this video and about 10 minutes later lights are fixed kudos to you and Cayenne Whisperer
You guus are doing a great job with a cay2nne. I do have a cayenne 08 . Driver side is completely dead. All wires are like in the video. I order the harnesses for both sid3s. My questio. Is. How do you take out the is going to the car. All black. Didn't show in the video or how to put it back.
Great modification on the fitting but the most difficult part is removing the Pig Tail as it slides sideways and catches on the airbox - how did you get that out - can you show that please as here is where the difficulty lies in replacing the Pig Tails 🤔
Nice fix, but be aware: the failing wire insulation also occurs inside the headlight unit as I just found out. Cause is an experimental use of environmental friendlier insulation material. Right,thanks hella/Porsche..Very concerning
Just and FYI. Following the steps taken in this vid worked great. You don’t have to disconnect the harness if you are not replacing it. Upon inspecting mine, there was no deterioration so I didn’t replace it. Used a dremel to cut the clips and cleared the codes. Worked like a charm. Thanks for sharing this vid!
Glad it worked out. You’re welcome!
I'm curious what year is your Cayenne? I checked mine and they are in great shape too! 06 cayenne S
@@89emeza It can also be the climate that degrades the coatings on the wires. Humidity and salt will eat through a polyurethane coating.
@geoffalan9336 I'm in alberta. Not much humidity but lots of salt.
But perhaps it doesn't make it to the harness to cause damage
@@89emeza I’m in Toronto. My harnesses were totally fine as well. Maybe it’s just the American air? :-)
Wish I would have seen this video before I had to figure out all of this stuff myself! Lol.. Great video.
Awesome video love when you find this kind of gem my lights were pinging warnings and I was afraid to drive in the dark this video and about 10 minutes later lights are fixed kudos to you and Cayenne Whisperer
Glad we could help
Could you please provide a link to the replacement wiring harness used? Thanks! Keep up the great work!
Yes, we will work on linking that in the description
You guus are doing a great job with a cay2nne. I do have a cayenne 08 . Driver side is completely dead. All wires are like in the video. I order the harnesses for both sid3s. My questio. Is. How do you take out the is going to the car. All black. Didn't show in the video or how to put it back.
I put dielectric grease on mine...Thanks for sharing...Grease the rails too...
Great modification on the fitting but the most difficult part is removing the Pig Tail as it slides sideways and catches on the airbox - how did you get that out - can you show that please as here is where the difficulty lies in replacing the Pig Tails 🤔
I can look and see what footage we have of it. Send us a dm on Instagram with more detail
Great video. Are you still working on the link to the pigtail? Thank you.
Its in the video description
Does the connector stay in the back of the headlight on it's own?
Nice fix, but be aware: the failing wire insulation also occurs inside the headlight unit as I just found out. Cause is an experimental use of environmental friendlier insulation material. Right,thanks hella/Porsche..Very concerning
good jobs
Where did Aaron go?
Playing Tetris or something.
Ohhh Boys, don't Talk to much! 🥱 Show how to fix quickly! That would be wunderfull 🎉