The way you explain everything, the way you do! Even an Old Analog Goat like me can understand. Watching and listening to you has boosted my confidence in making changes to my Helicopter's. It's really, really tough for me to find a builder so like everything else, I am pretty much self taught. Thank you Sir!
@@33forsaken how you doing, weve spoken a few times over last few years and again ive always recommended your tutorials to everyone on the facebook Align page. i commented to you a couple weeks ago about doing a tutorial on the fc6250hx fbl control unit. iam currently trying this on a trex550E older flybar converted to fbl , i seem to be having all sorts of issues! are planning on doing a blog on this unit ?
Nice to see you again young fella,remember your fascinating videos years back. Another amazing video and thank you for all your (5 star) show. Than you.
Freddy so brilliant....I will use your technique in the next few weeks when I get to it, on my XL550 ..I am building... But I also have a Align 600 XL which has been terrible to fly...So I am going to start again with your videos and reset it as you describe.. Very much appreciated
Freddy you did a fantastic demonstration on how to setup the AR7200BX . I have to ask though if you have you choice or preference which would you prefer the AR7200BX or the BeastX MicroBeast Plus I just don't know which one to place on my Bird ..Help .. Thanks again for all your help ..
Hi Freddie. I watched all 4 videos in your series a few nights ago, most informative, thank you. I'm really struggling with my set up. I'm new to RC, I bought a second hand 'as new' Trex450 and I have a DX6 with 4651T receiver. I've fitted a TGZ380 BeastX clone but cannot get it all to bind. Do I need an adapter lead between the RX and the TGZ380? Cheers.
I just purchased a 450 size heli and Im trying to decide on what receiver to go with. I have 2 in mind AR722BX and SPMFC6250HX . Which one do you recomend???
hello sir thank you for the setup procedure very helpful! can u tell me with my 450 size heli do you think it would be better to supply power to the beastx and to my spektrum reciever? i know they say anything over a 450 size you should supply power to both. can you give me your take on that? THX
So are you using the beast x plus or something different then the AR7200? If so then yes double redundancy is always nice for receivers. However with the AR7200 in particular it does not need a receiver so you can run a double redundancy cable to just the FBL.
Hi Freddie.. i only have little movement on the swash now i setup the alierons 6 degree is that right.neg 6.6 and pos 6.8 blades front to back.. will that be ok.. then 12.5 and -12.5 pitch.. all in all limited swash now with all this setup..is that right...
HELLO FREDDY!!, I HAVE A RAPTOR 50 SE AND I HAVE A 3 BLADE HEAD TO INSTAL AS355 FUSELAGE AND I CANT COFIGURE THE 1 SERVO SETUP ON MY DX9 BLACK EDITION I CANT GET THE SERVOS TO MIX PROPERLY, I WAS TOLD TO SET THE GYRO TO MECHANICAL,I NEED HELP IF YOU CAN. THANKS FREDDY WHEN YOU HAVE TIME..
Sill question but are you using the AR7200bx for this setup? Shoot me a PM on Facebook maybe I can help out :) I have built a Bergens intrepid before and I believe I had the same setup.
Hi Freddy i got a beast x plus tied in spektrum radio but the beast will not reconize the rx (any ideas ) help !!!! wiring seems to be correct and i can start motor
I believe they are still for purchase US. It may be a new model by now or even the align integration or the spektrum one. Also heli freak and other FB sells groups have them for sure.
@@33forsaken thanks will do if any problems come along i dod get the helicopter flying yesterday very hard compared to my 6g helis and drones but manageable will need to learn more did have problems with the flaps switch were i did not know why my tail servo wouldn't respond to commands after existing setup but figured out I hadn't set my gyro percentage on the transmitter
hi when the beast x is setup up and finished, should my aileron pitch be 6 degree at top and bottom stick so it only banks over 6 degree maximum...is that correct ..
No the AR7200BX is the receiver and you just plug in the SAT. It connects right in the center of where all the servo pins are. You will see the insert for the Spektrum SAT.
Hey Freddie... Have another question. While powered up and I flip the "D" switch on my DX6E the lights on the RX dance around. Any idea what that is??? Or what I'm changing??
@@33forsaken so what is the SAT? If this is the rx and fbl? Im new to this not done a build yet and learning on a blade 230s v2 with the help of your videos. Cheers!
I do not believe this to be needed for this FBL system. Some other ones like the 3gx and older had you push the button then power on to enter programming modes.
Привет друг.Нужна твоя помощь в настройке вертолета BIADE500X, медленно возвращаются сервоприводы в центральное положение,AR7200BX SPEKTRUM DX6I,как настроить быстродействие сервоприводов?Помоги пожалуйста я новичок но очень хочу научиться управлять вертолетом.Помогите
Hi Freddy. I was reading manual on attitude control (microbeast plus pro edition) and it stated that attitude control must be swiched off during take off and landing. Why not with it? You take off and land in horizontal position and I do not apply any inputs during take off (maybe just a little right aile after it is an inch or two in the air to compensate for drift to the left). I think what they ment is if the heli is on the ground, then you should not make any inputs from the right stick. What is your opinion?
You nearly always have more useful correct facts that other people don't include or know. You really know your helis.
The way you explain everything, the way you do! Even an Old Analog Goat like me can understand. Watching and listening to you has boosted my confidence in making changes to my Helicopter's. It's really, really tough for me to find a builder so like everything else, I am pretty much self taught. Thank you Sir!
Wow thank you so much that is amazing to her and I am very thankful that I could help :)
@@33forsaken how you doing, weve spoken a few times over last few years and again ive always recommended your tutorials to everyone on the facebook Align page. i commented to you a couple weeks ago about doing a tutorial on the fc6250hx fbl control unit. iam currently trying this on a trex550E older flybar converted to fbl , i seem to be having all sorts of issues! are planning on doing a blog on this unit ?
I think you have the best video explaining everything about this flybarless on YT
By far one of the most informative videos around-clear and concise. Your videos have help me in this hobby and my current build. Keep it up brother!
Hey thanks so much buddy :)
Nice to see you again young fella,remember your fascinating videos years back. Another amazing video and thank you for all your (5 star) show. Than you.
I am happy to help thanks for checking out my vids :)
Hey, Freddy. Where have you been? Your videos always make more sense than most others, missing you. Please come back.
Bro it's been a minute since I've set up a heli. Thanks for the video, great info 🤙😜🪂
Dude, thank you for this. This clarified so much for me and has made a huge difference for me in setting up my first fbl heli.
Thats amazing buddy I am so happy to hear. Feel free to reach out to me directly any time via FB messenger if you need any help.
Freddy so brilliant....I will use your technique in the next few weeks when I get to it, on my XL550 ..I am building... But I also have a Align 600 XL which has been terrible to fly...So I am going to start again with your videos and reset it as you describe.. Very much appreciated
Good luck brother, I am working to get the rest of the videos out ASAP.
Very good video Freddy, I will definitely be using your technique on my build.
Thank you :)
Gawd...this is awesome...thank you sir
@@sirlancair hey thanks so much o hope you the best :) please share and subscribe
Great video! I think this will help me a lot when I do my first Beast-X setup :)
Freddy you did a fantastic demonstration on how to setup the AR7200BX . I have to ask though if you have you choice or preference which would you prefer the AR7200BX or the BeastX MicroBeast Plus I just don't know which one to place on my Bird ..Help .. Thanks again for all your help ..
Fantastic thanks, my first beast x setup it helped me loads !!!! big thanks. 👍
If you ever need any more help feel free to reach out to me :) fly safe out there
Your explanations are spot on .
Hi Freddie. I watched all 4 videos in your series a few nights ago, most informative, thank you. I'm really struggling with my set up. I'm new to RC, I bought a second hand 'as new' Trex450 and I have a DX6 with 4651T receiver. I've fitted a TGZ380 BeastX clone but cannot get it all to bind. Do I need an adapter lead between the RX and the TGZ380? Cheers.
Very well done Freddy
Thanks for doing this video. You are awesome.
Hey no worries thank you for watching it :)
Any video on the align mini grs?
I just purchased a 450 size heli and Im trying to decide on what receiver to go with. I have 2 in mind AR722BX and SPMFC6250HX . Which one do you recomend???
Hi how to put a receiver to the ar7200bx I whant to use a flysky transmitter but how do u setup the receiver to the beastx
Freddy what u charge to setup a goblin 570 and a Ix20 radio.
hello sir thank you for the setup procedure very helpful! can u tell me with my 450 size heli do you think it would be better to supply power to the beastx and to my spektrum reciever? i know they say anything over a 450 size you should supply power to both. can you give me your take on that? THX
So are you using the beast x plus or something different then the AR7200? If so then yes double redundancy is always nice for receivers. However with the AR7200 in particular it does not need a receiver so you can run a double redundancy cable to just the FBL.
@@33forsaken yes im using the microbeast plus.
What's up bro have some questions and would love your opinion, it is not on this video its about some of my my helis
Feel free to shoot me an IM on FB messenger buddy
@@33forsaken what's your I'm name ?
Hi Freddie.. i only have little movement on the swash now i setup the alierons 6 degree is that right.neg 6.6 and pos 6.8 blades front to back.. will that be ok.. then 12.5 and -12.5 pitch.. all in all limited swash now with all this setup..is that right...
HELLO FREDDY!!, I HAVE A RAPTOR 50 SE AND I HAVE A 3 BLADE HEAD TO INSTAL AS355 FUSELAGE AND I CANT COFIGURE
THE 1 SERVO SETUP ON MY DX9 BLACK EDITION I CANT GET THE SERVOS TO MIX PROPERLY, I WAS TOLD TO SET THE GYRO TO MECHANICAL,I NEED HELP IF YOU CAN. THANKS FREDDY WHEN YOU HAVE TIME..
Sill question but are you using the AR7200bx for this setup? Shoot me a PM on Facebook maybe I can help out :) I have built a Bergens intrepid before and I believe I had the same setup.
Hi Freddy i got a beast x plus tied in spektrum radio but the beast will not reconize the rx (any ideas ) help !!!! wiring seems to be correct and i can start motor
Freddy any of these for sale where you are.non in uk
I believe they are still for purchase US. It may be a new model by now or even the align integration or the spektrum one. Also heli freak and other FB sells groups have them for sure.
is the ar6250bx different? betther or worse?
very helpful thank you
Glad it was helpful!
Ok my Swashplate throws are very minimal now what did I do wrong?
I just bough a trex450 with this controller I got a dx7s so before it gets here I'm trying to get setup
Sounds good, feel free to ask if you have any questions buddy :)
@@33forsaken thanks will do if any problems come along i dod get the helicopter flying yesterday very hard compared to my 6g helis and drones but manageable will need to learn more did have problems with the flaps switch were i did not know why my tail servo wouldn't respond to commands after existing setup but figured out I hadn't set my gyro percentage on the transmitter
hi when the beast x is setup up and finished, should my aileron pitch be 6 degree at top and bottom stick so it only banks over 6 degree maximum...is that correct ..
Do I need to use a separate RX with the ar7200 if I'm using a DX6E?? If not where do I plug the sat into the ar7200 at???
No the AR7200BX is the receiver and you just plug in the SAT. It connects right in the center of where all the servo pins are. You will see the insert for the Spektrum SAT.
Hey Freddie... Have another question. While powered up and I flip the "D" switch on my DX6E the lights on the RX dance around. Any idea what that is??? Or what I'm changing??
@@33forsaken so what is the SAT? If this is the rx and fbl? Im new to this not done a build yet and learning on a blade 230s v2 with the help of your videos. Cheers!
What does pressing the setup button and turn the model on do
I do not believe this to be needed for this FBL system. Some other ones like the 3gx and older had you push the button then power on to enter programming modes.
Freddy Hi you doing , could you please send me link to download the manual for this RX? THX in advance
Are you asking for the manual for the Spectrum radio or the AR7200?
@@33forsaken hi freddy I am asking for the AR7²00BX receiver. please if you have the manual link,I will appreciate if you copy me to download . Thx
Привет друг.Нужна твоя помощь в настройке вертолета BIADE500X, медленно возвращаются сервоприводы в центральное положение,AR7200BX SPEKTRUM DX6I,как настроить быстродействие сервоприводов?Помоги пожалуйста я новичок но очень хочу научиться управлять вертолетом.Помогите
wow can you repeat the same thing over and over and over... yeah we get it go tto the next step
Wish I could listen to him keeps snacking his lips driving me crazy
Is what it is my good buddy lol we all have our imperfections
No no your video is great I just turn the volume down Its me certain sounds drive me crazy
Hi Freddy. I was reading manual on attitude control (microbeast plus pro edition) and it stated that attitude control must be swiched off during take off and landing. Why not with it? You take off and land in horizontal position and I do not apply any inputs during take off (maybe just a little right aile after it is an inch or two in the air to compensate for drift to the left). I think what they ment is if the heli is on the ground, then you should not make any inputs from the right stick. What is your opinion?
I have never had any issues, honestly if you follow the videos correctly and everything is sound you should have zero issues buddy
@@33forsaken Freddy. I think the best way to answer my question is to give it a shot at the field with attitude control on).