My turbo 350z wont stop over boosting!!!

Поделиться
HTML-код
  • Опубликовано: 6 ноя 2024

Комментарии • 14

  • @able_trucking780
    @able_trucking780 4 года назад

    Get a brand name waste gate and check vacuum lines also get car professionally tuned.

  • @joeymucha09
    @joeymucha09 5 лет назад +2

    Hope you figure it out soon Have you tried different wastegates?

    • @brokencarzgarage945
      @brokencarzgarage945  5 лет назад

      yes this is the second one it might just be the design of the manifold

  • @boostedprojectz
    @boostedprojectz 5 лет назад

    Try disconnecting your boost controller and just run a straight vacuum line from a boost source to bottom port of wastegate. That will show if your wastegate isnt working right. It should open once it hits spring pressure. It seems like its a boost control issue. Boost control could be not working properly or its not connected properly.

    • @brokencarzgarage945
      @brokencarzgarage945  5 лет назад

      Sadly I did that already I am about to follow all the lines from wastegate to turbo and controller and replace them I have a feeling there might be a tear or something

    • @boostedprojectz
      @boostedprojectz 5 лет назад +1

      @@brokencarzgarage945 did it overboost when the wastegate was connected straight to the turbo?

  • @Nismonomania
    @Nismonomania 5 лет назад +1

    Triple check your vacuum routing for the wastegate and boost control. Even with a poor design and small wastegate it shouldn't overboost THAT easily. Also if you have enough space do a 90 straight off the manifold with a 44mm although it looks like it would be close.

    • @brokencarzgarage945
      @brokencarzgarage945  5 лет назад

      Yeah it's a bummer space is so limited :/ I disconnected boost controller still not much luck I do have a feeling of what it might be I'll have to check out today hope it works!

  • @Nismonomania
    @Nismonomania 5 лет назад

    Did you ever figure this out?

  • @jairsamuel6497
    @jairsamuel6497 5 лет назад

    What bov are you running and how did you get your spool to be loud?

  • @yuno2468
    @yuno2468 5 лет назад

    When you putting the bumper back on

  • @lowm3
    @lowm3 4 года назад

    Whats ur ig