【🎧】 Keychron K6 modding｜PCB foam DIY｜keyboard build ASMR｜
HTML-код
- Опубликовано: 5 сен 2024
- ==My GEAR==
《Audio》
SHURE MV7 ：amzn.to/3vTgh2o
Audio ID4 interface：amzn.to/3ubKxoI
Sennheiser ambeo smart headset：amzn.to/3SxLpgP
《in-ear monitors》
JVC FW01：amzn.to/3u7rvQp
DUNU Zen pro：amzn.to/42hN90X
《Image》
SONY A7R III
amzn.to/3SBcbUv
Tamron 28-75 F/2.8 Di III VXD G2
amzn.to/3vQEPch
Cam link 4k
amzn.to/3vORSuR
《soldering》
ts100：amzn.to/4bdBkga
別說不喜歡段落軸為何要買茶軸版，因為當初紅軸缺貨... :(
這次算厚潤了，剛潤完手感差很多，是我喜歡的那種帶點悶的手感
有些人不喜歡空腔音，但適度的空腔音我也是挺愛
唯一遺憾的是運氣不好，這組衛星軸不太給力
剪腳、上油、甚至精調鐵絲都無法改善那惱人的鐵絲聲
過陣子應該會換掉它。
【潤滑油】
krytox 105
krytox 205 g0
This was a very well-made video. It deserves to have more views, great job! Additionally, I really like how you made that custom PCB to plate gasket, well done!
Thanks for comment and very appreciate you like my works. Peace! 💛
I never thought browns could sound so nice! Good Video:)
Thanks friend.🤟🏻
now thats one professional looking foam there. no joke real cool.
Yeah I think so. But I have changed to 3.5mm Poron now. 😅
@grana official Poron
At around the 7:50 mark, it sounds like Money from Pink Floydd ;) Nive video!
One thing is for sure, you must be a Pink Floyd fan!😂
Thank you for such a great reply!🤟🏻
typing test was sus, but good video, I love your shape puncher
haha you do have short fingers! thanks for the PCB foam DIY tutorial great help :)
Glad to be helpful to you.✌🏻
Nice and relaxing video! I'd recommend to change the keycaps as well, the stock ones sound really hollow
Thank you for your suggestion, it has been replaced. :)
great job! they sound rly good after the mod
Thanks you💛
Nice lube station!
Nice video but i have to say that the noise reduction comes a lot from lubing and not so much from then dambening foam.
You are right, the foam is not thick enough, it has been replaced with 3.5mm Poron.
nice bro
How much mm is the foam what u use ? I need a foam too but idk which mm 1,2,3,4,5,6,7,8,9,10mm ? Foam
3.5mm is standard for plate foam.
Bottom foam generally uses 1~2mm.
This video is awesome.
Would you recommend the k6?
Thanks !
If you use MacOS,K6 is great!
do you have to remove the switches to seperate the pcb from the plate??
Yes, the switch must be removed.
is there anywhere u can buy them premade? was lookinf for some like this in rubber and foam!
Sorry,I don't know where can buy the premade. Maybe some webshop have?
Is this possible with the not hot swappable version? I don't want to desolder my switches
You can do simple lubrication and install the bottom foam.But the PCB foam can not be installed without desoldering.
do you have the hotswappable version of K6?
Yeah, this k6 is hotswappable version.
想問一下2:30 是用什麼材質做的，還有3:22是什麼機器呢，不好意思問題有點多XD
那塊是一面Eva泡棉貼了一面不織布，我是在書局無意先發現的，不過鍵盤現在已經換成Poron材質的消音棉了。
@@shortfinger511 感謝回覆，聽說羊毛氈和記憶棉也不錯
How thick is that foam you used inbetween the plate and pcb?
The foam in the film is obtained randomly, in fact the thickness does not match.
3.5mm is the standard positioning plate thickness, and this thickness is recommended.
@@shortfinger511 woah thanks for the response. Im unable to find 3.5mm foam. What do you think fit better 3mm or 4mm? Im gonna do my own foam aswell...
@@wlanamaicp 3mm for hot swap keyboard ,4mm for soldering.
You can search with the keyword "plate form". They will be standard 3.5mm.
what type of foam did you use and thickness?
One side Non-Woven and one side EVA.I just want to try it out and it doesn't look bad.But it is not thick enough, so I replaced the 3.5mm Poron foam now.
無論海內外，真的是缺貨缺很大，我前後等了半年才有想要的型號
居然會缺貨！有點意外了..(驚)
3:22 what's this machine called?
it called stamping machine.
Sound better after modding, but somehow still sound a bit sketchy. Is it because of the Keycaps?
yes keycaps are real bad (rubber like ABS), I used PBT keycaps on my K4 V2 and it sounded much better (without any other mods)