I know I’m a bit late to comment but I found your channel 2 days ago and I’m just addicted to watching you build up the patrol and this trailer I’m 13 and this is really helping me think of Ideas for cars and trailers🥳😍🥰🥰🥰🥰 and learning welding and metal work tips
Another great video! As for the water system I’d add a electric pump with a tap at the rear. You could add a garden fitting to the inlet of the pump at the front so all you have to do is plug in a hose and put it in the mouth of the jerry can
In north amarica, many people use a length of 4" pvc pipe sealed at both ends, with fittings for air in and water in/out. Fill with water and pressurize to 5-10 psi. Or bar equivalent. Mount it under trailer up out of the way with only the fittings end exposed for recharging of water. Add water lines to where you need/want them.
I got a tiny submersible 12v pump that I could've put into a jerry can neck. Then I had plan to 3d print a new lid to hold the small diameter water hose and the wiring out, directing them as needed. Then I went in a different direction.
There are a few USB chargable water solutions for a tap or even a shower. you could look into some of those, or 3d print a cap with a hole so you can drop a suction pipe into the can and have the tap at the back.
For my (budget) water system in a similar style of jerry can holder, I used a hand-pump tap from a caravan, connected up using food safe hose and brass fittings to a female coupler screwed and silicone'd into the cap of the jerry can with hose running down to its bottom. It makes for mess free filling using a hose too and I made a stopper for the coupler using a tap connector filled with silicone.
Nicely done. As for the water system, what about running a hose in through the cap(maybe buy spare caps to do it?) And just a small electric pump. Could even run a pipe back so you could get water at the back without moving the cans
Trailers looks sick. As for the water tank I run a submerged 12lpm seaflo pump with a brass 15mm tank outlet and lockable tap about 3/4 of the way up the side of the Jerry absolutely perfect and all done on the cheap
Make a custom lid that goes on the jerry can that has a line and a tape on it and have a hose quick connector and then just put the jerry can upside down when u want water.👌
Man that’s look good! For water, could be worth exploring using a 12v automatic water pump - leave jerry cans where they are and pipe it to the back. Recently did this - works a treat
Customize the Jerry can holder on the side where the bung is, chop the T bracing on the bung side and add a hinge with lock. Then you can open and slide the can in with tap installed.
maybe just use hoses and custom extend each tank feed from the lid . then run hose down to the rear with inline pump coz gas bottle at rear . yeah good work looks good !
Great work mate loving the episodes! Maybe for your water set up see if you can get a submersible 12 volt pump to go into the Jerry can? And plug in at the end f the camper and then you could swap over easily when empty 😁 just a thought Keep the videos coming brother
Stoked to find your channel - I’ve been thinking about this concept for a while and came across your video by chance so I’ll be watching your whole series, great work 👍
Hey mate lovin the build videos. Just wondering with the spare tire, was there enough room to mount it laying down? can't believe I've only just found your channel.
Been loving the trailer build series mate, such an epic job! I think the olive jerry cans actually set it off nice instead of all black too. Look forward to watching a few trips away in it and see how it evolves! Keep up the good work!
Hey bro loving the content… look up portable 12v jerry cans on RUclips you can rig up a little pump and have it attached to a hose to pump out water super simple or you can make it even easier and buy a “12v shower pump” that will go Inside a jerry can and you can just switch them between Jerry’s
Minticle bro! Love ya work. Gusseting the spare wheel carrier with substantial gussets along the line of the draw bar will assist. Possibility of the timy gussrts cracking when the big dawg is offtoad articulating. Other thing is gusset the A - frame with flat plates covering your joins in the dingle drawer tube to the hitch. Very interested to know the weight when fully loaded for a trip. Weight creeps up way quick. Cheers bro
Been watching or a while some great ideas used for your build be nice to know what the total weight will be as a ready to go with water food etc what are your tyre pressures at the moment as with my continuing M416 trailer build had to drop my pressures down to 25 psi to get an even wear across the tread from my trucks 36 psi which is what I originally run keep the good work and videos going and waiting to see your truck and trailer used in anger out on the tracks
Looking mint bud. Whats the plan with tow hitch? Not sure if I missed that plan? With the water jerrys you could possibly link 2 with a hose, stick a 12v pump and feed hose to the back the trailer and keep 1 jerry easy to pull out for grey water or water for diesel if he comes out with you guys?
Key is in the prep and paint covers all sins. YEAH WOW! 👍How's the floor holding up with all this punishment? Found you channel looking for garage flooring ideas.
@@RoamLyfe i wish i lived near you to buy it when you build the 2.0 version of it. You know you are because you enjoyed the build so much. Lol. Keep pumpin’ out the videos man.
Personally I think the spare will bounce up and down and break it over time (front to back). I would have gone with two bits of tube for the wheel to sit on with a ratchet strap over the top. But it will last years as is anyway.
How about adding a mount for a fire extinguisher that will be readily accessible. Just added one to my camper trailer. Better to have it and not need it....
Dude I think you spent to much on those fancy tyres, I mean you're just dragging it along behind you ,obviously if you're going off road you want a nice thick tread I surppose but I would just use regular off road tyres, nothing fancy ,hey but it's your money,
I know I’m a bit late to comment but I found your channel 2 days ago and I’m just addicted to watching you build up the patrol and this trailer I’m 13 and this is really helping me think of Ideas for cars and trailers🥳😍🥰🥰🥰🥰 and learning welding and metal work tips
Another great video! As for the water system I’d add a electric pump with a tap at the rear. You could add a garden fitting to the inlet of the pump at the front so all you have to do is plug in a hose and put it in the mouth of the jerry can
That’s a great idea!! Thanks mate!
In north amarica, many people use a length of 4" pvc pipe sealed at both ends, with fittings for air in and water in/out. Fill with water and pressurize to 5-10 psi. Or bar equivalent. Mount it under trailer up out of the way with only the fittings end exposed for recharging of water. Add water lines to where you need/want them.
That’s actually a pretty good idea!! Thank you!!
I got a tiny submersible 12v pump that I could've put into a jerry can neck. Then I had plan to 3d print a new lid to hold the small diameter water hose and the wiring out, directing them as needed.
Then I went in a different direction.
That’s a good idea!! Thank you!
@@RoamLyfe I've got plenty of good ideas. Mostly, though, you'll just end up drunk.
Run a hose and 12v pump to the rear and use one of your switches back there. it feels bloody good to filck a switch at camp and get ya water
this i8s looking mint bro cant wait to sere it out and about thanks' for the vid
Thanks mate!!
Great video. I am really likeing this project. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Wow can’t what till it done love the vids mate keep it up
So keen for it to be finished!
I can’t what for what’s next
@@RoamLyfe love you vids
There are a few USB chargable water solutions for a tap or even a shower. you could look into some of those, or 3d print a cap with a hole so you can drop a suction pipe into the can and have the tap at the back.
Oh really I’ll have a look! A rechargeable one would be awesome! Cheers!!
For the water system link all the tubs and run a small 12v pump with a push button switch at the rear and run a line to the rear for the kitchen 👌🏼
That’s kinda the plan at the moment!! Just a small like 8-10LPM pump and she should be sweet!
For my (budget) water system in a similar style of jerry can holder, I used a hand-pump tap from a caravan, connected up using food safe hose and brass fittings to a female coupler screwed and silicone'd into the cap of the jerry can with hose running down to its bottom. It makes for mess free filling using a hose too and I made a stopper for the coupler using a tap connector filled with silicone.
That’s great thanks heaps!!
Nicely done. As for the water system, what about running a hose in through the cap(maybe buy spare caps to do it?) And just a small electric pump. Could even run a pipe back so you could get water at the back without moving the cans
You should have a under tray water tank may be 30 to 50 liters with a 12volt pump great for the kitchen sink the trailer looks awesome
Trailers looks sick. As for the water tank I run a submerged 12lpm seaflo pump with a brass 15mm tank outlet and lockable tap about 3/4 of the way up the side of the Jerry absolutely perfect and all done on the cheap
That’s a great idea thank you mate!!
Make a custom lid that goes on the jerry can that has a line and a tape on it and have a hose quick connector and then just put the jerry can upside down when u want water.👌
Thanks legend!!
Get one of the mini pumps that just screw into the top of the Jerry, heaps of vanlife people use them
Make that's one sick looking trailer - top stuff man!
Thanks mate!!
Finally the camper trailer is done. So keen to see it behind coal out on the tracks
Almost done haha!! She’s bloody close mate!
Man that’s look good! For water, could be worth exploring using a 12v automatic water pump - leave jerry cans where they are and pipe it to the back. Recently did this - works a treat
That’s kinda what I’m thinking, tee all three underneath and then have running water at the rear of the trailer!
solid idea
@@RoamLyfe So much easier than moving full water cans around too! Can’t wait to see what you do
Customize the Jerry can holder on the side where the bung is, chop the T bracing on the bung side and add a hinge with lock. Then you can open and slide the can in with tap installed.
Thanks legend!!
Trailer looks so good, keen to see it being tested
So keen!!
New camera and lights looking mint mate 👌🏽 can’t wait to see the trailer on the tracks and tested 🔥🔥
Thanks mate! Glad you can see the quality upgrade!!
Kickass do a rechargeable submersible shower that fits into a Jerry can could mod that to work
maybe just use hoses and custom extend each tank feed from the lid . then run hose down to the rear with inline
pump coz gas bottle at rear . yeah good work looks good !
Thanks mate!! I’m thinking about going into bottom of the cans to the rear!
Great work mate loving the episodes! Maybe for your water set up see if you can get a submersible 12 volt pump to go into the Jerry can? And plug in at the end f the camper and then you could swap over easily when empty 😁 just a thought
Keep the videos coming brother
I’ll look into something similar to that I think mate!! Thanks for the comment!!
Smashing it mate! 👌🏽
Looks good mate, I’ve got a no.5 with 2 x 40lt tanks under the tub above the axle. Helps keep the CoG lower and plenty of water
That’s a great idea, did you go one on either side of the tube?
Stoked to find your channel - I’ve been thinking about this concept for a while and came across your video by chance so I’ll be watching your whole series, great work 👍
Yeww!! Welcome mate! Hope you enjoy!!
Bloody beautiful !!
Thanks Brady!
Damn that camera quality! Just need a massive Roam Lyfe sticker on the trailer now, looks great 👌🏼
Glad you can see the added quality!!
Looks mint bro! Just needs a big ol roam lyfe sticker. Great job 👌
Definitely gonna have to lay a roam Lyfe sticker somewhere haha!
Great work man! You've great skills, pleasure watching this progress👍🏻
Thank you!!
can't wait to get my t-shirt they look sick and the trailer looks good as
Thanks for pre ordering mate!!
Hey mate lovin the build videos. Just wondering with the spare tire, was there enough room to mount it laying down? can't believe I've only just found your channel.
Looks absolutely smick..... Love it.....!!!!!
Thanks Malcolm!!
Trailer looks spotty dog !!!
Hahah!!
Love it bro love how your doing everything yourself it’s mad 🤙🏼
Looks killer love watching this build
Thanks Marty!!
Been loving the trailer build series mate, such an epic job! I think the olive jerry cans actually set it off nice instead of all black too. Look forward to watching a few trips away in it and see how it evolves! Keep up the good work!
Thanks mate!! So keen to get it out!!
Chuck some silicone under the washers in the toolbox.
Hey bro loving the content… look up portable 12v jerry cans on RUclips you can rig up a little pump and have it attached to a hose to pump out water super simple or you can make it even easier and buy a “12v shower pump” that will go Inside a jerry can and you can just switch them between Jerry’s
Oh awesome I’ll look into that! Thanks heaps mate!!
Minticle bro! Love ya work. Gusseting the spare wheel carrier with substantial gussets along the line of the draw bar will assist. Possibility of the timy gussrts cracking when the big dawg is offtoad articulating. Other thing is gusset the A - frame with flat plates covering your joins in the dingle drawer tube to the hitch. Very interested to know the weight when fully loaded for a trip. Weight creeps up way quick. Cheers bro
Yeah definitely gonna take it over a weigh bridge soon! Maybe in the next episode I’m very keen to see how much it weighs!!
Been watching or a while some great ideas used for your build be nice to know what the total weight will be as a ready to go with water food etc what are your tyre pressures at the moment as with my continuing M416 trailer build had to drop my pressures down to 25 psi to get an even wear across the tread from my trucks 36 psi which is what I originally run keep the good work and videos going and waiting to see your truck and trailer used in anger out on the tracks
Looking mint bud. Whats the plan with tow hitch? Not sure if I missed that plan?
With the water jerrys you could possibly link 2 with a hose, stick a 12v pump and feed hose to the back the trailer and keep 1 jerry easy to pull out for grey water or water for diesel if he comes out with you guys?
The plan is to just run the pintle hitch for now and upgrade in the future to a DO 35 but they are just so expensive!!
@@RoamLyfe yea sweet. I’m hearing ya
that trailer looks so good man
Thanks legend!!
Look at ontap products jerry can/ 12v pump set up from Moreland 4x4 near Cotton Tree
How's the overspray on the rest of the shed like?
Why not lay the spare flat? tons of room and ta ra ra extra storage in the well. Just a thought.
Legend loving the video brah
Thanks Tim!
Close enough, go for camp!!!
Looking good mate 👍
Haha I’m thinking that!!
Such mint content! Good job boss keen for it to be done!
Thanks heaps legend!!
Farken mint 👌🏼
Cheers bull!!
Looks awesome!
Thanks mate!!
YEWWWW Looks epic mate! You’re making me want to get one now 🥵
Dude you should get one hey!! So tough behind the GQ
@@RoamLyfe I’ve seen a few pop up on market place, don’t you tempt me 😂
What’s the go with the tow hitch? Do you need a different tow ball ?
Yeha you need a special receiver!
Just go to bcf and get a 60l water tank and mount it under the trailer and hook up a 12v pump to a tap
I have a 70L but the way the trailer is designed it sits way to low!!
hey man, have you found any negatives about the front auto locker you installed? Also, love the videos man! Keep up the great work.
Top job cob
Cheers Dennis!
Looks good mate, keen to see pics of it behind coal 🤙🏼
So keen to go for a tow!
Key is in the prep and paint covers all sins. YEAH WOW! 👍How's the floor holding up with all this punishment? Found you channel looking for garage flooring ideas.
The floor is Actually solid hey! It has held up amazing for a DIY job!! Thanks for sticking around too!!
How does it mount on the lowball as I have noticed its just a big hole, does it just go on top of the ball or does it require a special one?
Yeah it’s called a pintle hitch, it has a large receiver that takes it! They are basically a very old school off-road hitch!
Looks awesome. Are you going to change the hitch?
One day I will but st the moment I can’t really afford a decent one!! They are stupid expensive haha!
I love that thing
Thanks ken!
@@RoamLyfe i wish i lived near you to buy it when you build the 2.0 version of it. You know you are because you enjoyed the build so much. Lol. Keep pumpin’ out the videos man.
Looks sick so far man, just wondering about the tow hitch ? What kind of setup are you going to run ?
For now I’m leaving but I’d love to upgrade to a do35! Just so expensive!!
Looks mint mate. Bet you are dying to get out and use it.
So excited to use it mate!!
Nice job man
Thanks James!!
🤘🏻
💂you could have ran the batt / light lead's up the center of the draw bar when you had it dismantled it would have been easy
🍻 💂
Personally I think the spare will bounce up and down and break it over time (front to back). I would have gone with two bits of tube for the wheel to sit on with a ratchet strap over the top. But it will last years as is anyway.
Okay I’ll be sure to keen an eye on it!! Thanks mate!
@@RoamLyfe looking forward to seeing it all set up at site
How about adding a mount for a fire extinguisher that will be readily accessible. Just added one to my camper trailer. Better to have it and not need it....
Stand the trailer on its end while working on the underneath.
Do a pump out the top
Thanks mate!!
MINTTTTTTTTT!!!!!!!!
👌👌👌
Why don’t you plate up the front draw bar
I was going to but decided to leave it open for now! If I plate it will be checker plate and might leave it chrome!
Crime would look sick 🤌
Caravan style hand pump
Great idea!! Thank you!
As for dirty clothes we use a old army style duffle bag and all dirty clothes go in there... makes life so much easier
Hey that’s a bloody good idea mate!!
why not have the spare tire low, sitting flat on the drawbar
It dosnt fit on the draw bar!! It hits the jockey wheel by about 100mm ! The spare tyre is quite big!!
Dude I think you spent to much on those fancy tyres, I mean you're just dragging it along behind you ,obviously if you're going off road you want a nice thick tread I surppose but I would just use regular off road tyres, nothing fancy ,hey but it's your money,
Depending what state you’re in you might not want to show that gel blaster.
Someone might have a cry abs report it.
It’s from a shop up the road from mine so it completly legal here in QLD
Hey mate, I sent you a pm to your Facebook page for a water solution