How to prepare a room for spraying
HTML-код
- Опубликовано: 6 сен 2024
- This video gives you an idea of how I prepare a room for spraying,
Orbital wall sander 150 grade
Pole sander for skirts 120 grade
Palm sander for woodwork 120 grade
Sponge sanding pad for woodwork 100 grade
Sandpaper used for rubbing down under window cills 80 grade
Most customers don't quite realise just how much prep work goes into decorating do they! But a good finish is all in the prep.
Most do not! Especially when it comes to masking.
This is exactly how thorough I am on my prep 👌🏻 even if I’ve done jobs in council houses. Nice to see Prep done properly unlike many house bashers on site. Great work mate 👍🏻
Thank you RIXY88 and thanks for watching 👍
What an awesome.channel this is. Thanks so much for putting all these great videos up here. Been learning so much from you.
Excellent video You do great work.Colin another great video. Your a grafter sir
Thanks for watching 👍🏾
Cam: I always carry a roll of thin white 10 or 15L bin bags and simply tape one over the entire light fitting after I've masked the rose. The light still does it's job and no overspray whatsoever. Also, I caulk BUT wash off using an old sash brush and a scuttle with water - saves the old finger tips when there's a ton of such to do.
Rich mog I've tried the sash brush I just couldn't get use it so I went back to destroying my finger 🤣🤣
just using wet rag, works great
You do great work. Nice clean prep.
Fabulous!!! Big thanks
Thanks Rachel
Does that caulk not crack eventually when it dries along the skirting? Our is there a trick in missing?? I've always struggled with this
great job, btw were do the circular sanding head from
www.belmoretools.co.uk/acatalog/Radius_360_Sanding_Tool.html
@@camdecorations9779 ta ill check it out
@@camdecorations9779 the Hyde ones are much lighter and cheaper on amazon
hey @cam - do you prefer to 1) prime before the trim goes on or 2) trim on then prime everything together
Prime everything once all the trim is in place 👍
Never tried using continental filling blades for the pins on the woodwork?
I find em a lot easier than traditional filling knives
Keep em coming Colin
Thanks dave
Colin another great video. Your a grafter sir. I ve owned the 360 sander for years love it. Although I ve got about 6 different power sanders I do fancy a cordless for convenience. What’s your thoughts on the De Walt ?
I've been toying with the idea of buying one myself , looks like an excellent piece of equipment but if you buy the wall sander you would have to buy the hoover and that's a lot of money just for rubbing down walls on site . So I'm still not to sure on it
That's some thorough prep mate 👍 I see the ensuite is masked up, how much you reckon it costs you to mask up your plots for spraying out?
A house that size which is a 5 bed townhouse two ensuits with the bathroom and kitchen your looking at 1 roll of paper. So £3.00 for the paper 1" tape is £1.25 . i get the masking tape for the sockets and switches for free but if I was to buy it its £3 a roll , so your looking at £7.25 to mask a house that large
@@camdecorations9779 fuck me that's cheaper than I was thinking, how long does a 5 bed take you with the sprayer? Still rolling out the walls for flashing?
Thanks...
👍
👍 cheers bud
Great job, what filler do you prefer. Thanks
I use easyfill , nice and easy to rub down but firm enough to stay in a hole
Excellent video mate where did you get the round ended pole sander
www.belmoretools.co.uk/acatalog/Radius_360_Sanding_Tool.html
@@camdecorations9779 thanks mate
I seen the shadow of a GoPro on your loaf of bread. Been after one for spraying vids for my FB page. What one are you wearing and how much did it set u back Cam.
I got it from ebay , you get a head mount a body mount, wrist mount for about £12
What pole sander is that! The bloody normal square ones have a habit of flipping and sometimes you can gouge the wall!
Its called a radius 360 heres the link for it www.belmoretools.co.uk/acatalog/Radius_360_Sanding_Tool.html
👍👌👍
Quick Q do you water down your paint if so how much
It does depend on what waterbase material I'm using but in general for emulsions I water it down by 20%
Good Evening Colin .haven't been youtube in while. Looks like missed a couple of your vids .tritech prime valve kit with pin .would know best place buy one .i cant find anything
Here you go mate
www.paintspraytools.co.uk/product/tritech-recirc-prime-valve/
@@camdecorations9779 cheers 🍻 colin great vid by the way , just finished watching this one👍
Thanks Naill
no worries buddy 👍
No worries bud 👍
What filler do you use mate?
I use easyfill on the walls and woodwork. Been using it for two years now , not a problem at all on the woodwork and as you guess nice and easy to rub down.
what cout4y so you live , it's not usa outlets! Europe? England .
I live in England, mate 👍🏾
That is a lot of filling for new plaster 😂
Honestly the damage that is done to the walls is ridiculous plus the plastering not the greatest either
Jesus those joiners don't like scribing!