Scratching And Healing My Own Car - How Protective Films Work
HTML-код
- Опубликовано: 28 авг 2024
- How XPEL ULTIMATE Paint Protective Film Self Heals Car Scratches
Brought To You By XPEL - www.xpel.com/
Subscribe for new videos every Wednesday! - goo.gl/VZstk7
Find An XPEL Installer Near You:
www.xpel.com/lo...
Transguard In Boise, ID
www.transguardp...
FAQs:
Is the film removable? Yes! The adhesive is well balanced so that the film is completely removable, but it adheres well enough that if it's installed correctly it will not peel up, nor will dirt work it's way under the edges.
Can areas other than the front, for example doors and rocker panels, be covered with protective film? Yes! Installers regularly cover the painted surfaces of entire vehicles (such as my S2000). And it's not just sports cars, they often fully cover pickups and SUVs, adding protection for work sites, off road, and on road debris. A client can have paint protection film put on as much or as little of their vehicle as he or she likes.
What is this XPEL ULTIMATE? Well it’s made up of three layers, plus a release liner. The release liner is about 3 mil thick, and is removed before installation to reveal the adhesive. The next layer is an acrylic adhesive, about 1.6 mil thick. The adhesive bonds the protective film to the car, but it also has a stronger bond to the film layer than your car, which means you could always remove the film down the line if you choose to. The second layer, and the meat of the film is a 6 mil polyurethane layer. This layer is important for energy absorption, so if a rock were to hit your car, the layer dissipates the energy across a wider surface area, and prevents your paint from chipping.
Now if you were to stop with just two layers, the urethane layer is porous. These pores tend to open up with heat, and close when it’s cold. As a result, you could get pollen, diesel exhaust particulates, dust, and other road grime that could build up in the pores, and eventually you would see the film start to discolor. To prevent this, XPEL ULTIMATE has one final layer, a clear coat about 0.5 mil thick. This top coat is a harder layer, but it’s still very capable of being stretched. The hard, smooth top layer makes the film more environmentally stable, providing self-healing properties, chemical resistance, oxidation resistance, and preventing contaminants from entering the film and discoloring it.
But of course the question you’re wondering is how does this stuff self-heal simply with the application of heat? From a physical standpoint, the important thing to understand is that these scratches are more like surface rearrangements, rather than tears in the film. The film can withstand a lot of pressure without tearing, though of course if you were to take for example a knife and stab through it, you cannot heal a tear through the entire film. Using a wire brush and creating surface scratches, what’s actually happening is the surface of the film is simply being re-arranged into a different shape. The film wants to return to its lowest energy state, but because it’s relatively cool, the film maintains the shape created with the wire brush. When you add heat, it allows the film to return to its lowest, flattest energy state, and once again it appears perfectly smooth and clear. You could almost think of it like an ice-cube, not a perfect analogy, but you can scratch an ice cube, heat up the scratches back to a smooth state, and then re-freeze it back to its original state. In a similar manner, heat allows this film to return to its original state. And it doesn’t even necessarily require a ton of heat, simple letting the car sit outside in the sun will let the film return to its lowest energy state.
Don't forget to check out my other pages below!
Facebook: / engineeringexplained
Official Website: www.howdoesacar...
Twitter: / jasonfenske13
Instagram: / engineeringexplained
Car Throttle: www.carthrottl...
EE Extra: / @engineeringexplainede...
NEW VIDEO EVERY WEDNESDAY!
I know Scott personally from the 2 years I lived in Boise. Great guy. Super professional.
Also, they can do just the front bumper to prevent rock chips and things for those of you that are saying it's too expensive
Would love to see a side by side comparing how deep of scratches you can put in PPF that would still recover with the heat gun vs. if you apply that same amount of pressure with same brush on ceramic coating and if it would scratch that surface.
Test please EE
It would 100% scratch the coating and even down to the clear coat
Just had the same Film for my JGC.....If you are buying new vehicle this is a good investment in protection of the leading edges of the hood and front fenders. I even went a bit crazy and added the A-pillar, mirror caps and the leading edge of the roof. The area between the windshield and the front of the moonroof. This film is pricey however if you get the correct installer that follows procedures it looks good.
After pick up I let it sit in the sun for about 12 hours a day for a week to help the adhesive set and cure. Good video as always!
The reason we didn't see his face is because he had his boo holding him closely, comforting him while he was scratching the hood.
doktorbimmer yet you are watching.... And reading comments.... I got it.
Fk off with your stupidity and watch the barbie dolls you prefer.
Awesome video Jason. I use XPEL Ultimate on all my cars. This product is amazing and is the best product on the market today.
Same here on all my cars.. I have like 1000 cars.. not 2 or 3 .. May be you have 5000
I can't speak for Xpel, but I have a 3M equivalent, and I'll say this. I had someone run into the front of my car and tear through the film. Stretched and peeled, did not look pretty. Kept the paint fine, worth every penny. The whole bumper would have been repainted had I not had the ppf
I had a protection film on my previous car. I found it did little to protect the paint from cracking under the film from stone impacts. Some stones tore right through the film as well. The film itself would get scratched, scuffed and discolored, and couldn't be polished like clear-coat can with a buffing tool. The film tended to peel at the edges over time. It did little to really protect the paint, and left nasty adhesive behind when the damaged film was removed. This required repainting of the entire area under the film later. So nothing practical was gained. I would not waste my money again.
Vince Zampella How much did it cost to wrap your car with the 3M equivalent?
R D that doesn’t sound like you used XPEL film.
My dad is getting this on his van and we are so excited for it! It’ll be ready in 2-3 weeks
I'm currently 3 weeks into training in installing xpel ultimate at my job and I got to use my car to train for free 😂
INCREDIBLE EXPLANATION!! I was looking through many pages for the PPF issue and you gave me data that I could not find.
Good explanation friend !! Greetings from Mexico!
I would expect this process to be of interest to auto manufacturers. Where body parts can be covered via automation before mounting on the car. They could probably sandwich another layer of Color under the clear coat. Also, if the color layer is truly protected by the top layer including from UV. Then a new body part can be mounted to replace the damaged body with out dealing with the rest of the body. How long does the film last? Does it adhere to any surface aka: Aluminum or Carbon Fiber?
I wonder, how hard would it be to peel off the original film for replacement and give the auto a new or different look. The possibilities are endless if this product IS what you state.
6 month update on how its holding up would be appreciated. Planning on getting this for my dad's new Mercedes.
Like applying a giant screen protector on to your car
Explanations For Dummies
Thank you for this video. Just got a new 2020 Civic Si and stressed over keeping it looking flawless for as long as possible.
To keep costs down you could do the front in PPF and the rest of the car in a ceramic coating.
Have the same film. Protects the paint well. Paired it with quartz ceramic coating as well. My 1st uploaded vid shows how car looks after the work is done.
Great move!!
where was this when my ex keyed my car!!!!!!!!!!!
It wouldn't have helped if they went all the way through, anyhow.
@@TestingPyros In most cases, the film is ruined but it can save the paint. peel that particular panel off and the chances are the film done its job.
That usually means you cheated on her. Correct?
@@TheWildernessEnthusiast or that she's just crazy lol
Did fixing the keying cost around $1500-$3000? Because this is what this film costs to protect.
You can also wrap your car, wrapping can be done in any colour too. I have pearl white on my car but it's more for design lol. I got my wing mirrors roof and partial Bonet wrapped.
I'm not going to lie, watching a car get scratched was pretty stressful
This looks to be some pretty neat stuff not hating on it a bit. I think it is a great protection option for a car that has a near flawless finish, is a high dollar car that you generally won’t see in the local Walmart parking lot (at least not around my neck of the woods), or never will see serious “off road 4x4” driving. Nothing was mentioned about cars that have existing paint chips in the finish, or deep scratches below the clear coat that have penetrated the base coat. Correct me if I’m wrong, but this product can’t fill existing deep scratches or chips, it will cover them, but will most likely look like a bubble under the surface. I’ve had surface scratches on the clear coat that were equal to the wire brush scratches, and was able to buff them out with liquid magic (a liquid 15000 grit auto body buffing solution), the cost for this was $30.00 and about 15 minutes. Using a buffer and good polishing compound has the same effect, it produces heat to the clear coat to soften it to a degree, and the 15000 grit polishes out the scratches, while only removing a small amount of clear coat material. If you don’t know what you are doing though, you can “burn” or “cut” through the clear and base coats. The cars that were used in this video were relatively small cars and took a lot of time. as he said. I bet it would cost more then a few thousand $$$ to have my ‘17 Raptor Supercrew cab done. Seriously, I’m very curious to see how well it holds up to the rigors of driving on narrow off road trails where low branches tend to hit the sides of the vehicle that normally mar or scratch unprotected finishes. Can anyone who actually has this applied or an authorized dealer give me some insight to the questions I posed, especially the part about off road driving. It could be worth an investment.
wow I'm surprised the scratches really disappeared that quickly and easily. I'm interested to see what happens when you try scratching with something like a key or a nail.
Does this stuff remove the need to wax your car?
I know it's on there but seeing that makes me cringe
Kaleb Z He had to do it for science! :(
5:07 clear bra
i approve this shop.
emperorSbraz world needs more clear bras
This video was so soothing to watch. Great one Jason!
This really pushes me to wanna refinish my semi mint\ E36 front end and put XPEL on it, Awesome job.
This plus an under body spray would really help prevent rust, especially in the northern states.
It's not a scratch. It's just a surface rearrangement! Haha best line ever
Next video ceramic coating on top the clear bra plus explain?
But, scratches and chips on a sports car are badges of courage. It shows the owner is actually enjoying their car(s)! I have to admit, I wish I could've done this when my Vette was new.
People in Vegas and Phoenix don’t even need a heat gun, just wait til summer and leave your car outside
1:24 "Oh god, scrape that across."
Very cool... another analogy is a Zamboni, but without the auger scraping the surface of the ice.
hey jason! would you consider discussing how does the D'Alembert principle apply to car dynamics? It would be really interesting to study how does force, mass and acceleration relate togheter in cars! Thanks!
i love mine. i can use the brush at the wand wash on the wrapped parts of my car with out worrying about scratches; and it saves me so much time compared to hand washing the whole car.
The adhesive won't harm the paint job after being on for 10 years, then removed?
Seeing you use that brush on the Crosstrek was hard to watch, I was imagining my own car being scratched!
Do a video on ceramic coats tooo! Very informative..! 😎
Small world. I was just doing my homework on PPF and I happen to also live in Boise!
Are you seeing any 'Orange-ing' with your paint? Almost and orange peel type of finish as with other paint jobs?
can you still wax and polish your car, or is this like vinyl wrapping where waxing actually damages the film?
WAX
Thank you for posting this detailed & easy to understand explanation! 🙏🏼
What I like to know on this stuff is this.. does it change the color of the paint slightly? Can this be waxed over and can it look the same as if I were to clean, clay, polish and then wax a normal car to bring out the shine from clear coat?
I know they clay it and polish it to clean the paint..But certain waxes or even ceramic coats enhance the paint appearance afterwards. I like to see two of the same cars, one with and one without and see if you can notice the difference.
WAY better film and production. You've been doing really good.
Would've loved the word '*SPONSORED*' having an explicit mention in the video or atleast in the title. I'd like to know if I'll be watching an 8 min advert upfront. Thanks
so basically, the top coat just gets pushed into the poly, which then pushes the top coat back into the normal position when the poly warms up? pretty cool. i didn't know that they had a film that could take that much abuse... i would think that it would scrape off and remain visable after the poly returns back to it's original shape. maybe i am overlooking the fundamental mechanics of why scraping actually removes material that is otherwise too hard to cut.
Too expensive for regular cars.
Bhavin Tolia I agree. Much better for collector cars or super cars
Says who? Ive seen protective films on everything from a 2017 base model Civic to Subaru WRX's. Its probably one of the smarter things you can do to a new car. Retains value.
Normal protective films are more than affordable, but full Xpel wraps can cost upwards of $5,000.
I agree, if you're buying a throw away vehicle or if you know you'll be getting rid of a vehicle in less than 4yrs time, then yes, this isn't nessassary.
However, if you have a vehicle you like and you're planning on keeping it around for at least a decade, this is a worthwhile investment. Especially if the vehicle will be seeing harsh environments.
As soon as I put my order in for the Tesla Model 3, I will be getting an entire wrap done. My current daily has seen 242k over 9yrs and I pretty much have to do an entire paint over the whole car. Canadian winters and daily commuting is brutal on a vehicle.
Yes, you could repaint in 6yrs time. Even change the colour. But would you want the hassle of being without the car for any sort of time? Not to mention "devalue" it since its been repainted. All those things get taken into account. Nothing is like factory painted.
Dents and dings are something you'll have to deal with. But more annoying is seeing light scratches if not deep scratches on paint. Drives me crazy.
Taking it through car washes without a care. Never have to wax it. So much time can be saved by getting this done.
Thanks to EE's video I had XPEL installed on the front of my new, relatively expensive car a week after buying it. [bumper, lights, front half of hood] It looks great and despite there being a bit of a line where the XPEL ends on the hood, it's no more visually unappealing than having a bra on it. In hindsight I might have just splurged to have the entire hood done.
Should have gone for full hood buddy :)
5:59 "soapy wooder" 😂😂😂
So when it goes through a car wash...this thing doesnt get all fraked up?
Nope, had it installed on the front end of my SRT Charger for 4 years. Many car washes later and it stayed put.
Just thinking, hot brake dust gets thrown from the brakes and gets embedded on the paint of the car. Usually I use a industrial cleaner which dissolves. If you don't remove it you see the dust\other material from the brake pads oxidizing on your car paint. looks like your paint is rusting. So how does this clear coat handle this condition?
What is better to protect your vehicle paint protective films or ceramic coating? maybe you can do a video on that..
Can you do an explained on wheather cuting hole is the fake part of the grill helps performance such as the bottom part of the fiesta st grill is sold while the top is perforated would perforating the bottom help or hinder the cars performance
Thank
Great videos keep them coming
Do an experiment for us, scratch a panel of that test bar in the shop over and over like 20 times in the same spot hard and see if it still removes it completely or does wear start to show.
This is sick. This film will make me invincible!
NOPE
How much does this cost for a car that has templates available?
1:21 the sound of car enthusiasts everywhere crying
You should get the license plate mounting holes in the front number filled. It would look a lot cleaner. On the S2000, that is.
I was looking for a way to protect paint off-roading, however after seeing installation realized I could have a few cheap paint jobs also.
The new wheel color looks amazing!
Never realized you were in the Boise area, let me know if you ever want to review a Fiesta ST. Love your videos man, keep it up!
What's funny about the "healing" ability is almost every ppf does it and was probably discovered by accident since it's a property inherent to the film .
This stuff self heals? Hmmm, if I liquified and injected it would this turn me into a pre adamantium Wolverine?
The market on a regular panel you could get off and the scrapes you put into the xpel could be wet sanded and got out
Ok I appreciate the info on PPF. But that permanent marker stunt.... Did they pay you for that specific one? Sharpie is an alcohol ink. Put it on raw paint and drip alcohol on it, and it comes off just the same. While alcohol does act as a rubbing compound on acrylics, oil based paints, enamels, etc... It does minimal damage to the urea / water paints we now use on cars after the EPA banned the use of previously used solvent based paints that had environmental concerns. In fact, we use alcohol to remove overspray after touchups or panel repaints if some of the masking lifts and lets some mist under it. Its just aggressive enough to get the spray to let go while doing little to no damage to the coat under it, granted everything has fully cured. We've also used alcohol to remove spray paint from a vandalized car, using an alcohol soaked closed foam pad on a random orbital rotary buffer. This dissolves the pad after a few minutes, but done in a timely manner, its fine. No aggressive cutting compounds or polishes, which remove some of the clear coat during use, were needed.... But going on a tangent here... Sharpie and alcohol should not be used as a boasting point for PPF. It has the same affect on raw paint. There is one exception however. Ethyl alcohols cause a problem with carnauba based waxes. If you have wax on the car, with carnauba in it, applying alcohol to it will cause a chemical reaction that converts the carnauba into a non soluble compound. Even hexane has trouble breaking it down. It also strengthens its bond to the paint. If you were to get some of that wax on a plastic piece and it rained for a whole day, hazing the plastic finish as water got into and under the wax, and you used ethyl alcohol instead of mineral spirits to remove it... Well, congratulations. You are now the proud owner if gray and white tie-dye plastic trim for the next few years, till it naturally wears off on its own.
By the way props on the brass balls for taking that brush to your toy.
Sorry for off topic, but could you please explain what happens when you turn off the engine with the automatic transmission in drive? I mean what mechanically happens in the moment, not what can happen afterwards because it's not possible to remove the key unless you put it in park. My mom does this sometimes and I want to explain to her why she shouldn't do it. It's a "tiptronic" planetary transmission, so no double clutches or CVT stepless transmissions. Thank you very much.
If I ever buy a new or gently used car again, I am clear bra'ing the WHOLE DAMN THING. Yeah it might cost as much as $5k, but you can keep your paint looking brand new for 10 years and take it through any car wash as much as you want, without getting swirl marks.
You can remove permanent marker using dry erase marker. Just mark over the permanent racer and then you can wipe it off it works on Windows in a lot of other things but I don't know if it'll work on the car
I've always wanted to try XPEL, but when I got my ND Miata there was no installer near where I live so I give up. Recently a new shop with trained XPEL installer just opened, and since I already put an order down for a 2018 Mustang GT, I think I'll give it a go. Just one question, would you suggest wrapping the whole car or just the front end (front bumper, hood, fenders and probably the roof)?
How much of that orange peel was added by the film or is that all from the factory clear coat?
For UK people I had this done on my STI last week. Front bumper, mirrors, partial bonnet and wings - £650
You should do your next dry erase board drawing on the hood of the S2000, for a dramatic effect.
Was the first protective mod for my 2011 STI : ) still lookin' good too.
My car has the Xpel delete option for weight savings.
you love chips?
Getting my 2020 GTR done soon, thanks for this video!!
Hey thought I saw you on Eagle the other day man, cool to have you around town love your videos.
Had mine done today. Well worth the money!
What about black cars and hot days?
The color of your car does not matter. You are not scratching your car.
Not sure what the question is, but it's no problem.
Ohh, are you worried about the film overheating?
Yes... i had my black S2000 nano-sealed ... but once on a hot day, i cleaned it and the black looked wierd. After it cooled down in the garage it looked normal again. So i wonder if this can take some heat without "melting away or something ^^
Yeah good question, would it bubble up or melt for example. I guess it would at some point.
To be true to myself I rather go with a good brand name paint protection film. The ceramic coating is a little too much binding to the paint. In my opinion after all the research/homework I would go with the paint protection film of I had too choose. 😯
I was debating on getting it done. But thanks to ee now i will get one too.
S2k looks sick man
what happens if you already have stone chips on your original paint? say you do add a wrap to the car with stone chips repaired from paint sticks, if and when the film becomes damaged and needs repair, will pulling the film off pull the factory paint off in the stone chip areas?
If this film only protects against "surface rearrangement" scratches, would it really be all that useful? I feel like the only application would to protect from running into your garage. Any serious scratches would just tear through the film, no?
I have see this XPEL protective film in one of Saabkyle64's video.
This sounds pretty damn good for 100k cars, or even Uber cars.
Man i love this guy. He's so solid haha! My heart was almost racing watching you scratch it. Im glad you didnt do it to tge s2000
cool video as always. But environmental particles, such as dust, PM particulates, pollen and other particles, aren't the only reason for discoloration. If the adhesive is of poor quality, under a lot of sun light exposure, the adhesive will discolor as well. This could leave permanent damage to the paint. Again, that's if the adhesive is of poor quality, and not resistant to sun light.
It's funny that water and dust repellent properties weren't mentioned. Usually these type's of car protecting films come advertised with an array of such properties. I've been considering putting film like that on my car, but where i'm at dust is more of a concern. Unfortunately, I can't really find any info on how the film will hold up and deal with accumulated dusted. Like what you may get from a light sand storm. and for the cost of partially coating or fully coating a car, that a big investment on something that may not help much. I wonder if you could let one of your cars get a little dirty, and see how easy does the dirt get cleaned off =)
While accumulated dust or dirt or sand doesn't have a particular affect on the film, operating a vehicle in areas that have lots of dust or dirt or sand can indeed cause more wear and tear on the film. But it's worth noting that even on vehicles operating in dusty or sandy areas, and even though conditions might be unusually harsh in some cases, the film has proven to do an excellent job of protecting the paint. So even though the film might take more abuse in one situation versus another, my experience in the 16 years I have owned a shop is that vehicle owners almost always look back and are glad they had paint protection film installed--that's assuming of course that the film is of good quality and that the installation was good. If you take either of those things out the equation you are likely to have, or have had, a bad experience.
Can you please do a review (an actual review, not an overview labeled as a review like everyone is doing) of the 2018 Mustang GT? I already own mine but I'm still interested in reading some reviews. :o)
Just recently bought a compact SUV and seeing this video made me want to have xpel installed on it. I wonder how much it would cost though...
$100-$5000
That's sweet. I'd spend that on my truck I hope to hold onto it for at least 20 years
My biggest concern is that it gets really really soft at 60-70C wich can occour when you leave your car in the sun
That looks like a ton of work. Is it still cheaper than getting touch ups every year?
Full body cover will set you back 4 grand, so it depends how flush you are...
i mean, the fact that you donta have to wait to do touchups is one of the best things about it. Its always nice
Would be cool to get some of it cut custom and attempt a self install. Maybe just simpler areas like the roof, or doors.
07wrxtr1 They sell precut kits for DIYers.
This is really good thinking product, thanks for the heads up.
i ordered that same heat gun, what temp did you set that gun to? awesome video
Oh man music to my ears 0:48
What is the highest temperature it can handle outdoors? If it's too hot outside will it be shrinking too much?
I am in love with ppf. Made my life easy.
Jason,
How is the film holding up 4 years later?
You do know that Sharpie can be removed by alcohol from any paint non porous paint right?
what happens if you want to repaint? Will peeling off the film leaves sticky stuff on the surface?
How much would this cost for an average consumer?
is self healing meaning that it is full of nano particules ? i would like to know what happens at a molecular lvl