Join me on East Coast Mainline for a cruise with the LNER Class 801 AZUMA including safety systems and how to reset from a vigilance stop and a TPWS event.
Just bought this yesterday Do you have to switch on the safety systems behind the seat to get it going just out of interest? Looks a very good simulator 👍
You don't need to turn on the safety systems on most trains (there are occasional exceptions where they're on by default like Swiss trains). It's a fairly good compromise between simulator and game with enough challenge to satisfy most simulation users and enough fun to satisfy most gamers
You dont really NEED safety systems like AWS or PZB or SIFA, but you still need to be aware of the upcoming signals because if u get an SPAD then you will be kicked to the main menu
I did it in the tutorial (at least I hope I did) but you would not be able to see the switch as it is behind the fireman's leg. Walk over to the firemans side and look at the side wall under the window. You will see the isolation switch there. I'll be driving Scotty on my stream in the morning tomorrow.
On the big HUD there is. On the current minimal HUD no there isn't. We've seen a new version of the minimal HUD where you can optionally have it show the speed. I prefer to use the speedo provided as part of the train cab.
Yep that's what they're meant to do. DSD requires the driver to press down a pedal. So if you stand up you're not pressing down the pedal so the train stops and beeps.
Its a rail safety system designed to implement unity of train control and safe working across Europe. You can read about it at en.m.wikipedia.org/wiki/European_Train_Control_System
Literally just want my sons to be able to get in put the pantograph up and drive the train forward….
how did it end up down? It normally starts in the up position
Just bought this yesterday Do you have to switch on the safety systems behind the seat to get it going just out of interest? Looks a very good simulator 👍
You don't need to turn on the safety systems on most trains (there are occasional exceptions where they're on by default like Swiss trains). It's a fairly good compromise between simulator and game with enough challenge to satisfy most simulation users and enough fun to satisfy most gamers
You dont really NEED safety systems like AWS or PZB or SIFA, but you still need to be aware of the upcoming signals because if u get an SPAD then you will be kicked to the main menu
Hey Paul, does this train throw any sparks up on the wires? Great vid!👍
I'm pretty sure I've seen a screen shot with sparks. Try it in the wet or snow in dark to maximise the opportunity.
Azummaaaaa
And what does an Azuma do? Zoooooooooooooooom.
aZOOMa@@trainsimulatordriver
@@Eriklovisa lol yes
Wait so do I just press the yellow acknowledge button every time I pass a yellow signal, to prevent the train from automatically stopping?
Every time you hear the tone or see the sunflower light up. It's triggered by an device between the rails. Not every signal has one.
Hi, i have doubt, can we run all the previous DLC'S on TSW4?
Yes everything from TSW2 and TSW3
Can you do one on enabling aws on the flying scotsman can't find the switch anywhere in the loco
I did it in the tutorial (at least I hope I did) but you would not be able to see the switch as it is behind the fireman's leg. Walk over to the firemans side and look at the side wall under the window. You will see the isolation switch there. I'll be driving Scotty on my stream in the morning tomorrow.
You may not have seen this one ruclips.net/video/6u_drqHZZ5M/видео.html which is the FSCT Tutorial
Is there a speedometer on the dash like the previous TSWs
On the big HUD there is. On the current minimal HUD no there isn't. We've seen a new version of the minimal HUD where you can optionally have it show the speed. I prefer to use the speedo provided as part of the train cab.
When i put on the safety systems on this train and move the train it automatically stops and when i leave the seat it the train beeps
Yep that's what they're meant to do. DSD requires the driver to press down a pedal. So if you stand up you're not pressing down the pedal so the train stops and beeps.
Thanks
What is the purpose of the ETCS safety system?
Its a rail safety system designed to implement unity of train control and safe working across Europe. You can read about it at en.m.wikipedia.org/wiki/European_Train_Control_System
And is there cab lights on this train?
Yes there are. There's a switch but if you can't find it press L.
Did u play from ps5 or pc
I run PC and Xbox/S mostly. I do have the game on PS4 and 5 but they're my son's so I can't hook them up for streaming or recording.
my pan just won’t go up.how do i solve it?
what happened that it went down?
This is TSW4?
Yes