You can't be using this music LOL.. this is the same song that LA BEAST would use when eating light bulbs, cacti, etc. It's literally all I can see when watching LOL
I've used stainless fine steel mesh to repair heavy items but for me the real genius here is making the copper pipe into flat iron. So simple and obvious but I never thought of that, bravo!
I was thinking not many people have copper tube laying around, but most people eventually wind up with multiple redundant flathead screwdrivers over the course of their lives, just from them being included in furniture kits etc. Could saw the handle off one of those and use the flathead tip.
Great Idea! One note, you should try to match plastic types. The second thing had a label that said PP (polypropylene), most zipties are not PP. most plastic things will have the recycling label somewhere, just try to match plastic types for a more durable repair
I’ve seen mini mini welding videos, but using steel wool is the best idea I’ve seen yet and now I feel I can confidently repair my plastic now. Thank you!
@@321tips ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
I think the real genius is using the coaxial mesh instead of the steel wool and the modification of the soldering head is absolutely genius. Thanks for the video.
Started like that, but then switched to using fine steel wire mesh (originally intended for filters). It can be ordered from Ali virtually by meters and is relatively inexpensive.
@@matthewsequoyah2665 All steel filter meshes I know and ever had are / were stainless. Should you decide to order a non-stainless steel filter mesh, you will have to search hard.
I’ve done plastic welding with my soldering iron and used zip ties before, but rather than making a new tip out of microbore copper pipe I just turned the existing soldering iron tip round and filed the opposite end down to a flat surface. I’ve tried sections of paper clip across the joint to strengthen it, but never thought of using wire wool - genius idea
I've been welding plastic for a few years with a soldering iron and standard tip but the flattened copper pipe is just magic, seems to work so much better. Also the steel wool is a genius idea, thank you for both tips.
I've been welding plastic for a few years with a soldering iron and standard tip but the flattened copper pipe is just magic, seems to work so much better. Also the steel wool is a genius idea, thank you for both tips.
Fantastic! Very inventive. I have bought several Plastic Repair tools/kits that were useless, they did not work very well. Your methods here are the best I can imagine.
Adding plastic might be appropriate for thinner materials, but I repaired a cracked tank on my old dirtbike by using the traditional chisel shaped tip to melt a bevel into the material, pushing the excess plastic out forming a line of filler on either side of the bevel. Then heat up and push the filler back into the bevel, forming a fresh, intact, full depth repair with the original material. Good as new after a little sanding with graduated grits until reaching a finish closely matching the rest of the 20 year old tank. :)
Yes, a plastic KDX200 fuel tank. Plastic welding is just as strong as the original molded plastic if done correctly. But this wasn't a structural part of the tank anyway, just a crack around the fuel cap area.@@apennameandthata2017
I bought the harbor freight iron. Fixed some large totes that had become quite damaged. Sharp learning curve but not a problem. Next is the heavy plastic bin from my wheel-barrow. It has a lot of damage. This is a great video. I used window screen, but steel wool looks better
I have used used patio door screen for repairs to cracked garbage can lids with a soldering iron, worked GREAT. Thanks for tip on flatting copper tubing for making the tip.
Hadn't seen the electric cable wiring before. Bonding two pieces of plastic with a heated piece of flat metal was pretty cool. It ensures both sides are melted at the same temp for a solid bond. Niceee.
Superb! For large repairs I use some of that black sanding mesh then iron on plastic of the same type if I can find it. The mesh gets hot enough to melt into the surface without being destroyed itself and it really keys well due to its rough surface. I also use wire wool and cyanoacrylate to build structure. You get some working time to mold shapes but the reaction gets very hot and can combust so always use metal tools to sculpt fillets or fill holes etc.
I can recall trying to melt cracked edges back together with a soldering gun, etc. Never really a success, it would still crack again that way. The idea of adding more plastic and metal strands of some kind looks like the fix, I never thought of that. The fallback was something like using epoxy but then that does not always adhere well under stress so the welding method is superior.
Żywica będzie dobrym łącznikiem o ile zostanie użyta do sporządzenia laminatu. Pękniecie, pierwszy przykład z filmu, trzeba otoczyć po lewej i prawej stronie szeregiem nawierconych otworów o średnicy 3mm a powierzchnia pękniętego plastiku powinna być zmatowana papierem ściernym i odtłuszczona. żywicę nakłada się jednostronnie przykrywając ją paskiem maty z włókna szklanego dokładnie przesycając matę żywicą, to samo robimy z drugiej strony tym razem również przesycamy żywicą matę szklaną tym razem dbając o dokładne wypełnienie nawierconych otworów. Dobrze jest gdy żywica zawiera drobno pocięte skrawki włókna szklanego. Po związaniu żywicy można powierzchnię obrobić mechanicznie, czy lakierować uważając by nie uszkodzić pasm maty szklanej.
I just took up welding plastic and I'm learning new tricks everytime I like the soldering iron Trek I just use a blowtorch and a hot knife so watching your video is a step up for me 😁👍🥃
So the steel wool and shielding wire are acting like the fibres in fibreglass. Cool. I like the do-it-yourself plastic melting copper tip, too. Good job.
You can repair some broken plastic items by binding the break with string and covering with hot melt glue. Similar repairs can be done with flyscreen and glue (petmesh flyscreen is incredibly strong), or cotton thread and glue, or hootchie cord and glue, etc. safety note: steel wool can give you a nasty cut if you tear it apart with your fingers with great force. Either tear it gently or cut it with a tool.
What the mute isnt telling you is that if you have a polypropylene lid like this and you take a nylon zip tie and try to melt it on there its prob not going to adhere. If it does its prob adhering to the steel wool. You need polypropylene to repair PP. Nylon for nylon ABS for ABS and PVC for PVC. And so on. You can buy multi packs of plastic welding rods on line. Or from ww grainger some harbor freight stores sell them as well. Most household plastics are PP. Check the recycle codes if you arent sure what plastic youre working with.
@@321tips if you do enough of this youll find yourself popping out answers to questions in conversations you werent part of. Ive caught myself doing my own thing and hear folks saying what does this triangle with a 4 or ? In it mean? Next thing im teaching a damn recycling training seminar. If you get into doing this look online if you do that sort of thing and buy a big ass package of welding rods with a plethora of fifferent plastics. It will make or break a project envolving non replaceable items. Car bumpers nose skins some fenders dash boards they can all be repaired. I hate buying crap online. Ww grainger has a good variety of rods. Craft stores may have them.
Very often these repair videos are just nonsense - but not this one. I already use ski base sticks (P-Tex candles) to weld plastic, but zip ties and wire wool/mesh was new. It's not often I bookmark videos any more but I will this time. Very helpful, thanks.
My father showed me hot knife plastic welding years ago... it doesn't always work, but can be handy. I've seen hot staple type hacks before, but the wire wool is a pretty good idea
A note to everyone: steel wool is flammable. I know it's hard to believe but it is. An open flame will ignite steel wool. Using an hot iron is probably safe. So use with caution and in a way you could put out a fire. Great idea though I would of thought of it, and really like the shielding wire method at the end. Good video
Obrigado! Me inscrevi no seu canal! Você deu dicas e vou utilizar para soldar os plásticos de uma carcaça de notebook que quebrou na área da dobradiça com a tela.
I think the added bonus with using the steel wool is its ability to transfer the heat better. Just like the elementary school science class when you take the same wool and spread across the battery posts…INSTANT heat! And using stainless steel wool would reduce the possibility of rust getting in and weakening the weld!👍
Bro, that's not how ANY of this works. Steel wool gets hot when you connect battery posts because you've made a short circuit with electricity. The heat transfer rate of the steel has nothing to do with that situation, you would get the same heat from any conductive metal. Plastic welds don't care about rust. It's plastic, not steel. You could use any metal wire and get the same, negligible I might add, benefit to these "welds" that are all completely useless functionally. You can't just melt random plastics into each other and expect proper bonding, much like you can't weld random types of steel together and get good results. I know I'm wasting my breath, but for anyone who has no idea how to do this. Don't watch this video for advice.
the steel wool is a great idea of reinforcing the fissure. you can also use a 3D printer pen if you just want to fill holes with ABS. (And pick a color of ABS you need)
So does crazy glue, but imo you need to actually melt the parent material to truly bond a crack in plastic. This kinda seems to do it. Don’t you think?
other note besides the plastic types: common fine steel wool like that is carbon steel, it rusts very easily, so if the object gets wet, the exposed filaments will start to rust throughand create expanding cracking rust voids. coarse steel wool pads used to clean pots and pans are stainless steel, I'm not aure if stainless steel wool is also made in fine grades. what is made as an alternative to fine steel wool and would oxidise more moderately is bronze wool. it's meant to be used for finishing tanning-rich woods like oak that would get black spots from steel wool fragments.
Es la mejor idea q he visto para reparar los plásticos y así darles una nueva vida sin desecharlos!! Felicitaciones por el video es genial!! 👏👏👏👏👏😃 muchas gracias por subirlo!
* a good use for coax cable braid * going to try the techniques demonstrated in the video for repairing plastic taillight lenses, plastic totes, and even vinyl items
I think you will like this one ruclips.net/video/6WnSUOfx8CE/видео.html and ruclips.net/video/pZNBJMoQVHY/видео.html
You can't be using this music LOL.. this is the same song that LA BEAST would use when eating light bulbs, cacti, etc. It's literally all I can see when watching LOL
Great job but please be careful with these fumes as they can be incredibly toxic
Warnings fusion of plastics at lower temperature produces toxic dioxine
Stahlwolle .. super Tip danke
Grazie
I've used stainless fine steel mesh to repair heavy items but for me the real genius here is making the copper pipe into flat iron. So simple and obvious but I never thought of that, bravo!
cool you are very kind
Que lo que?
I just came to say about using Stainless Steel mesh, as it doesn't rust. Rodent control mesh is pretty good for it.
You never thought of it because you would probably buy the right tool for that. 😁
I was thinking not many people have copper tube laying around, but most people eventually wind up with multiple redundant flathead screwdrivers over the course of their lives, just from them being included in furniture kits etc. Could saw the handle off one of those and use the flathead tip.
Great Idea! One note, you should try to match plastic types. The second thing had a label that said PP (polypropylene), most zipties are not PP. most plastic things will have the recycling label somewhere, just try to match plastic types for a more durable repair
Thanks, definitely the ideal is to use the same material
Great tip!
Smart observation
How do you repair colored transparent plastics?
@@legalize420 The same way you repair caucasian transparent plastics, but with more melanin.
Using the metal from the steel wool and the wire sleeve like concrete rebar.
*Excellent idea*
Thanks for commenting, you are amazing!
I’ve seen mini mini welding videos, but using steel wool is the best idea I’ve seen yet and now I feel I can confidently repair my plastic now. Thank you!
There are many tips, subscribe and enjoy
Looks great.
I used strips of metal screen to fix a car bumper, less apt to rust if it cracks & gets water in.
I've seen the zip ties used, but imbedding the steel wool is a fantastic idea. Thanks for the video
thank you, you are very kind
@@321tips ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
@@1islam1Q?
What kind of tape is that?
I'm welding large 3d printed models all the time, have to admit it never occurred to me to melt in steel wool Extremely helpful, thanks
for sure
Both the steel wool and the wire shield are great ideas. Thanks for sharing.
There are many tips, subscribe and enjoy
I think the real genius is using the coaxial mesh instead of the steel wool and the modification of the soldering head is absolutely genius.
Thanks for the video.
Videos like this make the hours of endless and mindless scrolling worth it. This is actually a valuable skill to have on the mental toolkit.
Thank you for your comment, hope to see you in the next 321Tips
Started like that, but then switched to using fine steel wire mesh (originally intended for filters). It can be ordered from Ali virtually by meters and is relatively inexpensive.
Thanks for commenting
Seems like a better idea thank you for your comment
This is cheaper though so a judgement call
Fantastic idea. 💡 Stainless steel mesh to minimize the possibility of RUST.
@@matthewsequoyah2665 All steel filter meshes I know and ever had are / were stainless. Should you decide to order a non-stainless steel filter mesh, you will have to search hard.
I've had a plastic welding job that I have been putting off. Seeing you using steel and the copper welding tip is genius!
I’ve done plastic welding with my soldering iron and used zip ties before, but rather than making a new tip out of microbore copper pipe I just turned the existing soldering iron tip round and filed the opposite end down to a flat surface. I’ve tried sections of paper clip across the joint to strengthen it, but never thought of using wire wool - genius idea
Excellent! I love the "rebar" reinforcement with the steel wool, etc.
Being in the construction industry for 40+ years, I have seen some ‘re-bar’ jobs that look just like this!🤣🍺🇨🇦
There are many tips, subscribe and enjoy
That’s awesome.
Where has this been all my life?
Thanks.
Knowledge must come gradually so as not to frighten
I love these kind of channels. Because this isn’t something scripted, it’s just someone constantly getting better at a skill, and sharing it. 🎉🎉🎉
Thank you for your comment, hope to see you in the next 321Tips
never thought of using steel wool or coaxial cable, always used staples i like your method
now impress us all by softening old brittle plastic
I'm going to make a video just to please you, hahaha
@@321tips i'll be your humble servant
Excellent technique. Nicely filmed. Thanks!
ok thank you very much
Finally some quick/short tips that are actually useful! Thanks for making me just a little smarter!
I've been welding plastic for a few years with a soldering iron and standard tip but the flattened copper pipe is just magic, seems to work so much better. Also the steel wool is a genius idea, thank you for both tips.
I've been welding plastic for a few years with a soldering iron and standard tip but the flattened copper pipe is just magic, seems to work so much better. Also the steel wool is a genius idea, thank you for both tips.
@@321tipsyou 2 are on the same wavelength
Check out the HF wood burning kit. Lots of tips
The steel wool idea is brilliant! Bravo!
There are many tips, subscribe and enjoy
Fantastic! Very inventive. I have bought several Plastic Repair tools/kits that were useless, they did not work very well. Your methods here are the best I can imagine.
Thank you for your comment, hope to see you in the next 321Tips
That’s absolutely brilliant!! Thanks for the great tips. I want to mend some plastic now lol.
Adding plastic might be appropriate for thinner materials, but I repaired a cracked tank on my old dirtbike by using the traditional chisel shaped tip to melt a bevel into the material, pushing the excess plastic out forming a line of filler on either side of the bevel. Then heat up and push the filler back into the bevel, forming a fresh, intact, full depth repair with the original material. Good as new after a little sanding with graduated grits until reaching a finish closely matching the rest of the 20 year old tank. :)
Hopefully not the fuel tank!!!
Yes, a plastic KDX200 fuel tank. Plastic welding is just as strong as the original molded plastic if done correctly. But this wasn't a structural part of the tank anyway, just a crack around the fuel cap area.@@apennameandthata2017
I bought the harbor freight iron. Fixed some large totes that had become quite damaged. Sharp learning curve but not a problem. Next is the heavy plastic bin from my wheel-barrow. It has a lot of damage. This is a great video. I used window screen, but steel wool looks better
Thank you for your comment, hope to see you in the next 321Tips
Good ideas. You can also use the glass fiber mesh used for dry wall crack repair for a stiffer repaired area.
Best plastic repair I have seen.
Thank you for your comment, hope to see you in the next 321Tips
A clever and green solution to an age old problem. Thanks for sharing!
@@supabiscuit
You are right of course, I was just thinking in terms of repair rather than replace.
cool, you are very kind
Steelwool & wireshield are both great ideas, this will come in handy some day.
Excellent video, short but full of good ideas.
Grateful
I have used used patio door screen for repairs to cracked garbage can lids with a soldering iron, worked GREAT. Thanks for tip on flatting copper tubing for making the tip.
You are a freaking genius! I will definitely be trying this. Thanks
Using steel wool is just genius. Thanks for sharing.
Hadn't seen the electric cable wiring before. Bonding two pieces of plastic with a heated piece of flat metal was pretty cool. It ensures both sides are melted at the same temp for a solid bond. Niceee.
Great video.
Very creative solutions for broken parts. Thank you for sharing.
Superb! For large repairs I use some of that black sanding mesh then iron on plastic of the same type if I can find it. The mesh gets hot enough to melt into the surface without being destroyed itself and it really keys well due to its rough surface. I also use wire wool and cyanoacrylate to build structure. You get some working time to mold shapes but the reaction gets very hot and can combust so always use metal tools to sculpt fillets or fill holes etc.
Excellent technique and photography. Thank you.
Brilliant! I love how you considered structural integrity. Now for the flip side of the first repair, you could add melted crayon for the visual.
One of the more helpful videos I have seen in my 73 years on this planet
Thank YOU
Great, we have several tips for soldering plastic ruclips.net/video/PofGsnVRB9o/видео.html
I can recall trying to melt cracked edges back together with a soldering gun, etc. Never really a success, it would still crack again that way. The idea of adding more plastic and metal strands of some kind looks like the fix, I never thought of that. The fallback was something like using epoxy but then that does not always adhere well under stress so the welding method is superior.
There are many tips, subscribe and enjoy
Żywica będzie dobrym łącznikiem o ile zostanie użyta do sporządzenia laminatu. Pękniecie, pierwszy przykład z filmu, trzeba otoczyć po lewej i prawej stronie szeregiem nawierconych otworów o średnicy 3mm a powierzchnia pękniętego plastiku powinna być zmatowana papierem ściernym i odtłuszczona. żywicę nakłada się jednostronnie przykrywając ją paskiem maty z włókna szklanego dokładnie przesycając matę żywicą, to samo robimy z drugiej strony tym razem również przesycamy żywicą matę szklaną tym razem dbając o dokładne wypełnienie nawierconych otworów. Dobrze jest gdy żywica zawiera drobno pocięte skrawki włókna szklanego. Po związaniu żywicy można powierzchnię obrobić mechanicznie, czy lakierować uważając by nie uszkodzić pasm maty szklanej.
I just took up welding plastic and I'm learning new tricks everytime I like the soldering iron Trek I just use a blowtorch and a hot knife so watching your video is a step up for me 😁👍🥃
Thank you for not having annoying music. Thumbs up for that and great video.
Kid really watched on mute and said thanks for no annoying music lmao
Very ingenious! Never seen steel wool used for plastic welding! I love steel wool for stuffing in holes in concrete to keep rodents out.
Great, we have several tips for soldering plastic ruclips.net/video/PofGsnVRB9o/видео.html
What a great set of solitons to some of my plastic problems. Thanks a lot!
There are many tips, subscribe and enjoy
Wow! Now this is a life-hack which will definitely help me! Thankyou!
thanks for your comment, thank you
This is so simple yet so amazing, thanks for posting.
thanks for your comment, thank you
Brilliant idea. I hope I remember it when i need it next! Thanks for contributing.
wow I have thrown so many things away because I did not know how to repair like this. Great thanks!
thank you very much you are very kind
This was super cool. You learn something new every day.
Wow, great repairs. Be sure you have proper ventilation. Plastic fumes may be toxic.
I agree with you
Wow! Amazing talent. Thank you for sharing.
Came for the repair, stayed for the piano. 😊
Hahaha that was a pretty good piano tune.
I also found a good melody
Pretty sure it’s the theme from the Princess Bride.
@@relishgargleryup. Came to the comments to see if anyone had noticed 😄
So the steel wool and shielding wire are acting like the fibres in fibreglass. Cool. I like the do-it-yourself plastic melting copper tip, too. Good job.
You can repair some broken plastic items by binding the break with string and covering with hot melt glue.
Similar repairs can be done with flyscreen and glue (petmesh flyscreen is incredibly strong), or cotton thread and glue, or hootchie cord and glue, etc.
safety note: steel wool can give you a nasty cut if you tear it apart with your fingers with great force. Either tear it gently or cut it with a tool.
That steel whool idea deserves a spot at the Nobel Prize
What the mute isnt telling you is that if you have a polypropylene lid like this and you take a nylon zip tie and try to melt it on there its prob not going to adhere. If it does its prob adhering to the steel wool. You need polypropylene to repair PP. Nylon for nylon ABS for ABS and PVC for PVC. And so on. You can buy multi packs of plastic welding rods on line. Or from ww grainger some harbor freight stores sell them as well. Most household plastics are PP. Check the recycle codes if you arent sure what plastic youre working with.
Cool, thanks for sharing your knowledge!
@@321tips if you do enough of this youll find yourself popping out answers to questions in conversations you werent part of. Ive caught myself doing my own thing and hear folks saying what does this triangle with a 4 or ? In it mean? Next thing im teaching a damn recycling training seminar. If you get into doing this look online if you do that sort of thing and buy a big ass package of welding rods with a plethora of fifferent plastics. It will make or break a project envolving non replaceable items. Car bumpers nose skins some fenders dash boards they can all be repaired. I hate buying crap online. Ww grainger has a good variety of rods. Craft stores may have them.
Great comment. I found this out a few months back, didn't have a clue why the plastic I was using wasn't adhering. Now I know.
In most cases yes, but there is exceptions like PP that can adhere to PE
Good advice David, cheers for that, Shane, New Zealand, :)
Very often these repair videos are just nonsense - but not this one. I already use ski base sticks (P-Tex candles) to weld plastic, but zip ties and wire wool/mesh was new.
It's not often I bookmark videos any more but I will this time. Very helpful, thanks.
Great, we have several tips for soldering plastic ruclips.net/video/PofGsnVRB9o/видео.html
Interesante método. Gracias por compartir
This is going to be very useful for me. Thank you. Subscribed
Phenomenal! May God Bless
Thanks! may he bless us all with a good heart
Lo de la lana y la malla, es GENIAL. FELICITACIONES Y GRACIAS POR COMPARTIR TUS CONOCIMIENTOS. Un saludo desde Argentina!!!!
Great, we have several tips for soldering plastic ruclips.net/video/PofGsnVRB9o/видео.html
Olá , Ótimo trabalho, muito obrigado pela dica!!!
thanks for your comment, thank you
That is a great presentation of a great fix!
Now, I will save braided wire for repairs.
My father showed me hot knife plastic welding years ago... it doesn't always work, but can be handy.
I've seen hot staple type hacks before, but the wire wool is a pretty good idea
A note to everyone: steel wool is flammable. I know it's hard to believe but it is. An open flame will ignite steel wool. Using an hot iron is probably safe. So use with caution and in a way you could put out a fire. Great idea though I would of thought of it, and really like the shielding wire method at the end. Good video
I think I’d use a mini torch rather than a lighter for better control, but other than that this is pretty solid.
Hot air gun.
That is one of the coolest ideas I've ever seen.
Parabéns pela ideia … digna de aplausos
Muitíssimo obrigado
👏👏
Great video, loved it. I have used a fine wire mesh in the past, I like the wool idea.
Excelente! muchas gracias!
Thanks, see you in the next video!
Wow. Melting plastic. What a new and innovative idea. Wish I knew plastic melted...
Just like fixing holes in a plastic boat with glassfiber 😊
Exactly
Obrigado! Me inscrevi no seu canal! Você deu dicas e vou utilizar para soldar os plásticos de uma carcaça de notebook que quebrou na área da dobradiça com a tela.
Show de bola parabéns 👏👏👏
There are many tips, subscribe and enjoy
Viva a internet e as câmeras de filmagem!!Assim, podemos aprender coisas que nunca imaginaríamos! From Brazil
I think the added bonus with using the steel wool is its ability to transfer the heat better. Just like the elementary school science class when you take the same wool and spread across the battery posts…INSTANT heat!
And using stainless steel wool would reduce the possibility of rust getting in and weakening the weld!👍
Bro, that's not how ANY of this works.
Steel wool gets hot when you connect battery posts because you've made a short circuit with electricity. The heat transfer rate of the steel has nothing to do with that situation, you would get the same heat from any conductive metal.
Plastic welds don't care about rust. It's plastic, not steel. You could use any metal wire and get the same, negligible I might add, benefit to these "welds" that are all completely useless functionally. You can't just melt random plastics into each other and expect proper bonding, much like you can't weld random types of steel together and get good results.
I know I'm wasting my breath, but for anyone who has no idea how to do this. Don't watch this video for advice.
@@adamyoung8289Ok, I’m listening; but, how would you do it to make it more durable?
Fantastic film, never thought of using steel wool, thank you I enjoy learning. 🍻👍👍👍
Show de bola
Vivendo e aprendendo
Essa é a intenção
brilliant! Simple, accessible, and clear
the steel wool is a great idea of reinforcing the fissure. you can also use a 3D printer pen if you just want to fill holes with ABS. (And pick a color of ABS you need)
Good idea
AMAZING TIPS!!!
Muito bom , 10.
Wow it's wonderful am now learning how to fix things myself
Pastic sticks exist To repair that
Not in my country that I know of though you can surely use epoxy and other compounds. This technique looks very interesting!
So does crazy glue, but imo you need to actually melt the parent material to truly bond a crack in plastic. This kinda seems to do it. Don’t you think?
Sometimes you have to use what you have on hand.
Steel wool is a great idea, thanks.
need to find a metal sheep first
Found one, but all clipper failed.
Just steel one
Very good. 👏🏿 I like all of these tips. Thank you for sharing.
You gained another Subscriber because of those great tips, keep them coming please. 👍
Thanks, I hope you too in other videos on the channel www.youtube.com/@321tips
Tremendo trabajo artesanal excelente. Gracias por la información. Saludos 🇨🇴🇨🇴🇨🇴
Your kindness, thank you
Very well done! Great ideas here. Also the music is awesome!
Thank you, it was very kind
other note besides the plastic types: common fine steel wool like that is carbon steel, it rusts very easily, so if the object gets wet, the exposed filaments will start to rust throughand create expanding cracking rust voids.
coarse steel wool pads used to clean pots and pans are stainless steel, I'm not aure if stainless steel wool is also made in fine grades. what is made as an alternative to fine steel wool and would oxidise more moderately is bronze wool. it's meant to be used for finishing tanning-rich woods like oak that would get black spots from steel wool fragments.
Sei un genio!! Cordiali saluti da Firenze
Excellent Ideas.
Congratulations.
Es la mejor idea q he visto para reparar los plásticos y así darles una nueva vida sin desecharlos!! Felicitaciones por el video es genial!! 👏👏👏👏👏😃 muchas gracias por subirlo!
Great, we have several tips for soldering plastic ruclips.net/video/PofGsnVRB9o/видео.html
Excelente idea, muchas gracias la voy a poner en práctica! Magnífico video!
cool, you are very kind
This video deserve more likes
cool, you are very kind
very nice and criative fix!.... Congratulations!....
* a good use for coax cable braid
* going to try the techniques demonstrated in the video for repairing plastic taillight lenses, plastic totes, and even vinyl items
Great video! The mesh balcony was spectacular! Congratulations 👏👏👏
How powerful is this soldering iron?
Thank you, this one around 70 watts
Great I have one of these! Now it's just a matter of making the pointer. Thanks! GO GO GO !!!
I can not believe it! Really thank you!