I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Recommend instead of reinforcing the plastic weld seam with nails, instead to embed used staples. They are smaller and fit within the plastic more easily but also the bent loop on both ends of the used staple holds well inside the plastic.
Embedding the staples was a cool idea. Using a nonessential piece of the parent material is key to success. A heat gun can work if you find rge correct mix of heating your additive material and the repair
Étant soudeur par métier et toujours par passion, j'ai été scotché par votre vidéo (vue en totalité sans pouvoir ciller...ça pique un peu 🙄). Je suis devenu très client de vidéo/tuto bricolages mais il me semblait en avoir fait le tour, surtout dans ma spécialité ébé j'ai encore appris qq trucs qui me seront bien utiles...et ça c'est top ! 👍👍👍😉 Bien que connaissent la soudure plastique, les idées d'utiliser des Rislan ou une découpe directe sur la pièce comme apport ainsi que la fabrication de la buse en cuivre sont réellement ingénieuses. Alors merci pour cette technique, ça paraît si évident après coup que ça en devient une preuve de sa qualité! Je devrais la mettre en pratique dès demain. Vous avez 1 Abo supplémentaire (et pas des moindre 😀), je suis curieux d'en voir plus !
Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!
this is the second video of yours I've watched in a row and I have to say I'm thoroughly impressed and that was with the first video...I'm a female but I've always had to fix my own sxxx so the "plastic" fixes are always a go to for me. I'm trying to figure out what kind of "hot " knife to use to cut thick plastic-not having a lot of luck ..suggestions? Excellent videos and very easy to learn form...thank you !
be sure to do this work outside with fan blowing fumes away. i personally knew a well recognized artist that worked using a torch to heat plastic buckets into sculptures. he developed a very rare lung cancer that killed him and was attributed to inhaled plastic fumes.
There are a number of different plastics all with different properties. It would be nice if you can identify the plastic you are working with, as not all plastics are this easy to weld.
Except for the dangerous fumes and the fact that most plastics will lose their initial properties and become brittle. Just look for a compatibilidade glue or epoxy glue you can add a metal or fibre glass mesh behind and it will actually fix the broken plastic
You must use the SAME KIND OF PLASTIC, or it will NOT hold. eg: bumper covers... Polypropylene and a wire screen with heat to fix cracks etc. .. you cannot use zip ties, they're the wrong kind of plastic
Stimmt. Um herauszufinden ob beide zueinander passen, mache den " Schnüffel -Test". Zünde deinen Kabelbinder an, ausblasen und riechen. Das gleiche mit dem was du schweißen willst. ( Ein kleiner Streifen mit einem Cutter reicht.) Riechen beide gleich, funktioniert es.😉
Dämmwolle sollte auch funktionieren. Es ist ja Glasfaser verstärkter Kunststoff. Das poliert immer schön die Schnecke und die Rückstrom -Sperre. Beides muss man an der Maschine öfters austauschen. Es schleift sich ein.😉
Ótimas dicas e excelente vídeo. Por favor, como é feita a limpeza das pontas dos ferros após a utilização, especialmente a que é feita de um tubo (na primeira parte do vídeo)? Imagino que deva ficar resíduo do material aplicado no interior do tubo aplicador. Somos da cidade Recife, localizada no Brasil 🇧🇷.
Hello! Welcome to Creation Holic channel! About cleaning the tip of soldering iron, I have film 1 video about it. Kindly check it out on my channel. Wishing you health and happiness always!
Bjr de Paris, je cherchai une idée de réparation de plastic depuis longtemps. Je vais essayer en protégeant mes bronches. Bravo pour cette démonstration.
Sand smooth with high grit (1000 TO 3000) paper and then apply Armor All or similar to bring back to almost orignal finish?! Like the idea. Thanks for sharing.
Not a bad idea at all. This way we can do wonderful things. Truly exceptional service indeed. ❤❤❤
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
İyi fikir kolay gelsin
Her Pilastik le her pilastge kaynak olurmu tutarmı yoksa kendi cinsinden mi olmalı tşk
Great ideas
Glad you think so!
Génial ! Simple, rapide et peu couteux . Un grand merci🤩
Hello! thanks for your comment. Wish you all the best!
ありがとうございました。すごく参考になりました。はんだゴテの利用と、先の部分の取り換えは目からうろこでした。素晴らしい。
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Viessmann
ViessmannCaldaie
No habia visto nada peor que esto... impresentable en todos los sentidos. No entiendo como hay personas que dicen "maravilloso"... "excelente" 🤦♂
Hello! thanks for your comment. Wish you all the best!
Bueno si usted sabe hacerlo de otra manera le agradecería mucho que nos enseñe,tengo que arreglar una baulera y no se como hacerlo
A great work 👍
Very good ideas 😊
Hello. Thanks for your positive feedback. Wish you all the best
Ok 🆗️ 👌 👏👏👏
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Recommend instead of reinforcing the plastic weld seam with nails, instead to embed used staples. They are smaller and fit within the plastic more easily but also the bent loop on both ends of the used staple holds well inside the plastic.
Hello! thanks for your recommendation. Wish you all the best!
@@creationholic101lmn
Sangat bagus ide nya bisa di terapkan untuk perbaikan atau perawatan plastik retak atau pecah sepeda motor matur nuwun terima kasih dari indonesia
Hello. Welcome to my channel. Thank you for your feedback!
Excelente la reparación Saludos desde Guadalajara Jalisco México
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Super 👌... Fajn videjko....
Embedding the staples was a cool idea. Using a nonessential piece of the parent material is key to success. A heat gun can work if you find rge correct mix of heating your additive material and the repair
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Thank you from Italy Teacher 👍👍
Hello! Welcome to my channel! I am glad you like these ideas. Wishing you all good things!
Kanka videolarını yeni keşfettim. Gerçekten harika tüyoların var. Başarılarının devamını diliyorum.
🇹🇷
Hello. Welcome to my channel. Hope you have a good time while watching the video!
@@creationholic101 Teşekkür ederim
SEI BRAVISSIMO!!! MI HAI APERTO UN MONDO... GRAZIEEEE 💖 DALL' ITALIA
I have seen it done with a hot melt glue gun.
Muito obrigado. Grande dica!
😍😍😍😘😘😘💕💕💕
Excellent !!! Merci. Vidéo nickel. Charles. France 😊
Hello! Welcome to Creation Holic channel! I am glad you like my ideas. Wishing you all good things!
Super sprawa dzięki bardzo za pomysły.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Respect from morocco
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Super jest to pomysł pozdrawiam twórcę tego filmiku 👍👍👍👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Top le tuto. Merci
D'île de France
Hello. Thanks for your positive feedback. Wish you all the best
Étant soudeur par métier et toujours par passion, j'ai été scotché par votre vidéo (vue en totalité sans pouvoir ciller...ça pique un peu 🙄).
Je suis devenu très client de vidéo/tuto bricolages mais il me semblait en avoir fait le tour, surtout dans ma spécialité ébé j'ai encore appris qq trucs qui me seront bien utiles...et ça c'est top ! 👍👍👍😉
Bien que connaissent la soudure plastique, les idées d'utiliser des Rislan ou une découpe directe sur la pièce comme apport ainsi que la fabrication de la buse en cuivre sont réellement ingénieuses.
Alors merci pour cette technique, ça paraît si évident après coup que ça en devient une preuve de sa qualité!
Je devrais la mettre en pratique dès demain.
Vous avez 1 Abo supplémentaire (et pas des moindre 😀), je suis curieux d'en voir plus !
Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!
Vous pensez que cela sera valables pour tous les plastiques, perso je doute
Super a velmi užitečné
Belle présentation des possibilités de réparations ! 😊
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
this is the second video of yours I've watched in a row and I have to say I'm thoroughly impressed and that was with the first video...I'm a female but I've always had to fix my own sxxx so the "plastic" fixes are always a go to for me. I'm trying to figure out what kind of "hot " knife to use to cut thick plastic-not having a lot of luck ..suggestions? Excellent videos and very easy to learn form...thank you !
"Thank you so much for your kind words! For cutting thick plastic, I recommend using a hot utility knife or a soldering iron blade."
be sure to do this work outside with fan blowing fumes away. i personally knew a well recognized artist that worked using a torch to heat plastic buckets into sculptures. he developed a very rare lung cancer that killed him and was attributed to inhaled plastic fumes.
Thanks for your reminder
Its a mesotelioma. A rare case of lung cancer !
44444444@@creationholic1014
Bravo ! Je salue vos aptitudes exceptionnelles en la matière et vous en remercie sincèrement.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
stosuje od lat tą 3 metode-pozdrawiam
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Très ingénieux l'idée du fer à souder
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Boas dicas nesse vídeo. Por isso já me inscrevi no canal. Obrigado.
Hello! thanks for your comment. Wish you all the best!
Top das galáxias
Eline emeğine sağlık çok güzel pratik fikirler sunuyorsunuz. Teşekkürler..
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
There are a number of different plastics all with different properties. It would be nice if you can identify the plastic you are working with, as not all plastics are this easy to weld.
Could you identify your plastics?
@@gilldanier4129ABS, PP, PE… in this video it’s abs
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Good 👍👍👍I'm from Thailand
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Except for the dangerous fumes and the fact that most plastics will lose their initial properties and become brittle. Just look for a compatibilidade glue or epoxy glue you can add a metal or fibre glass mesh behind and it will actually fix the broken plastic
hello and thank you very much for your recommendation! Wish you the best!
he can work over the fan to reduce the fumes. Also he can also use steel wool to add strength to the bond rather then staples.
This works well. If you heat it just enough to melt but not enough to smoke the plastic will remain flexible and strong.
Very clever thank you.
Thanks for watching! ☘☘☘😘😘😘💕💕💕
You must use the SAME KIND OF PLASTIC, or it will NOT hold. eg: bumper covers... Polypropylene and a wire screen with heat to fix cracks etc. .. you cannot use zip ties, they're the wrong kind of plastic
Stimmt. Um herauszufinden ob beide zueinander passen, mache den " Schnüffel -Test". Zünde deinen Kabelbinder an, ausblasen und riechen. Das gleiche mit dem was du schweißen willst. ( Ein kleiner Streifen mit einem Cutter reicht.) Riechen beide gleich, funktioniert es.😉
Dämmwolle sollte auch funktionieren. Es ist ja Glasfaser verstärkter Kunststoff. Das poliert immer schön die Schnecke und die Rückstrom -Sperre. Beides muss man an der Maschine öfters austauschen. Es schleift sich ein.😉
Hello! thanks for your comment. Wish you all the best!
👍👍👍👍👍👍 from Indonesia
Welcome to Creation Holic channel! Thank you so much for your support
Ótimas dicas e excelente vídeo. Por favor, como é feita a limpeza das pontas dos ferros após a utilização, especialmente a que é feita de um tubo (na primeira parte do vídeo)? Imagino que deva ficar resíduo do material aplicado no interior do tubo aplicador. Somos da cidade Recife, localizada no Brasil 🇧🇷.
想知道+1
Hello! Welcome to Creation Holic channel! About cleaning the tip of soldering iron, I have film 1 video about it. Kindly check it out on my channel. Wishing you health and happiness always!
❤❤❤
Je vous écris de strasbourg ....chapeau pour votre vidéo...cette technique va m'être utile pour réparer un pare boue....merci
Glad it helped!
fine ideas, though I urge you to do such plastic-melting OUTSIDE, as many potential toxins (to lungs and nervous system) are released when burnt.
4 L9s
Hello! thanks for your comment. Wish you all the best!
DF
Από την Ελλάδα
Muy buenos tus conocimientos ,soy de Brasil .
Poland 🇵🇱
Hello. Welcome to my channel. Hope you have a good time while watching the video!
ประเทศไทย ได้ความรู้ดีครับ ขอบคุณ
@@creationholic101😢😢😮😢Aw😢😮😮
من ایرانی هستم استان بوشهر(جنوب غربی)
Indonesia 🇮🇩
Απλη ρευστη κολα.με.μαγιρικη σοδα. Τελειο αποτελεσμα σε πεντε λεπτα!!😊😊😊😊😊😊
Hello! thanks for your recommendation. Wish you all the best!
Bravissimo complimenti per la tua invenzione!!
😮
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Excelente video. Lo pondré en práctica si así Dios me lo permite. Saludos desde Pacora caldas Colombia. Bendiciones
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Génial !
A recopier !😁
Hello. Welcome to my channel. Thank you for your feedback!
Muchas gracias por enseñar y compartir
¡De nada! Me alegra que el video te haya sido útil. Gracias por tu apoyo!
Bjr de Paris, je cherchai une idée de réparation de plastic depuis longtemps. Je vais essayer en protégeant mes bronches. Bravo pour cette démonstration.
Thank you for sharing your feedback and expressing your perspective
좋은 영상입니다.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Egy nagyon jó módszer az, hogy veszek egy újat.😊🕊
思いもつかない斬新なアイディアで素晴らしいです。私もバイクの部品修理に使います。ありがとうございました。
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Thanks a lot from Spain
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Çok güzel yöntemler. Teşekkür ederiz.
TÜRKİYE'den selamlar.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Nice ❤❤❤
Many many thanks
Excellent 👌
Thanks a lot 😊
รับชมจากระยองครับ เป็นการแบ่งปันความรู้ที่ดีมากครับ
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Complimenti hai avuto una bella idea
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Ciao dal Ungheria e Italia 👍
Welcome to my channel! Hope you have a good time while watching the video!
Thanks master 😊
Welcome to Creation Holic channel! Thank you so much for your support
Bjr, Merci pour votre vidéo et les bonnes idées de réparation. Bon courage, un fan d'Algérie.
Hello. Welcome to my channel. Hope you have a good time while watching the video!
From south korean... Thxs
De Colombia. Ignacio me gusta muy práctico y fácil de aplicar.😊
Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!
Sand smooth with high grit (1000 TO 3000) paper and then apply Armor All or similar to bring back to almost orignal finish?!
Like the idea. Thanks for sharing.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
My friend you are amazing well done. You also give us ideas for the adhesives. I am from Greece, a car mechanic but I also make plastics.
Thank you very much!
Bravo from Norway
Welcome to Creation Holic channel! Hope you have a good time while watching the video
I am in the USA. I like your content😊😊😊😊
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Venezuela gracias por tu video
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
the ideas are great. Thank you for making them
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Καλημέρα από Ελλάδα. Συγχαρητήρια για το κανάλι σου.
Welcome to Creation Holic channel! Thank you so much for your support
Outstanding repair
Çok güzel ve başarılı sonuç mükemmel tebrikler.🇹🇷
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
Magyarország, Nyírpazony.
Innen néztem a videód!
További jó munkát!
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Useful ! From Italy , Sardegna
Glad it was helpful!
Some nice tech here..... THANKS
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
Hello, I'm from Firenze, very interesting video!
Welcome to Creation Holic channel! Thank you so much for your support
Great way to heat weld 🎉🎉🎉🎉
Thanks 👍
Thank you . Great channel.
Thank you very much
Eline emeğine sağlık güzel olmuş
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Que buen trabajo. De Costa Rica Liberia Guanacaste. Saludos
Welcome to my channel! Thank you so much for your comment! have a nice day!
Soy colombiano y me gusta todo lo lo que tú enseñas espero que sigas mandando metes videos
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
انت مبدع ورائع 😮 معك يحي من السعودية
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Gracias. 👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Hola soy de Perú felicitaciones muy buenos tus consejos prácticos
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Genial...!!!
I'm from Spain
Welcome to Creation Holic channel! Thank you so much for your support
We are from Italy ,Como, very fine ideas
Hello. Welcome to my channel. Thank you for your feedback!
God work, amazings ideas
Hello. Welcome to my channel. Hope you have a good time while watching the video!
Tahiti.... Iaorana👋👍
Welcome to my channel! Thank you so much for your comment! have a nice day!
Herrlich.Vielen Dank
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Merci bcp👍👍👍🧠Je vous écoute de Québec
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Desde Almería ( España ).
Muy bueno el vídeo. Enhora buena
Hello! welcome to my channel. I am very happy to read your comment. Wish you have a nice day!
Great job. Hello from Romania.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Київ. Дякую за ідею!!!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Jsem z CZ HLUČÍNA a nápady jsou výborné 👍
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Buenas noches desde México lindo y querido
Welcome to Creation Holic channel! Thank you so much for your support
Bravo, il fallait penser👍.
Arnaud de France, Normandie
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Hi, from saudi arabia, good work.
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
very interesting idea
Thank you! Cheers!
Gracias por compartir. Saludos desde Mexicali, Mexico
Hello. Welcome to my channel. Thank you for your feedback!
merci . super ..
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Nice movie, good work! Thank you so much! 👏👏👏🙏👋🙂👍🤝🇸🇪🇸🇪🇸🇪
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful