I know it's 7 years after you posted this video, but wanted to say THANK YOU!! This helped me tremendously in removing my 2006 M35 driver's side panel so that I could swap out the master window switch assembly. Took less than 1/2 hour from start to finish thanks to this video - thank you, thank you, thank you!!!
Just switched mine out too I thought it would be a hard process and i was scared I was gonna mess something up but I replaced the master switch within 45 minutes thanks to the help of this video!!!
Between this video on how to remove/replace the door panel AND your mirror removal video, I was EASILY able to replace my 2006 Infiniti M35x passenger side mirror. It came apart and went back together again just as you have shown. The whole process was a fairly relaxed ~30-45 minutes from start to finish! KUDOS! I can't remember the last time I worked on a modern car and everything went as advertised. Thanks for posting this video! I also have a weak window motor on that door and I almost look forward to replacing it when it finally gives up the ghost. ;-)
Whaddup Ed. Good vid homie. My window motor went out the other day, scored one from JY for $20 and threw it in thanks to this vid. Keep doing yah thang my guy!!!
EdBwoy yeah, it took a little time and only snapped a plastic clip, but it's a replaceable one. The latch was seized, so I reached inside and moved it around, then sprayed the hell out of it. I unlatched the door from inside and it came open. It works fine now. I bought the car for parts for my 240. Rear lsd,axles, and 5 lug swap, but it was a nice car so I put it on insurance and it runs fine. They thought the trans was bad and I added fluid and it works fine. Bought it for 500 bucks. Everything works now.
The convenience button on the outside of my drivers door to lock/unlock has not worked since I got side swiped. Is this maybe a loose connection I can get to by removing door skin? Or something more complex
Another great video, thanks! I couldn't see clearly at the end, but does removing the panel give full access to the exterior door handle assembly (for replacement) or are there other connections, cables, wiring etc still blocking it's removal?I'm wary of attempting the panel removal and door handle assembly replacement, but if it's no more complicated than you've shown (thanks again) I might convince myself to give it a shot.
That's great, but I have a passenger door that will not open any suggestions? Had the same issue on the driver's side door but it was still in warranty at that time. So the dealer took care of it.
Is the handle getting stuck? Or the mechanism is broke & the handle loose? Someone in the comments section mentioned having such a problem & they only sacrificed one broken clip.
Thank you. This was enough information to instruct me on removing the driver side door panel. I was able to replace the window master switch. Really very helpful. thanx.
I hope you got it done safely. It has been a while since I touched the Y34 panel, but the principal was pretty much the same Nissan fare - screw behind door handle escutcheon, and others either on the handle pocket or underneath the handle.
Yes sir it's pretty easy helps to have pry tools OE specs for sure or gentle hands with gloves. The regulator is a like hand trap with gears shaped jagged with clamp and yes be very careful as can cause serious injury. Learned a lot from you, the channel and hands on.
Hey i just bought an 03 m45. I knew i had to get a new battery, but never had the time. The battery died and now i cant open the car door because the previous owner only had the key fob. Whats the best way to get into the car?
If the key fob didn't come with the blade insert, then the best way is to call a locksmith or AAA to unlock it. Ask if they can rekey the door too. I kept a plain blade key for emergencies
@@EdBwoy on the dash board there's a VDC LIGHT and a slip light both are on... i know that VDC stands Vehicle Dynamic control. i think both of the lights have something to do with the traction or the awd system. wanted to know what would make them stay on. and it looks like you know a great deal about these cars. i didn't want to take it to infinit was hoping it was something i could do myself. but if you find out anything let me know if you can.
You are welcome to post here in case your questions can be answered by someone else or others could benefit from the answers. But my email is edbwoy at gmail
I know it's 7 years after you posted this video, but wanted to say THANK YOU!! This helped me tremendously in removing my 2006 M35 driver's side panel so that I could swap out the master window switch assembly. Took less than 1/2 hour from start to finish thanks to this video - thank you, thank you, thank you!!!
You're most welcome. I am glad to hear that the video is still relevant even today.
Just switched mine out too I thought it would be a hard process and i was scared I was gonna mess something up but I replaced the master switch within 45 minutes thanks to the help of this video!!!
This gave me certainty. My front drivers door lock is tight from inside and the key hole. Thanks for this video!
Between this video on how to remove/replace the door panel AND your mirror removal video, I was EASILY able to replace my 2006 Infiniti M35x passenger side mirror. It came apart and went back together again just as you have shown.
The whole process was a fairly relaxed ~30-45 minutes from start to finish! KUDOS! I can't remember the last time I worked on a modern car and everything went as advertised.
Thanks for posting this video! I also have a weak window motor on that door and I almost look forward to replacing it when it finally gives up the ghost. ;-)
Whaddup Ed. Good vid homie. My window motor went out the other day, scored one from JY for $20 and threw it in thanks to this vid. Keep doing yah thang my guy!!!
Thanks man, I didn't know how similar these would be in the two cars, but I'm glad it helped get you straightened out.
UR video helps me bcuz I was trying to change driver side windows switch & I did it Thank you 4 showing close up & step by step
Awesome. I'm glad you enjoy the detail
Thank you so much for this post. My passenger side mirror was broken and this video made so simple to replace it. Thanks again!!!!
You're welcome M.
Simple enough. Got some work to do this week. Thanks
My door is stuck shut. This is genius. Thanks man.
King 250sx godspeed with your project! Seems like you've got quite a challenge on your hands
EdBwoy i got it. Thanks again for your help.
King 250sx you're welcome. Out of curiosity, we're you able to get the panel off with the door shut?
EdBwoy yeah, it took a little time and only snapped a plastic clip, but it's a replaceable one. The latch was seized, so I reached inside and moved it around, then sprayed the hell out of it. I unlatched the door from inside and it came open. It works fine now. I bought the car for parts for my 240. Rear lsd,axles, and 5 lug swap, but it was a nice car so I put it on insurance and it runs fine. They thought the trans was bad and I added fluid and it works fine. Bought it for 500 bucks. Everything works now.
Right on! That's a pretty good deal all around. Enjoy the car.
The convenience button on the outside of my drivers door to lock/unlock has not worked since I got side swiped. Is this maybe a loose connection I can get to by removing door skin? Or something more complex
Excellent video well done
Another great video, thanks!
I couldn't see clearly at the end, but does removing the panel give full access to the exterior door handle assembly (for replacement) or are there other connections, cables, wiring etc still blocking it's removal?I'm wary of attempting the panel removal and door handle assembly replacement, but if it's no more complicated than you've shown (thanks again) I might convince myself to give it a shot.
Unfortunately it is not a straight path to the door handle. It is manageable, but it is not a great open access
Do I have to remove the door panel in order to get the wood trim off ?
Yes, you do
That's great, but I have a passenger door that will not open any suggestions? Had the same issue on the driver's side door but it was still in warranty at that time. So the dealer took care of it.
Is the handle getting stuck? Or the mechanism is broke & the handle loose?
Someone in the comments section mentioned having such a problem & they only sacrificed one broken clip.
Cheers mate helped me heaps 👍
keep the vids coming!!
Also helpful thanks my guy much needed
You're most welcome. Good luck
Thank you. This was enough information to instruct me on removing the driver side door panel. I was able to replace the window master switch. Really very helpful. thanx.
Is the 03/04 gen same way? Has the mirror feature 1-2 set on driver side panel but other than that looks similar to the 2006 and up gen?
I hope you got it done safely. It has been a while since I touched the Y34 panel, but the principal was pretty much the same Nissan fare - screw behind door handle escutcheon, and others either on the handle pocket or underneath the handle.
Yes sir it's pretty easy helps to have pry tools OE specs for sure or gentle hands with gloves.
The regulator is a like hand trap with gears shaped jagged with clamp and yes be very careful as can cause serious injury.
Learned a lot from you, the channel and hands on.
Can you show how to remove the driver side master power window switch?
You asked for it. ruclips.net/video/LlOTom36Ub4/видео.html
Is it the same procedure as removing the 2003 m45?
No, it's not exactly the same. I saw some instructions on Nicoclub some time back
Can you show how to replace the front passenger door? I was in an accident and I need to replace it.
ruclips.net/video/FPGoYo1Duvs/видео.html
Do you know if you have to remove the driver side door panel to replace the master switch?
Yes, you have to. It is screwed in from the bottom.
EdBwoy Ok thanks again man. Very helpful tutorials that saves us a lot of money!
You're welcome bud. I think I recorded when I recently removed my switch. Hopefully I can locate that footage and upload it
EdBwoy please upload this reply video of the master power switch! Thanks
Thanks for the reminder. Things get hectic around here. I'll find it tonight
Hey i just bought an 03 m45. I knew i had to get a new battery, but never had the time. The battery died and now i cant open the car door because the previous owner only had the key fob. Whats the best way to get into the car?
If the key fob didn't come with the blade insert, then the best way is to call a locksmith or AAA to unlock it. Ask if they can rekey the door too. I kept a plain blade key for emergencies
get a key made from locksmith make sure the key they cut for you is compatible with v8
thanks! adding speakers to my m45s this saved me!!!
Great to hear. What kind of speakers are you going with?
EdBwoy pioneer 4 ohm even though amp is built for 2 ohm still works, added the speakers over the door where the speaker cover looks great
thanks for the video it helped
need one on how to get the backup cam to get the orange out when backing up to stay on
I'm not exactly clear on the issue you described.
@@EdBwoy oh ok
@@EdBwoy on the dash board there's a VDC LIGHT and a slip light both are on... i know that VDC stands Vehicle Dynamic control. i think both of the lights have something to do with the traction or the awd system. wanted to know what would make them stay on. and it looks like you know a great deal about these cars. i didn't want to take it to infinit was hoping it was something i could do myself. but if you find out anything let me know if you can.
@@EdBwoy OK HOW THIS.. HOW COME MY KEY FOB DOESN'T LET MY WINDOWS DOWN ANY MORE OR THE KEY AS WELL
Do you have a email I have a couple Questions about my 03 m45 that would be helpful if you could answer those
You are welcome to post here in case your questions can be answered by someone else or others could benefit from the answers. But my email is edbwoy at gmail