Edbwoy man thank you!! I just got into an accident and my front bumper was pushed in on the passenger corner. My insurance was going to charge me $3000 to replace my bumper and light, with painting etc. I think you just saved me 3k!!
Thank you, very helpful, The process is similar to our Toyota van. I'm not sure why manufacturers have made it difficult just to change a busted light bulb or headlamp but that's the world we live in. Great vid.
Thanks man. I agree it complicates a lot of processes but I also see an advantage in a way. #1 being safety/security. It might not stop someone from stealing your expensive HID bulbs if they really want to, but it will sure slow them down and cause a scene. Then esthetics and packaging.
Thank you, very helpful. I need to change the HID ballast on the base of the headlight housing. Pausing now as I cannot get the housing out as I need disconnect the coupling to each bulb and afraid of cracking or damaging the old clips.
This is amazing! I am thankful you made this video as I am going to be undertaking my first project to replace the light assembly and the fog lamps. I searched and searched and there is scarce videos for the M. This was great! Can you say what make and model your electric wrench is?
The tool is an Ingersoll Rand, W5300 Angle Impactool. The fog light is obviously much easier, but I hope this video makes the headlight job less daunting
Большое спасибо. Я рад это слышать. Я стараюсь следить за тем, чтобы за видео было легко следить, и когда есть что-то очень важное, я также записываю это в видео.
That was translated from Google, lol. Thank you very much. I am happy to hear that. I try to make sure the videos are easy to follow, and when there is something very important, I also write it in the video.
What does that grey plug in do @3:18 in the headlight area? Mine is unplugged but my headlights still work well besides my hid bulb that slowly burnt out.
@@EdBwoy oh ok so it's for the swivel motor I guess. I changed my left side HID bulb today after following ur instructions on how to remove fender liner. I didn't have to Jack up the car and got pretty good access by just turning the wheel. Did a pretty good job besides breaking off a couple plastic fasteners and snapping a bolt off for the bumper cuz it was really rusted.
My A/C Just Went Out, Got On Rocket Auto For Compressor, Condenser, Exchange Valve, And O-Ring Gaskets Cost Me $600, Do A Video On What Happens When Your Ac Compressor Seizes Lol
@@maximus1318able it depends on how badly you want to address the cosmetics. I'd much rather take the time to remove the bumper than risk breaking some tabs that will leave me with a loose grille.
@@TRIIXXII_ all 3 cars in these video are m45s. The gold and silver ones in the garage belong to other people. The black one outside is mine but needs an engine. I listed it for sale with all the others but hasn't sold yet. If you want it, we can talk about it
Great To See You Do This Edbwoy For Everyone. When We First Discuss This You Had No Video Wonderful For Other Owners.
That's why I recently asked if you had already done it. I had recorded videos some time back, just hadn't gotten around to editing and posting it.
Edbwoy man thank you!! I just got into an accident and my front bumper was pushed in on the passenger corner. My insurance was going to charge me $3000 to replace my bumper and light, with painting etc. I think you just saved me 3k!!
very straight forward and easy, thanks man
Thank you, very helpful, The process is similar to our Toyota van. I'm not sure why manufacturers have made it difficult just to change a busted light bulb or headlamp but that's the world we live in. Great vid.
Thanks man.
I agree it complicates a lot of processes but I also see an advantage in a way. #1 being safety/security. It might not stop someone from stealing your expensive HID bulbs if they really want to, but it will sure slow them down and cause a scene.
Then esthetics and packaging.
Thank you, very helpful. I need to change the HID ballast on the base of the headlight housing. Pausing now as I cannot get the housing out as I need disconnect the coupling to each bulb and afraid of cracking or damaging the old clips.
Thank you a million for this video I would never have found that bolt at the top on each side of the bumper and I need to replace my bumper
Greatly appreciated. Using this as my blueprint to replace my passenger fender and light
Right on! All the best with the repairs. Heres the headlight video - ruclips.net/video/JA_s1z_UWtQ/видео.html
@@EdBwoy appreciate it my guy. Just earned yourself a subscriber
You make it look so easy...just saved me some $$$...thank you as always.
Great video! I had to do this to replace my headlight assemblies.
Why were you replacing the headlights?
@@EdBwoy There was a crack in the lens that was allowing water to get in and my headlight wouldn't work until all the water and condensation dried.
@@whuzup3 Damn! Glad you're taking care of that, and can drive in the rain again.
Need videos on how to get to the blend door actuators.....
I haven't done any
Good video, I just want to remove the fog button lights
Thank you.
This is amazing! I am thankful you made this video as I am going to be undertaking my first project to replace the light assembly and the fog lamps. I searched and searched and there is scarce videos for the M. This was great! Can you say what make and model your electric wrench is?
The tool is an Ingersoll Rand, W5300 Angle Impactool.
The fog light is obviously much easier, but I hope this video makes the headlight job less daunting
@@EdBwoy aàq
Great video thank you for sharing, awesome, job!!!
i’m replacing my fender and front bumper, do i have to put one on before the other for them to go on right or it doesn’t matter?
Is the m45 and m35 radiator support bracket the same or compatible?
Hey man do you know if we can put a 08-09 front bumper on a 06-07?
я не мало понимаю английский, ер в твоих видео все понятно =) красавчк !!! теперь мне проще мою nissan fuga чинить =)
Большое спасибо. Я рад это слышать. Я стараюсь следить за тем, чтобы за видео было легко следить, и когда есть что-то очень важное, я также записываю это в видео.
That was translated from Google, lol.
Thank you very much. I am happy to hear that. I try to make sure the videos are easy to follow, and when there is something very important, I also write it in the video.
you have any advice on the removal of a starter for a 07 Infiniti m45?
This video should give you an idea of what is involved (engine removal not necessary) ruclips.net/video/aWUr7yxtasA/видео.html
Could u tell me how to remove the grille?
I haven't made any specific grille removal tutorial, but if you watch the last 2 or so minutes of this video, it should give you a pretty good idea
What does that grey plug in do @3:18 in the headlight area? Mine is unplugged but my headlights still work well besides my hid bulb that slowly burnt out.
Most likely the AFS motor. Look at 3:58 of this video
ruclips.net/video/JA_s1z_UWtQ/видео.html
@@EdBwoy oh ok so it's for the swivel motor I guess. I changed my left side HID bulb today after following ur instructions on how to remove fender liner. I didn't have to Jack up the car and got pretty good access by just turning the wheel. Did a pretty good job besides breaking off a couple plastic fasteners and snapping a bolt off for the bumper cuz it was really rusted.
Thanks a million
I have a question, I search for m45 parts but a bunch of m35 parts pop up do you by any chance know If they fit the same , example fender and hood
As long as you're shopping for the 2006-2010 models, the body of the car is the same between V6 and V8.
My A/C Just Went Out, Got On Rocket Auto For Compressor, Condenser, Exchange Valve, And O-Ring Gaskets Cost Me $600, Do A Video On What Happens When Your Ac Compressor Seizes Lol
Do you sell these pieces or any where we can buy these car parts
I don't sell them. I just record videos of some of my projects.
I buy my parts online mostly.
For some strange f'n reason, I can't get the damn grille off to paint it. I dont want to pull harder bc i feel like i'm going to break the damn thing.
Pull harder, it feels like it will break, but as long as you pull straight out it wont brake. But it feels bad doing it
Even with the bumper out?
@@EdBwoy was trying to avoid taking the bumper off. Should I nust do that then?
@@maximus1318able it depends on how badly you want to address the cosmetics. I'd much rather take the time to remove the bumper than risk breaking some tabs that will leave me with a loose grille.
@@EdBwoy hey man I need to change a front crash zone sensor do I need to take the bumper off
Is this the one your still selling?
Which one, the tan colored one? That's not my car. It's at my place for an engine replacement.
@@EdBwoy im talking about the m45 v8
@@TRIIXXII_ all 3 cars in these video are m45s. The gold and silver ones in the garage belong to other people. The black one outside is mine but needs an engine. I listed it for sale with all the others but hasn't sold yet. If you want it, we can talk about it