Husqvarna Blower carb rebuild and fuel line replacement

Поделиться
HTML-код
  • Опубликовано: 5 июн 2023
  • For most people, I recommend buying a carb kit with lines and being done with it they are super easy to replace. In this video we dig in a little deeper and look at what it take to rebuild one.
    Thanks for watching! If this helped, SUBSCRIBE! It's free and it helps us make more (and better) videos. I do my best to respond to all comments. Thanks
  • ХоббиХобби

Комментарии • 37

  • @mr1pearl
    @mr1pearl Год назад +2

    1/4 turn and you got that thing running like it should good stuff Bill 👍

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад

      Thanks. It's a busy one to work on, but they push a lot of air when they are running right

  • @rogermcdonald1607
    @rogermcdonald1607 Год назад +2

    Bill, i really liked the message on your shirt! Lol. Every time i see your ultrasonic cleaner, it makes me think i need to buy one. The blower is running great after the fuel lines rotting from some good old Iowa ethanol. We'll send another shipment down so you will always have video content. Lol. Im looking forward to your next mini bike video. ✌👍🎥🇺🇸

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      Thanks, some love the shirts. Some hats them. Tell your wife the cleaner is for her jewelry so it looks almost as good as she does. (Worked for me lol )
      The next minibike is Saturday, a nice little Hornet from the 70's, it looks like time forgot it.... until you open the carb.

    • @EverydayProjects
      @EverydayProjects Год назад

      I like a T-shirt I saw one time that said " I was left unsupervised so it's not my fault !" hahaha that's me for sure!

  • @DIYVariety
    @DIYVariety Год назад +2

    Great jon bill, yeah carb spray dont do it all the time. I use spray nine, that stuff works great. Cheers bill

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      Thanks. I had one off a minibike where the bowl was sealed with a river. Carb spray wouldn't help there at all

  • @barryewalt3250
    @barryewalt3250 Год назад

    Another good fix Bill👍

  • @BensWorkshop
    @BensWorkshop Год назад

    Good work Bill, an good tune too.

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      Thanks, it's a bit more work with that one. I was surprised it needed any tuning. Usually rebuilds are good to go

    • @BensWorkshop
      @BensWorkshop Год назад +1

      @@GuysPlayingWithTools I can see that, but as you aid, maybe someone tuned it a little with a dirty carb and bad diaphragm.

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      @@BensWorkshop That's what I was thinking too, trying to adjust old out of it

  • @robertmailhos8159
    @robertmailhos8159 Год назад +1

    That is a entertaining one that is where you have to disassemble it in order to get the carburetor off 📴😂

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      The governor linkage holds it hostage. 🙄

    • @robertmailhos8159
      @robertmailhos8159 Год назад +1

      @@GuysPlayingWithTools with this one being in that situation is a strange thing to have to deal with it but you got it running again and your getting it done with great patience

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      @Robert Mailhos Thanks, when you get one like that, patience is your best friend

    • @robertmailhos8159
      @robertmailhos8159 Год назад

      @@GuysPlayingWithTools you definitely got this to the letter right BILL 💸💵

  • @lewiemcneely9143
    @lewiemcneely9143 Год назад +1

    Good fix but you just don't or didn't see Husky blowers here. Echo, yes and maybe a Still now and then but Huskys are scarce, or were. I've been out of that loop and plan to keep it that way except for right here with an Echo and a Stihl. One for each hand is plenty. So keep the planes out of the shop and fix on!

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад

      It felt like they were going to take the chimney out a couple times. That particular fix applies to just about every 2 stroke blower out there

    • @lewiemcneely9143
      @lewiemcneely9143 Год назад +1

      @@GuysPlayingWithTools I've put kits in various things but not in mine BUT they went down the road with the rest of the stuff. Now I get to start over with a limited variety. Keep your face pretty and you knew that was coming.

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад

      I knew 🤣
      The nice part of not having a lot of variety is that you don't need to keep a lot of kits. I only keep 4 types handy, and one of the bunch usually works

    • @lewiemcneely9143
      @lewiemcneely9143 Год назад

      @@GuysPlayingWithTools I gave all my stuff to my son-in-law and we have battery stuff now. She got a Kobalt kit and I got DeWalt because I had the stuff to run the impact and drill driver that has never been used. Just hangs there. She got the Stihl hand mower too. We/I still have a Stihl and Echo gas blower for leaves. I blow with the Echo and the Stihl has the vacuum kit I leave on it till the leaves get done.

    • @lewiemcneely9143
      @lewiemcneely9143 Год назад

      @@GuysPlayingWithTools We're in the hills so they have to be picky about how they go by or it could be REALLY bad.

  • @EverydayProjects
    @EverydayProjects Год назад

    Nice job, Bill. Are you going to test drive this blower out on the street? Oh, wait...It's not a motorbike. I have a replacement carburator for my husqvarna weed wacker that has to be done soon. You are looking very young these days, Bill. That's not a pick-up line, just an observation from one old man to another! I know Wayne has a crush and I won't interfere in another man's dreams. haha It must be all that Texas sunhine having a effect on you but it could be the water?

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      We are in Holland today, a lot cooler than Texas! I test drove it by holding it in one hand while driving the blue minibike(next video) 😁

    • @EverydayProjects
      @EverydayProjects Год назад

      @@GuysPlayingWithTools I remember you mentioning a trip during one of your live video sessions. I've been to Den Helder when I served in the Navy and a family member married a lady from Delft. Enjoy the flowers and have fun. (now I know what reallly keeps you looking so young).

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      @@EverydayProjects uh-oh, you found my secret. It really is about refusing to be my age... I think the calendar overestimates how long I have been around.

    • @EverydayProjects
      @EverydayProjects Год назад

      @@GuysPlayingWithTools Just to keep things in perspective (and to keep you from being too proud) we must also remember how old you looked while test driving the go cart at home and on the street. In that instance, you looked 85, so I think it is more of a short circuit in the time machine than any hard fact about confusion over the calandar. Just keeping your feet on the ground, Bill.

    • @GuysPlayingWithTools
      @GuysPlayingWithTools  Год назад +1

      The calendar reminds me... every day. 🤣