Baja Designs Squadron Amber Sport Fog Light Install & Light Output Test - 2019 Toyota Tacoma 3rd Gen

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 38

  • @hugomunoz1059
    @hugomunoz1059 Год назад +1

    Beautiful truck!!
    Can you do a quick video of you sitting inside with just the fog lights on thank you

  • @FoxVelox222
    @FoxVelox222 3 года назад +2

    Thank you for the install video with no fluff just what I was looking for

  • @jonathanmorgan4916
    @jonathanmorgan4916 3 года назад +1

    Great video, I subscribed. The demonstration on how to install the brackets to the lights was very helpful. As was the information on what wires to put together in the adapter.

    • @GearheadJT
      @GearheadJT  3 года назад

      Awesome, thank you! Glad to hear the video helped!

  • @stacky512a
    @stacky512a Месяц назад

    Glock perfection!

  • @MrAvenger05
    @MrAvenger05 3 года назад +2

    Going to do the same set up you got. Great videos

  • @ryanread5727
    @ryanread5727 4 года назад +3

    the fogs look brighter than the high beans XD

    • @GearheadJT
      @GearheadJT  4 года назад

      Oh yeah, the Baja Sports are super bright!

  • @Tacotuesdayyy
    @Tacotuesdayyy 3 года назад +1

    Awesome! Debating whether to get these or diode dynamics ss3 fog lights

  • @SpookyMontero
    @SpookyMontero 2 года назад

    sweet going to get these for my Corolla but clear lens turns out tacomas & Corollas use the the same fog lights I’m pretty sure I won’t be blinding anyone with how low level the lights are

  • @stacky512a
    @stacky512a Месяц назад

    Need two hands in there to install the BD lights. Real pita

  • @LevelUpMechanics
    @LevelUpMechanics 4 года назад +2

    Awesome fog lamps!

  • @reesepeterson7293
    @reesepeterson7293 Год назад

    Forgive me if you stated it in the video, but these *aren't* the SAEs, right?

  • @chrissayno21
    @chrissayno21 4 года назад +1

    So easy! Thanks for this!

  • @holahola6292
    @holahola6292 6 месяцев назад

    I have a trd pro and want to remove the rigid fogs and install these .is this the same method for the trd pro or does it differ

  • @noereyes4215
    @noereyes4215 4 года назад +1

    Look nice , thanks for the video

  • @ra64mike29
    @ra64mike29 3 года назад +2

    Are they adjustable at all? Just installed on my tacoma and they are bright as shit. I would like to angle them down if possible.

    • @GearheadJT
      @GearheadJT  3 года назад +1

      Good question, you could try adding washers to the bottom bolts to angle them down lower.

    • @Justbuyout
      @Justbuyout 3 года назад

      Are you worried about blinding other drivers? I think there is an interchangeable lens from Baja that gets the beam pattern more in line with SAE output that isn't as bright for oncoming traffic if you're using it daily rather than for strictly off road.

    • @ra64mike29
      @ra64mike29 3 года назад

      Exactly. I had issues with every on coming driver flashing me. Ended up selling them for the diode dynamics ss3 fogs. A bunch of people told me the sae complaint Baja design’s suck.

  • @markclemens5066
    @markclemens5066 Год назад

    Will these fit a 2022 Tacoma TDR offroad 4x4

  • @Ram-vt3rm
    @Ram-vt3rm 4 года назад +1

    Great video.

  • @beyond1347
    @beyond1347 3 года назад

    Where can I get the harness adapter?

  • @MrBurch555
    @MrBurch555 3 года назад +1

    Are they dot approved? Or to bright for on road use?

    • @GearheadJT
      @GearheadJT  3 года назад +2

      These specific ones are not, BD Does make DOT/SAE Approved ones. And I'm that guy, that keeps these on for on road use, they are bright and love them. I haven't had anyone flash me yet at night, and haven't been pulled over. I would say due to the height of the truck the headlights blind people more vs the BD's.

    • @MrBurch555
      @MrBurch555 3 года назад

      @@GearheadJT perfect thanks for the reply im gonna grab a set

  • @Nicholas-db5sl
    @Nicholas-db5sl 2 года назад

    Awesome

  • @davidsilvaco
    @davidsilvaco 3 года назад

    The bolts that go into the housings are pretty tight on mine and I can't get them on unless I used some force. Does that sound right or am I going to cross thread them? The ends of the bolt have a light brown color and it stops there.

    • @ra64mike29
      @ra64mike29 3 года назад

      Yea they’re all like that.

  • @benderbendingrodriguez2868
    @benderbendingrodriguez2868 2 года назад +1

    I would love these if they werent $400+

    • @GearheadJT
      @GearheadJT  2 года назад

      They are pricey, however worth it if you're looking for a lot of light output.

  • @SwampFeet678
    @SwampFeet678 10 месяцев назад

    Not one shot of you sitting in the truck, at night, with the lights on. I want to see the light output, not pretty pictures of your truck with a fancy drone.