Watching you spray looked so chaotic and random I couldn't even keep up... It's not like the other spraying videos I've seen.... BUT the results speak for themselves!!! The finish at the end looked absolutely flawless! You're a magician 🧙♂️
The thing I like about you Mr. Dutch car painter, is you spray at a good PSI. You can HEAR the difference. It really atomizes the material and lays down really flat, Good job.
Good afternoon Edwin, your right, a fantastic finish to end the week with. Really good looking finish and shine. You take care and have a good weekend. Thanks
Мне бы руки поотрывали если бы я так красил!!! Можно было один елемент роздуть а он ещё два соседних вцепил ! ПОД ПРИБОР УЖЕ ПОЛ МАШИНЫ ЗАПОРОТО ВЫШЛО!
Judging by his application, i would say either Standoblue (Standox waterborne) or Spies Hecker Hi-Tec (Spies waterborne.) Both of which are Axalta and essentially the same system under different names. If so, you have recommended shaded high build primer to avoid using wet on wet (primer sealer) all the time. Some blues especially with this system can cover over lighter shades.
It's blender help you painting speally on blend panel some time it's hot your over sprays goes on blend panel and get dry this blender help stays over srapy wet and mealt in
Its called color blender. Its essentially a clear basecoat. You mix it with the color basecoat in different ratios depending on what coat youre on. Also he sprays the "color blender" on the panel first for what you call a "wet bed". I usually never do a wet bed. But its an option.
Ηello friend... Another perfect finish from the perfect painter! Usually you don't do a mist coat when you apply the first coat of clear... Do you trying something different?
@@Speedy123youknowme 30 psi is normally what is used, yes it has a lot of overspray but I have tested 20 psi and yes it has much less overspray but you get more orange peel. unless you are replicating the exact orange peel from the oem finish 30 psi is required for decent results. overspray is different on each gun however the main goal is to achieve a match or a good finish, overspray is not taken to account. what good is less overspray if you get garbage finish or you have to spend time cutting and buffing and also shooting more clear because you don't have enough build left from the cutting and buffing? your focus is on the wrong things
Watching you spray looked so chaotic and random I couldn't even keep up... It's not like the other spraying videos I've seen.... BUT the results speak for themselves!!! The finish at the end looked absolutely flawless! You're a magician 🧙♂️
D
Even this dutch boy abandons his precious little SATA 😮 respect for IWATA THE KING
This has been performed as an art. Welldone Dutch car painter.
Always nice job keep up the good work i used be a spraypainter too but not anymore
Good job like always 💪
The thing I like about you Mr. Dutch car painter, is you spray at a good PSI. You can HEAR the difference. It really atomizes the material and lays down really flat, Good job.
❤❤❤❤good job ❤❤
Takes me back to the 90's using Gip-Fast 60 in my workshop...loved those days...hard work but good fun
Nice clean work!
Beautiful spraying, I love it
Hola excelente trabajo saludos desde bs as Argentina
Good afternoon Edwin, your right, a fantastic finish to end the week with. Really good looking finish and shine. You take care and have a good weekend. Thanks
Nice job thanks 🙏
Great job friend
Hallo,
Nice job, you paint or you repair also as fixing body kits?.
VERY NICE WORK.
Good job 👍
Nice work
I'm car spray painter with 7 years experience, i wish i could work with your company
Odličan posao...
muy buen trabajo,a seguir asi,un saludo desde españa
nice 👌 man
God bless you
Nice job which product and which one you apply before the paint and which pistol you are using thanks for sharing
Base de água ...top... blinder em volta...pra não manchar
Beautiful
Good paint aplicetion
Was that a wetbed before your first coat of clean And if so at what PSI are you spraying it?
What a colour perfect as always 👍 take it easy bud..
Nice job 👍 pls can you tell me more about this your painting work
Nice 👍 job please let me know why you didn’t blend on back door , thanks
Do you put demin water in your color blend ? It’s not going milky as it should and it’s wetting very very easy..
👍👍👍 good 🙋
🤩wow nice
Very good 👍👍
Mooi gedaan 👍🏾
Dankje
Amazing🇦🇱
Водичка конечно сила и парень рукастый,красавец!
How many times did you spray lacquer, and how many minutes after...
Nice job...
Nice paint
Good job my friend...
nice job bro...
Please tell me for blend base coat how much tinnier did you add to colour my mean is for your first spray base coat
Good job bro
I am painter
Nd u painting do excellent
So nice big brother
Que buen trabajo que configuración le diste a la pintola
Super guru
Toi rat thich nhung cach lam nhu vay lam ok
Great bro
good job ...
What did you mix with the car paint for it to make shinny
Muito legal
Hai pro i am indea Tamilnadu nic work sir
Nice
You are very hardworking like me 😉
Tuyệt quá
would like to know which aircap nozzle setup you use?
Beautiful job ! Thumbs up 👍🏾
Good job
Молодец мастер
Muy bonito
Perfeito
How many turns out of paint material did you set your gun to ?
Мне бы руки поотрывали если бы я так красил!!! Можно было один елемент роздуть а он ещё два соседних вцепил !
ПОД ПРИБОР УЖЕ ПОЛ МАШИНЫ ЗАПОРОТО ВЫШЛО!
what paint brand are you using?
didnt it require a darker GShade?
Ravenna Blue is a nice colour to paint!
Good job!
Joaquim Bot
Judging by his application, i would say either Standoblue (Standox waterborne) or Spies Hecker Hi-Tec (Spies waterborne.) Both of which are Axalta and essentially the same system under different names. If so, you have recommended shaded high build primer to avoid using wet on wet (primer sealer) all the time. Some blues especially with this system can cover over lighter shades.
I am a painter and I'm proud of my work
NEW 👏👏👏👏👏👏
why do i enjoy this?
Very good job 👍👍👍
Good
Good job my frend I have a question . what material did you put first with gun
Rudy Montoya basecoat blender
It's blender help you painting speally on blend panel some time it's hot your over sprays goes on blend panel and get dry this blender help stays over srapy wet and mealt in
@@jiwandhaliwal2120 y
Nice sir which fun use sir
What clear are you spraying
Cara spray terlalu lebar dan boros bahan cat... Saya suka dengan spray gun nya.. Merk apa dan harga berapa..??
Excelente trabajo seria formidable si pusieran subtitulos en español para nosotros los latinos, gracias si indicas graduacion de la pistola
Good job, you paint booth need clean, haha
Hi brother I want to ask you something about the product you used at first thanks
Hi mi friend i Wang to ask You something about the product You used first???? Ty
@@danydeak1852 i am use Glasurit 90-M4 before waterbase colorcoat
Gan supar ....
What was the very first coat you sprayed??was it laquer..?
Its called color blender. Its essentially a clear basecoat. You mix it with the color basecoat in different ratios depending on what coat youre on. Also he sprays the "color blender" on the panel first for what you call a "wet bed". I usually never do a wet bed. But its an option.
Крутяк!
👍😎
cool 💪☕
My favourite car Painter , always very inspiring to watch your work , hope to see you on youtube soon 👍
Ηello friend... Another perfect finish from the perfect painter! Usually you don't do a mist coat when you apply the first coat of clear... Do you trying something different?
Para no mover las particulas de difuminado o perlas
Good jop 😊😊😊
good
Süper 👍👍👍👍👍👍
👍👏👏👏👏👏🇧🇷Brasil
👍
🏎
nice job, what's brand of your paint gun? tekna
Thanks, is Devilbiss
나이스샷
Showwww
How much pressure you use on the clearcoat?
28-35, test if you can use 35 psi with good results, if not try 30
I wonder the same ? Sounded really high and there was a lot of off spray from high pressure I would assume
@@Speedy123youknowme 30 psi is normally what is used, yes it has a lot of overspray but I have tested 20 psi and yes it has much less overspray but you get more orange peel. unless you are replicating the exact orange peel from the oem finish 30 psi is required for decent results. overspray is different on each gun however the main goal is to achieve a match or a good finish, overspray is not taken to account. what good is less overspray if you get garbage finish or you have to spend time cutting and buffing and also shooting more clear because you don't have enough build left from the cutting and buffing? your focus is on the wrong things
What colour less paint u sprayed first
Nice job buddy
what was that very first coat?
Gti pro daa
👌👍👍👍
Good job, but I expected a bit mor acrobatic while moving around the car. 😀👍
Quick question... What is it that u spray on the vehicle before u spray it?
A so called blender, to blend the color without overspray and better blendzone
Why did you spray lacquer before painting...
💓💓💓💓💓